CustomsMobile

Heading / Subheading	Stat Suffix	Article Description	Unit of Quantity	Rates of Duty
Heading / Subheading	Stat Suffix	Article Description	Unit of Quantity	1-General	1-Special	2
		I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
7201		Pig iron and spiegeleisen in pigs, blocks or other primary forms:
7201.10.00	00	Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus	t	Free ^[1]		$1.11/t ^[2]
7201.20.00	00	Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus	t	Free ^[3]		$1.11/t
7201.50		Alloy pig iron; spiegeleisen:
7201.50.30	00	Alloy pig iron	t	Free ^[3]		$1.11/t
7201.50.60	00	Spiegeleisen	t	Free ^[3]		0.5%
7202		Ferroalloys:
		Ferromanganese:
7202.11		Containing by weight more than 2 percent of carbon:
7202.11.10	00	Containing by weight more than 2 percent but not more than 4 percent of carbon	kg, Mn kg	1.4% ^[3]	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	6.5%
7202.11.50	00	Containing by weight more than 4 percent of carbon	kg, Mn kg	1.5% ^[1]	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	10.5% ^[2]
7202.19		Other:
7202.19.10	00	Containing by weight not more than 1 percent of carbon	kg, Mn kg	2.3% ^[3]	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	22%
7202.19.50	00	Containing by weight more than 1 percent but not more than 2 percent of carbon	kg, Mn kg	1.4% ^[3]	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	6.5%
		Ferrosilicon:
7202.21		Containing by weight more than 55 percent of silicon:
		Containing by weight more than 55 percent but not more than 80 percent of silicon:
7202.21.10	00	Containing by weight more than 3 percent of calcium	kg, Si kg	1.1% ^[1]	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	11.5% ^[2]
7202.21.50	00	Other	kg, Si kg	1.5% ^[3]	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	11.5%
7202.21.75	00	Containing by weight more than 80 percent but not more than 90 percent of silicon	kg, Si kg	1.9% ^[3]	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	9%
7202.21.90	00	Containing by weight more than 90 percent of silicon	kg, Si kg	5.8% ^[3]	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	40%
7202.29.00		Other		Free ^[1]		4.4¢/kg on silicon content ^[2]
7202.29.00	10	Containing by weight over 2 percent of magnesium	kg, Si kg
7202.29.00	50	Other	kg, Si kg
7202.30.00	00	Ferrosilicon manganese	kg, Mn kg	3.9% ^[1]	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	23% ^[2]
		Ferrochromium:
7202.41.00	00	Containing by weight more than 4 percent of carbon	kg, Cr kg	1.9% ^[1]	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	7.5% ^[2]
7202.49		Other:
7202.49.10	00	Containing by weight more than 3 percent of carbon	kg, Cr kg	1.9% ^[1]	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	7.5% ^[2]
7202.49.50		Other		3.1% ^[3]	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	30%
7202.49.50	10	Containing by weight more than 0.5 percent of carbon	kg, Cr kg
7202.49.50	90	Other	kg, Cr kg
7202.50.00	00	Ferrosilicon chromium	kg, Cr kg	10% ^[3]	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7202.60.00	00	Ferronickel	kg, Ni kg	Free ^[4]		6.6¢/kg
7202.70.00	00	Ferromolybdenum	kg, Mo kg	4.5%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	31.5% ^[2]
7202.80.00	00	Ferrotungsten and ferrosilicon tungsten	kg, W kg	5.6% ^[3]	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	35%
		Other:
7202.91.00	00	Ferrotitanium and ferrosilicon titanium	kg	3.7% ^[3]	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7202.92.00	00	Ferrovanadium	kg, V kg	4.2% ^[1]	Free (A+, AU, BH, CL, CO, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25% ^[2]
7202.93		Ferroniobium:
7202.93.40	00	Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon	kg	5% ^[4]	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7202.93.80	00	Other	kg	5% ^[5]	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7202.99		Other:
7202.99.10	00	Ferrozirconium	kg	4.2% ^[3]	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7202.99.20	00	Calcium silicon	kg	5% ^[3]	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7202.99.80		Other		5%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7202.99.80	20	Ferrophosphorus	kg
7202.99.80	40	Other	kg
7203		Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms:
7203.10.00	00	Ferrous products obtained by direct reduction of iron ore	t	Free ^[1]		$2.21/t ^[2]
7203.90.00	00	Other	t	Free ^[3]		$2.21/t
7204		Ferrous waste and scrap; remelting scrap ingots of iron or steel:
7204.10.00	00	Waste and scrap of cast iron	t	Free ^[3]		74¢/t
		Waste and scrap of alloy steel:
7204.21.00	00	Of stainless steel	t	Free ^[1]		74¢/t ^[2]
7204.29.00	00	Other	t	Free ^[1]		74¢/t ^[2]
7204.30.00	00	Waste and scrap of tinned iron or steel	t	Free ^[3]		Free
		Other waste and scrap:
7204.41.00		Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles		Free ^[3]		74¢/t
7204.41.00	20	No. 1 bundles	t
7204.41.00	40	No. 2 bundles	t
7204.41.00	60	Borings, shovelings and turnings	t
7204.41.00	80	Other	t
7204.49.00		Other		Free ^[1]		74¢/t ^[2]
7204.49.00	20	No. 1 heavy melting	t
7204.49.00	40	No. 2 heavy melting	t
		Other:
7204.49.00	60	Cut plate and structural	t
7204.49.00	70	Shredded	t
7204.49.00	80	Other	t
7204.50.00	00	Remelting scrap ingots	t	Free ^[3]		74¢/t
7205		Granules and powders, of pig iron, spiegeleisen, iron or steel:
7205.10.00	00	Granules	kg	Free ^[3]		3%
		Powders:
7205.21.00	00	Of alloy steel	kg	Free ^[3]		45%
7205.29.00	00	Other	t	Free ^[1]		$2.21/t ^[2]
		II. IRON AND NONALLOY STEEL
7206		Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
7206.10.00	00	Ingots	kg	Free ^{[6], [5]}		20%
7206.90.00	00	Other	kg	Free ^{[6], [4]}		20%
7207		Semifinished products of iron or nonalloy steel:
		Containing by weight less than 0.25 percent of carbon:
7207.11.00	00	Of rectangular (including square) cross section, the width measuring less than twice the thickness	kg	Free ^{[6], [4]}		20%
7207.12.00		Other, of rectangular (other than square) cross section		Free ^{[6], [4]}		20% ^[2]
7207.12.00	10	Having a width measuring less than four times the thickness	kg
7207.12.00	50	Having a width measuring at least four times the thickness	kg
7207.19.00		Other		Free ^{[6], [4]}		20%
7207.19.00	30	Of circular cross section	kg
7207.19.00	90	Other	kg
7207.20.00		Containing by weight 0.25 percent or more of carbon		Free ^{[6], [4]}		20%
		Of rectangular (including square) cross section:
7207.20.00	25	Having a width measuring less than four times the thickness	kg
7207.20.00	45	Having a width measuring at least four times the thickness	kg
7207.20.00	75	Of circular cross section	kg
7207.20.00	90	Other	kg
7208		Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
7208.10		In coils, not further worked than hot-rolled, with patterns in relief:
7208.10.15	00	Pickled	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
		Other:
7208.10.30	00	Of a thickness of 4.75 mm or more	kg	Free ^{[6], [4]}		20% ^[2]
7208.10.60	00	Of a thickness of less than 4.75 mm	kg	Free ^{[6], [4]}		20% ^[2]
		Other, in coils, not further worked than hot-rolled, pickled:
7208.25		Of a thickness of 4.75 mm or more:
7208.25.30	00	Of high-strength steel	kg	Free ^{[6], [4]}		20% ^[2]
7208.25.60	00	Other	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7208.26.00		Of a thickness of 3 mm or more but less than 4.75 mm		Free ^{[6], [4]}		0.4¢/kg + 20%
7208.26.00	30	High-strength steel	kg
7208.26.00	60	Other	kg
7208.27.00		Of a thickness of less than 3 mm		Free ^{[6], [4]}		0.4¢/kg + 20%
		High-strength steel:
7208.27.00	40	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	kg
7208.27.00	45	Other	kg
7208.27.00	60	Other	kg
		Other, in coils, not further worked than hot-rolled:
7208.36.00		Of a thickness exceeding 10 mm		Free ^{[6], [4]}		20% ^[2]
7208.36.00	30	High-strength steel	kg
7208.36.00	60	Other	kg
7208.37.00		Of a thickness of 4.75 mm or more but not exceeding 10 mm		Free ^{[6], [4]}		20% ^[2]
7208.37.00	30	High-strength steel	kg
7208.37.00	60	Other	kg
7208.38.00		Of a thickness of 3 mm or more but less than 4.75 mm		Free ^{[6], [4]}		20% ^[2]
7208.38.00	15	High-strength steel	kg
		Other:
7208.38.00	30	With untrimmed edges	kg
7208.38.00	90	Other	kg
7208.39.00		Of a thickness of less than 3 mm		Free ^{[6], [4]}		20% ^[2]
		High-strength steel:
7208.39.00	20	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	kg
7208.39.00	25	Other	kg
		Other:
7208.39.00	30	With untrimmed edges	kg
7208.39.00	90	Other	kg
7208.40		Not in coils, not further worked than hot-rolled, with patterns in relief:
7208.40.30		Of a thickness of 4.75 mm or more		Free ^{[6], [4]}		20% ^[2]
7208.40.30	30	Of a thickness exceeding 10 mm	kg
7208.40.30	60	Other	kg
7208.40.60		Of a thickness of less than 4.75 mm		Free ^{[6], [4]}		20% ^[2]
7208.40.60	30	Of a thickness less than 3 mm	kg
7208.40.60	60	Other	kg
		Other, not in coils, not further worked than hot-rolled:
7208.51.00		Of a thickness exceeding 10 mm		Free ^{[6], [4]}		20% ^[2]
7208.51.00	30	Universal mill plate	kg
		Other:
7208.51.00	45	Of high-strength steel	kg
7208.51.00	60	Other	kg
7208.52.00	00	Of a thickness of 4.75 mm or more but not exceeding 10 mm	kg	Free ^{[6], [4]}		20% ^[2]
7208.53.00	00	Of a thickness of 3 mm or more but less than 4.75 mm	kg	Free ^{[6], [4]}		20% ^[2]
7208.54.00	00	Of a thickness of less than 3 mm	kg	Free ^{[6], [4]}		20% ^[2]
7208.90.00	00	Other	kg	Free ^{[6], [4]}		20% ^[2]
7209		Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
		In coils, not further worked than cold-rolled (cold-reduced):
7209.15.00	00	Of a thickness of 3 mm or more	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7209.16.00		Of a thickness exceeding 1 mm but less than 3 mm		Free ^{[6], [5]}		0.4¢/kg + 20% ^[2]
		Of high-strength steel:
		Annealed:
7209.16.00	40	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	kg
7209.16.00	45	Other	kg
7209.16.00	60	Other	kg
		Other:
7209.16.00	70	Annealed	kg
7209.16.00	91	Other	kg
7209.17.00		Of a thickness of 0.5 mm or more but not exceeding 1 mm		Free ^{[6], [4]}		0.4¢/kg + 20% ^[2]
		Of high-strength steel:
		Annealed:
7209.17.00	40	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	kg
7209.17.00	45	Other	kg
7209.17.00	60	Other	kg
		Other:
7209.17.00	70	Annealed	kg
7209.17.00	91	Other	kg
7209.18		Of a thickness of less than 0.5 mm:
7209.18.15		Of high-strength steel		Free ^{[6], [4]}		0.4¢/kg + 20%
7209.18.15	30	Annealed	kg
7209.18.15	60	Other	kg
		Other:
7209.18.25		Of a thickness of less than 0.361 mm (blackplate)		Free ^{[6], [4]}		20%
7209.18.25	20	Annealed	kg
7209.18.25	85	Other	kg
7209.18.60		Other		Free ^{[6], [4]}		0.4¢/kg + 20% ^[2]
7209.18.60	20	Annealed	kg
7209.18.60	90	Other	kg
		Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25.00	00	Of a thickness of 3 mm or more	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7209.26.00	00	Of a thickness exceeding 1 mm but less than 3 mm	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7209.27.00	00	Of a thickness of 0.5 mm or more but not exceeding 1 mm	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7209.28.00	00	Of a thickness of less than 0.5 mm	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7209.90.00	00	Other	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7210		Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:
		Plated or coated with tin:
7210.11.00	00	Of a thickness of 0.5 mm or more	kg	Free ^{[6], [4]}		6%
7210.12.00	00	Of a thickness of less than 0.5 mm	kg	Free ^{[6], [4]}		6%
7210.20.00	00	Plated or coated with lead, including terne-plate	kg	Free ^{[6], [4]}		6%
7210.30.00		Electrolytically plated or coated with zinc		Free ^{[6], [4]}		21.5%
7210.30.00	30	Of high-strength steel	kg
7210.30.00	60	Other	kg
		Otherwise plated or coated with zinc:
7210.41.00	00	Corrugated	kg	Free ^{[6], [4]}		21.5% ^[2]
7210.49.00		Other		Free ^{[6], [4]}		21.5% ^[2]
		Of high-strength steel:
7210.49.00	40	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	kg
7210.49.00	45	Other	kg
		Other:
7210.49.00	91	Of a thickness of 0.4 mm or more	kg
7210.49.00	95	Other	kg
7210.50.00		Plated or coated with chromium oxides or with chromium and chromium oxides		Free ^{[6], [4]}		45%
7210.50.00	20	Of a width less than 1050 mm	kg
7210.50.00	90	Other	kg
		Plated or coated with aluminum:
7210.61.00	00	Plated or coated with aluminum-zinc alloys	kg	Free ^{[6], [4]}		21.5% ^[2]
7210.69.00	00	Other	kg	Free ^{[6], [4]}		21.5% ^[2]
7210.70		Painted, varnished or coated with plastics:
7210.70.30	00	Not coated or plated with metal and not clad	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7210.70.60		Other		Free ^{[6], [4]}		21.5% ^[2]
		Zinc coated or plated:
7210.70.60	30	Electrolytically coated or plated	kg
7210.70.60	60	Other	kg
7210.70.60	90	Other	kg
7210.90		Other:
7210.90.10	00	Clad	kg	Free ^{[6], [4]}		30%
		Other:
7210.90.60	00	Electrolytically coated or plated with base metal	kg	Free ^{[6], [4]}		45%
7210.90.90	00	Other	kg	Free ^{[6], [4]}		21.5%
7211		Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:
		Not further worked than hot-rolled:
7211.13.00	00	Universal mill plate	kg	Free ^{[6], [4]}		20%
7211.14.00		Other, of a thickness of 4.75 mm or more		Free ^{[6], [5]}		20%
7211.14.00	30	Of high-strength steel	kg
		Other:
7211.14.00	45	Not in coils	kg
7211.14.00	90	Other	kg
7211.19		Other:
		Of a width of less than 300 mm:
7211.19.15	00	Of high-strength steel	kg	Free ^{[6], [4]}		25%
		Other:
7211.19.20	00	Of a thickness exceeding 1.25 mm	kg	Free ^{[6], [4]}		25%
7211.19.30	00	Other	kg	Free ^{[6], [4]}		25%
		Other:
7211.19.45	00	Of high-strength steel	kg	Free ^{[6], [4]}		20%
		Other:
7211.19.60	00	Pickled	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7211.19.75		Other		Free ^{[6], [5]}		20%
		In coils:
7211.19.75	30	With untrimmed edges	kg
7211.19.75	60	Other	kg
7211.19.75	90	Other	kg
		Not further worked than cold-rolled (cold-reduced):
7211.23		Containing by weight less than 0.25 percent of carbon:
		Of a width of less than 300 mm:
		Of a thickness exceeding 1.25 mm:
7211.23.15	00	Of high-strength steel	kg	Free ^{[6], [4]}		25%
7211.23.20	00	Other	kg	Free ^{[6], [4]}		25%
7211.23.30	00	Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	kg	Free ^{[6], [5]}		25%
7211.23.45	00	Of a thickness not exceeding 0.25 mm	kg	Free ^{[6], [4]}		25%
7211.23.60		Other		Free ^{[6], [4]}		0.4¢/kg + 20%
7211.23.60	30	Of a thickness exceeding 1.25 mm	kg
7211.23.60	60	Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	kg
7211.23.60	90	Of a thickness not exceeding 0.25 mm:	kg
7211.29		Other:
		Of a width of less than 300 mm:
7211.29.20		Of a thickness exceeding 0.25 mm		Free ^{[6], [4]}		25%
7211.29.20	30	Of a width less than 51 mm, in coils	kg
7211.29.20	90	Other	kg
7211.29.45	00	Other	kg	Free ^{[6], [4]}		25%
7211.29.60		Other		Free ^{[6], [4]}		0.4¢/kg + 20%
7211.29.60	30	Of a thickness exceeding 1.25 mm	kg
7211.29.60	80	Other	kg
7211.90.00	00	Other	kg	Free ^{[6], [5]}		20%
7212		Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:
7212.10.00	00	Plated or coated with tin	kg	Free ^{[6], [4]}		6%
7212.20.00	00	Electrolytically plated or coated with zinc	kg	Free ^{[6], [4]}		21.5%
7212.30		Otherwise plated or coated with zinc:
		Of a width of less than 300 mm:
7212.30.10		Of a thickness exceeding 0.25 mm or more		Free ^{[6], [4]}		25%
7212.30.10	30	Of a width less than 51 mm, in coils	kg
7212.30.10	90	Other	kg
7212.30.30	00	Other	kg	Free ^{[6], [5]}		25%
7212.30.50	00	Other	kg	Free ^{[6], [4]}		21.5%
7212.40		Painted, varnished or coated with plastics:
7212.40.10	00	Of a width of less than 300 mm	kg	Free ^{[6], [5]}		25% ^[2]
7212.40.50	00	Other	kg	Free ^{[6], [4]}		0.4¢/kg + 20% ^[2]
7212.50.00	00	Otherwise plated or coated	kg	Free ^{[6], [4]}		21.5%
7212.60.00	00	Clad	kg	Free ^{[6], [4]}		30%
7213		Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
7213.10.00	00	Concrete reinforcing bars and rods	kg	Free ^{[6], [4]}		20% ^[2]
7213.20.00		Other, of free-cutting steel		Free ^{[6], [4]}		5.5%
7213.20.00	10	Containing by weight 0.1 percent or more of lead	kg
7213.20.00	80	Other	kg
		Other:
7213.91		Of circular cross section measuring less than 14 mm in diameter:
7213.91.30		Not tempered, not treated and not partly manufactured		Free ^{[6], [5]}		5.5%
7213.91.30	11	Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter	kg
7213.91.30	15	Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter	kg
7213.91.30	20	Of welding quality wire rods of a kind described in statistical note 7 to this chapter	kg
7213.91.30	93	Other	kg
		Other:
7213.91.45	00	Containing by weight 0.6 percent or more of carbon	kg	Free ^{[6], [5]}		5.5%
7213.91.60	00	Other	kg	Free ^{[6], [4]}		6%
7213.99.00		Other		Free ^{[6], [4]}		5.5%
		Of circular cross section:
7213.99.00	30	With a diameter of 14 mm or more but less than 19 mm	kg
7213.99.00	60	With a diameter of 19 mm or more	kg
7213.99.00	90	Other	kg
7214		Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
7214.10.00	00	Forged	kg	Free ^[6]		20%
7214.20.00	00	Concrete reinforcing bars and rods	kg	Free ^{[6], [4]}		20% ^[2]
7214.30.00		Other, of free-cutting steel		Free ^{[6], [4]}		20%
7214.30.00	10	Containing by weight 0.1 percent or more of lead	kg
7214.30.00	80	Other	kg
		Other:
7214.91.00		Of rectangular (other than square) cross-section		Free ^{[6], [4]}		20%
		Containing by weight less than 0.25 percent of carbon:
7214.91.00	16	With a maximum cross section less than 152 mm	kg
7214.91.00	20	With a maximum cross section of 152 mm or more	kg
7214.91.00	60	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	kg
7214.91.00	90	Containing by weight 0.6 percent or more of carbon	kg
7214.99.00		Other		Free ^{[6], [4]}		20% ^[2]
		Rounds:
		Containing by weight less than 0.25 percent of carbon:
7214.99.00	16	With a diameter less than 76 mm	kg
7214.99.00	21	With a diameter of 76 mm or more but not exceeding 152 mm	kg
7214.99.00	26	With a diameter exceeding 152 mm	kg
		Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7214.99.00	31	With a diameter less than 76 mm	kg
7214.99.00	36	With a diameter of 76 mm or more but not exceeding 152 mm	kg
7214.99.00	40	With a diameter exceeding 152 mm	kg
7214.99.00	45	Containing by weight 0.6 percent or more of carbon	kg
		Other:
7214.99.00	60	Containing by weight less than 0.25 percent of carbon	kg
7214.99.00	75	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	kg
7214.99.00	90	Containing by weight 0.6 percent or more of carbon	kg
7215		Other bars and rods of iron or nonalloy steel:
7215.10.00		Of free-cutting steel, not further worked than cold-formed or cold-finished		Free ^{[6], [4]}		0.3¢/kg + 20%
7215.10.00	10	Containing by weight 0.1 percent or more of lead	kg
7215.10.00	80	Other	kg
7215.50.00		Other, not further worked than cold-formed or cold-finished		Free ^{[6], [4]}		0.3¢/kg + 20%
		Containing by weight less than 0.25 percent of carbon:
7215.50.00	16	With a diameter or cross section measuring less than 76 mm	kg
7215.50.00	18	With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm	kg
7215.50.00	20	With a diameter or cross section exceeding 228 mm	kg
		Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7215.50.00	61	With a diameter or cross section measuring less than 76 mm	kg
7215.50.00	63	With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm	kg
7215.50.00	65	With a diameter or cross section exceeding 228 mm	kg
7215.50.00	90	Containing by weight 0.6 percent or more of carbon	kg
7215.90		Other:
		Plated or coated with metal:
7215.90.10	00	Not cold-formed	kg	Free ^{[6], [4]}		0.4¢/kg + 20%
7215.90.30	00	Cold-formed	kg	Free ^{[6], [4]}		0.3¢/kg + 20%
7215.90.50	00	Other	kg	Free ^{[6], [4]}		0.3¢/kg + 20%
7216		Angles, shapes and sections of iron or nonalloy steel:
7216.10.00		U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm		Free ^{[6], [4]}		2%
7216.10.00	10	U sections	kg
7216.10.00	50	Other	kg
		L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
7216.21.00	00	L sections	kg	Free ^{[6], [4]}		2%
7216.22.00	00	T sections	kg	Free ^{[6], [4]}		2%
		U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
7216.31.00	00	U sections	kg	Free ^{[6], [4]}		2%
7216.32.00	00	I sections (standard beams)	kg	Free ^{[6], [4]}		2%
7216.33.00		H sections		Free ^{[6], [4]}		2%
7216.33.00	30	Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm	kg
7216.33.00	60	Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm	kg
7216.33.00	90	Other	kg
7216.40.00		L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more		Free ^{[6], [4]}		2%
7216.40.00	10	L sections	kg
7216.40.00	50	Other	kg
7216.50.00	00	Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded	kg	Free ^{[6], [4]}		2%
		Angles, shapes and sections, not further worked than cold-formed or cold-finished:
7216.61.00	00	Obtained from flat-rolled products	kg	Free ^[3]		20%
7216.69.00	00	Other	kg	Free ^[1]		20% ^[2]
		Other:
7216.91.00		Cold-formed or cold-finished from flat-rolled products		Free ^[1]		20% ^[2]
7216.91.00	10	Drilled, notched, punched or cambered	kg
7216.91.00	90	Other	kg
7216.99.00		Other		Free ^{[6], [4]}		20%
7216.99.00	10	Drilled, notched, punched or cambered	kg
7216.99.00	90	Other	kg
7217		Wire of iron or nonalloy steel:
7217.10		Not plated or coated, whether or not polished:
		Containing by weight less than 0.25 percent of carbon:
		Flat wire:
7217.10.10	00	Of a thickness not exceeding 0.25 mm	kg	Free ^{[6], [4]}		25%
7217.10.20	00	Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	kg	Free ^{[6], [4]}		25%
7217.10.30	00	Of a thickness exceeding 1.25 mm	kg	Free ^{[6], [4]}		25%
		Round wire:
7217.10.40		With a diameter of less than 1.5 mm		Free ^[7]		25%
		Heat treated:
7217.10.40	40	In coils weighing not more than 2 kilograms	kg
7217.10.40	45	Other	kg
7217.10.40	90	Other	kg
7217.10.50		With a diameter of 1.5 mm or more		Free ^{[6], [4]}		7%
7217.10.50	30	Heat treated	kg
7217.10.50	90	Other	kg
7217.10.60	00	Other wire	kg	Free ^{[6], [4]}		25% ^[2]
		Other:
7217.10.70	00	Flat wire	kg	Free ^{[6], [4]}		25%
7217.10.80		Round wire		Free ^{[6], [4]}		25%
		Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7217.10.80	10	Heat treated	kg
7217.10.80	20	Other	kg
		Containing by weight 0.6 percent or more of carbon:
		Heat treated:
7217.10.80	25	With a diameter of less than 1.0 mm	kg
7217.10.80	30	With a diameter of 1.0 mm or more but less than 1.5 mm	kg
7217.10.80	45	With a diameter of 1.5 mm or more	kg
		Other:
7217.10.80	60	With a diameter of less than 1.0 mm	kg
7217.10.80	75	With a diameter of 1.0 mm or more but less than 1.5 mm	kg
7217.10.80	90	With a diameter of 1.5 mm or more	kg
7217.10.90	00	Other wire	kg	Free ^{[6], [4]}		25% ^[2]
7217.20		Plated or coated with zinc:
7217.20.15	00	Flat wire	kg	Free ^{[6], [4]}		26%
		Round wire:
7217.20.30	00	With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon	kg	Free ^{[6], [4]}		7% ^[2]
7217.20.45		Other		Free ^{[6], [4]}		25%
		With a diameter of less than 1.0 mm:
7217.20.45	10	Containing by weight less than 0.25 percent of carbon	kg
7217.20.45	20	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	kg
7217.20.45	30	Containing by weight 0.6 percent or more of carbon	kg
		With a diameter of 1.0 mm or more but less than 1.5 mm:
7217.20.45	40	Containing by weight less than 0.25 percent of carbon	kg
7217.20.45	50	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	kg
7217.20.45	60	Containing by weight 0.6 percent or more of carbon	kg
		With a diameter of 1.5 mm or more:
7217.20.45	70	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	kg
7217.20.45	80	Containing by weight 0.6 percent or more of carbon	kg
		Other:
7217.20.60	00	Containing by weight less than 0.25 percent of carbon	kg	Free ^{[6], [4]}		25%
7217.20.75	00	Other	kg	Free ^{[6], [4]}		26%
7217.30		Plated or coated with other base metals:
7217.30.15		Flat wire		Free ^{[6], [4]}		26%
7217.30.15	30	Containing by weight 0.6 percent or more of carbon	kg
7217.30.15	60	Other	kg
		Round wire:
7217.30.30	00	With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon	kg	Free ^{[6], [4]}		7%
7217.30.45		Other		Free ^[7]		25%
7217.30.45	04	Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding	kg
		Other:
		With a diameter of less than 1.0 mm:
7217.30.45	11	Containing by weight less than 0.25 percent of carbon	kg
7217.30.45	20	Containing by weight 0.25 percent or more but less than 0.6 percent or carbon	kg
7217.30.45	30	Containing by weight 0.6 percent or more of carbon	kg
		With a diameter of 1.0 mm or more but less than 1.5 mm:
7217.30.45	41	Containing by weight less than 0.25 percent of carbon	kg
7217.30.45	50	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	kg
7217.30.45	60	Containing by weight 0.6 percent or more of carbon	kg
7217.30.45	90	With a diameter of 1.5 mm or more	kg
		Other:
7217.30.60	00	Containing by weight less than 0.25 percent of carbon	kg	Free ^{[6], [4]}		25%
7217.30.75	00	Other	kg	Free ^{[6], [4]}		26%
7217.90		Other:
7217.90.10	00	Coated with plastics	kg	Free ^{[6], [4]}		2%
7217.90.50		Other		Free ^{[6], [4]}		35%
7217.90.50	30	Containing by weight less than 0.25 percent of carbon	kg
7217.90.50	60	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	kg
7217.90.50	90	Containing by weight 0.6 percent or more of carbon	kg
		III. STAINLESS STEEL
7218		Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
7218.10.00	00	Ingots and other primary forms	kg	Free ^{[6], [4]}		29%
		Other:
7218.91.00		Of rectangular (other than square) cross-section		Free ^{[6], [4]}		29%
		Having a width less than four times the thickness:
7218.91.00	15	Having a cross-sectional area of less than 232 cm²	kg
7218.91.00	30	Having a cross-sectional area of 232 cm² or more	kg
7218.91.00	60	Having a width at least four times the thickness	kg
7218.99.00		Other		Free ^{[6], [4]}		29%
		Of square cross section:
7218.99.00	15	Having a cross-sectional area of less than 232 cm²	kg
7218.99.00	30	Having a cross-sectional area of 232 cm² or more	kg
		Of circular cross section:
7218.99.00	45	Having a cross-sectional area of less than 232 cm²	kg
7218.99.00	60	Having a cross-sectional area of 232 cm² or more	kg
7218.99.00	90	Other	kg
7219		Flat-rolled products of stainless steel, of a width of 600 mm or more:
		Not further worked than hot-rolled, in coils:
7219.11.00		Of a thickness exceeding 10 mm		Free ^{[6], [4]}		29%
7219.11.00	30	Of a width not exceeding 1575 mm	kg
7219.11.00	60	Of a width exceeding 1575 mm	kg
7219.12.00		Of a thickness of 4.75 mm or more but not exceeding 10 mm		Free ^{[6], [4]}		29%
7219.12.00	02	Not annealed or not pickled	kg
		Other:
7219.12.00	06	Of high-nickel alloy steel	kg
		Other:
		Of a width of 1370 mm or more:
		Of a thickness exceeding 6.8 mm:
7219.12.00	21	Of a width not exceeding 1575 mm	kg
7219.12.00	26	Of a width exceeding 1575 mm	kg
		Other:
7219.12.00	51	Of a width not exceeding 1575 mm	kg
7219.12.00	56	Of a width exceeding 1575 mm	kg
		Other:
		Containing more than 0.5 percent by weight of nickel:
7219.12.00	66	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7219.12.00	71	Other	kg
7219.12.00	81	Other	kg
7219.13.00		Of a thickness of 3 mm or more but less than 4.75 mm		Free ^{[6], [4]}		29%
7219.13.00	02	Not annealed or not pickled	kg
		Other:
7219.13.00	31	Of a width of 1370 mm or more	kg
		Other:
		Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.13.00	51	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7219.13.00	71	Other	kg
7219.13.00	81	Other	kg
7219.14.00		Of a thickness of less than 3 mm		Free ^{[6], [5]}		29%
7219.14.00	30	Of a width of 1370 mm or more	kg
		Other:
7219.14.00	65	Of high-nickel alloy steel	kg
7219.14.00	90	Other	kg
		Not further worked than hot-rolled, not in coils:
7219.21.00		Of a thickness exceeding 10 mm		Free ^{[6], [4]}		29%
7219.21.00	05	Of high-nickel alloy steel	kg
		Other:
7219.21.00	20	Of a width not exceeding 1575 mm	kg
7219.21.00	40	Of a width exceeding 1575 mm but not exceeding 1880 mm	kg
7219.21.00	60	Of a width exceeding 1880 mm	kg
7219.22.00		Of a thickness of 4.75 mm or more but not exceeding 10 mm		Free ^{[6], [4]}		29%
7219.22.00	05	Of high-nickel alloy steel	kg
		Other:
		Containing more than 0.5 percent by weight of nickel:
		Containing more than 1.5 percent but less than 5 percent by weight of molybdenum:
7219.22.00	15	Of a width not exceeding 1575 mm	kg
7219.22.00	20	Of a width exceeding 1575 mm but not exceeding 1880 mm	kg
7219.22.00	25	Of a width exceeding 1880 mm	kg
		Other:
7219.22.00	35	Of a width not exceeding 1575 mm	kg
7219.22.00	40	Of a width exceeding 1575 mm but not exceeding 1880 mm	kg
7219.22.00	45	Of a width exceeding 1880 mm	kg
		Other:
7219.22.00	70	Of a width not exceeding 1575 mm	kg
7219.22.00	75	Of a width exceeding 1575 mm but not exceeding 1880 mm	kg
7219.22.00	80	Of a width exceeding 1880 mm	kg
7219.23.00		Of a thickness of 3 mm or more but less than 4.75 mm		Free ^{[6], [4]}		29%
7219.23.00	30	Of a width of 1370 mm or more	kg
7219.23.00	60	Other	kg
7219.24.00		Of a thickness of less than 3 mm		Free ^{[6], [4]}		29%
7219.24.00	30	Of a width of 1370 mm or more	kg
7219.24.00	60	Other	kg
		Not further worked than cold-rolled (cold-reduced):
7219.31.00		Of a thickness of 4.75 mm or more		Free ^{[6], [4]}		29%
7219.31.00	10	In coils	kg
7219.31.00	50	Not in coils	kg
7219.32.00		Of a thickness of 3 mm or more but less than 4.75 mm		Free ^{[6], [4]}		29%
		In coils:
		Of a width of 1370 mm or more:
7219.32.00	05	Of high-nickel alloy steel	kg
		Other:
7219.32.00	20	Containing more than 0.5 percent by weight of nickel	kg
7219.32.00	25	Other	kg
		Other:
7219.32.00	35	Of high-nickel alloy steel	kg
		Other:
		Containing more than 0.5 percent by weight of nickel:
7219.32.00	36	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7219.32.00	38	Other	kg
		Other:
7219.32.00	42	Containing less than 15 percent by weight of chromium	kg
7219.32.00	44	Other	kg
		Not in coils:
7219.32.00	45	Of a width of 1370 mm or more	kg
7219.32.00	60	Other	kg
7219.33.00		Of a thickness exceeding 1 mm but less than 3 mm		Free ^{[6], [4]}		29%
		In coils:
		Of a width of 1370 mm or more:
7219.33.00	05	Of high-nickel alloy steel	kg
		Other:
7219.33.00	20	Containing more than 0.5 percent by weight of nickel	kg
7219.33.00	25	Other	kg
		Other:
7219.33.00	35	Of high-nickel alloy steel	kg
		Other:
		Containing more than 0.5 percent by weight of nickel:
7219.33.00	36	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7219.33.00	38	Other	kg
		Other:
7219.33.00	42	Containing less than 15 percent by weight of chromium	kg
7219.33.00	44	Other	kg
		Not in coils:
7219.33.00	45	Of a width of 1370 mm or more	kg
		Other:
7219.33.00	70	Containing more than 0.5 percent but less than 24 percent by weight of nickel	kg
7219.33.00	80	Other	kg
7219.34.00		Of a thickness of 0.5 mm or more but not exceeding 1 mm		Free ^{[6], [4]}		29%
		In coils:
7219.34.00	05	Of high-nickel alloy steel	kg
		Other:
		Containing more than 0.5 percent by weight of nickel:
7219.34.00	20	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7219.34.00	25	Other	kg
		Other:
7219.34.00	30	Containing less than 15 percent by weight of chromium	kg
7219.34.00	35	Other	kg
7219.34.00	50	Not in coils	kg
7219.35.00		Of a thickness of less than 0.5 mm		Free ^{[6], [5]}		29%
		In coils:
		Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.35.00	05	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7219.35.00	15	Other	kg
		Other:
7219.35.00	30	Containing less than 15 percent by weight of chromium	kg
7219.35.00	35	Other	kg
7219.35.00	50	Not in coils	kg
7219.90.00		Other		Free ^{[6], [5]}		29%
7219.90.00	10	Of high-nickel alloy steel	kg
		Other:
		Containing more than 0.5 percent by weight of nickel:
7219.90.00	20	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7219.90.00	25	Other	kg
		Other:
7219.90.00	60	Containing less than 15 percent by weight of chromium	kg
7219.90.00	80	Other	kg
7220		Flat-rolled products of stainless steel, of a width of less than 600 mm:
		Not further worked than hot-rolled:
7220.11.00	00	Of a thickness of 4.75 mm or more	kg	Free ^[7]		29%
7220.12		Of a thickness of less than 4.75 mm:
7220.12.10	00	Of a width of 300 mm or more	kg	Free ^{[6], [4]}		29%
7220.12.50	00	Of a width of less than 300 mm	kg	Free ^{[6], [4]}		34%
7220.20		Not further worked than cold-rolled (cold-reduced):
7220.20.10		Of a width of 300 mm or more		Free ^{[6], [4]}		29%
		Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.20.10	10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7220.20.10	15	Other	kg
		Other:
7220.20.10	60	Containing less than 15 percent by weight of chromium	kg
7220.20.10	80	Other	kg
		Of a width of less than 300 mm:
7220.20.60		Of a thickness exceeding 1.25 mm		Free ^{[6], [4]}		34%
7220.20.60	05	Of high-nickel alloy steel	kg
		Other:
		Containing more than 0.5 percent by weight of nickel:
7220.20.60	10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7220.20.60	15	Other	kg
		Other:
7220.20.60	60	Containing less than 15 percent by weight of chromium	kg
7220.20.60	80	Other	kg
7220.20.70		Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm		Free ^{[6], [4]}		34%
7220.20.70	05	Of high-nickel alloy steel	kg
		Other:
		Containing more than 0.5 percent by weight of nickel:
7220.20.70	10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7220.20.70	15	Other	kg
		Other:
7220.20.70	60	Containing less than 15 percent by weight of chromium	kg
7220.20.70	80	Other	kg
		Of a thickness not exceeding 0.25 mm:
7220.20.80	00	Razor blade steel	kg	Free ^{[6], [4]}		34%
7220.20.90		Other		Free ^[7]		34%
7220.20.90	30	Containing more than 0.5 percent but less than 24 percent by weight of nickel	kg
7220.20.90	60	Other	kg
7220.90.00		Other		Free ^{[6], [4]}		46%
		Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.90.00	10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7220.90.00	15	Other	kg
		Other:
7220.90.00	60	Containing less than 15 percent by weight of chromium	kg
7220.90.00	80	Other	kg
7221.00.00		Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel		Free ^{[6], [4]}		11%
7221.00.00	05	Of high-nickel alloy steel	kg
		Other:
		Of circular cross section:
		With a diameter of less than 14 mm:
7221.00.00	17	Containing less than 8 percent by weight of nickel	kg
7221.00.00	18	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
7221.00.00	30	With a diameter of 14 mm or more but less than 19 mm	kg
7221.00.00	45	With a diameter of 19 mm or more	kg
7221.00.00	75	Other	kg
7222		Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
		Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7222.11.00		Of circular cross-section		Free ^{[6], [4]}		29%
7222.11.00	01	Electroslag or vacuum arc remelted	kg
7222.11.00	06	Of high-nickel alloy steel	kg
		Other:
		With a maximum cross-sectional dimension of less than 152.4 mm:
7222.11.00	57	Containing less than 8 percent by weight of nickel	kg
7222.11.00	59	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
		With a maximum cross-sectional dimension of 152.4 mm or more:
7222.11.00	82	Containing less than 8 percent by weight of nickel	kg
7222.11.00	84	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
7222.19.00		Other		Free ^{[6], [4]}		29%
7222.19.00	01	Electroslag or vacuum arc remelted	kg
		Other:
7222.19.00	06	Of high-nickel alloy steel	kg
		Other:
7222.19.00	52	Containing less than 8 percent by weight of nickel	kg
7222.19.00	54	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
7222.20.00		Bars and rods, not further worked than cold-formed or cold-finished		Free ^{[6], [4]}		29%
7222.20.00	01	Electroslag or vacuum arc remelted	kg
7222.20.00	06	Of high-nickel alloy steel	kg
		Other:
		Of a circular cross-section:
		With a maximum circular cross-sectional dimension of less than 18 mm:
7222.20.00	41	Containing less than 8 percent by weight of nickel	kg
7222.20.00	43	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
		With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm:
7222.20.00	62	Containing less than 8 percent by weight of nickel	kg
7222.20.00	64	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
		With a maximum circular cross-sectional dimension of 152.4 mm or more:
7222.20.00	67	Containing less than 8 percent by weight of nickel	kg
7222.20.00	69	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
		Other:
7222.20.00	71	Containing less than 8 percent by weight of nickel	kg
7222.20.00	73	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
7222.30.00		Other bars and rods		Free ^{[6], [4]}		29% ^[2]
7222.30.00	01	Electroslag or vacuum arc remelted	kg
7222.30.00	12	Of high-nickel alloy steel	kg
		Other:
		With a maximum cross-sectional dimension of less than 152.4 mm:
7222.30.00	22	Containing less than 8 percent by weight of nickel	kg
7222.30.00	24	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
		With a maximum cross-sectional dimension of 152.4 mm or more:
7222.30.00	82	Containing less than 8 percent by weight of nickel	kg
7222.30.00	84	Containing 8 percent or more but less than 24 percent by weight of nickel	kg
7222.40		Angles, shapes and sections:
7222.40.30		Hot-rolled, not drilled, not punched and not otherwise advanced		Free ^{[6], [4]}		10%
		With a maximum cross-sectional dimension of 80 mm or more:
7222.40.30	25	Angles	kg
7222.40.30	45	Other	kg
		With a maximum cross-sectional dimension of less than 80 mm:
7222.40.30	65	Angles	kg
7222.40.30	85	Other	kg
7222.40.60	00	Other	kg	Free ^{[6], [4]}		28%
7223.00		Wire of stainless steel:
7223.00.10		Round wire		Free ^{[6], [4]}		34%
7223.00.10	05	Spring round wire of a kind described in statistical note 8 to this chapter	kg
		Other:
7223.00.10	16	With a diameter of less than 0.25 mm	kg
7223.00.10	31	With a diameter of 0.25 mm or more but less than 0.76 mm	kg
7223.00.10	46	With a diameter of 0.76 mm or more but less than 1.52 mm	kg
7223.00.10	61	With a diameter of 1.52 mm or more but less than 5.1 mm	kg
7223.00.10	76	With a diameter of 5.1 mm or more	kg
7223.00.50	00	Flat wire	kg	Free ^{[6], [4]}		34%
7223.00.90	00	Other	kg	Free ^{[6], [4]}		34%
		IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NONALLOY STEEL
7224		Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
7224.10.00		Ingots and other primary forms		Free ^{[6], [4]}		28%
7224.10.00	05	Of high-nickel alloy steel	kg
		Other:
7224.10.00	45	Of tool steel	kg
7224.10.00	75	Other	kg
7224.90.00		Other		Free ^{[6], [4]}		28% ^[2]
7224.90.00	05	Of high-nickel alloy steel	kg
		Other:
		Of tool steel:
		Of rectangular (including square) cross section:
7224.90.00	15	Having a width less than four times the thickness	kg
7224.90.00	25	Having a width at least four times the thickness	kg
7224.90.00	35	Other	kg
		Other:
		Of rectangular (including square) cross section:
7224.90.00	45	Having a width less than four times the thickness	kg
7224.90.00	55	Having a width at least four times the thickness	kg
7224.90.00	65	Of circular cross section	kg
7224.90.00	75	Other	kg
7225		Flat-rolled products of other alloy steel, of a width of 600 mm or more:
		Of silicon electrical steel:
7225.11.00	00	Grain-oriented	kg	Free ^{[6], [4]}		28% ^[2]
7225.19.00	00	Other	kg	Free ^{[6], [4]}		28% ^[2]
7225.30		Other, not further worked than hot-rolled, in coils:
		Of a thickness of 4.75 mm or more:
7225.30.11		Of tool steel		Free ^{[6], [4]}		29%
7225.30.11	10	Of high-speed steel	kg
7225.30.11	80	Other	kg
7225.30.30		Other		Free ^{[6], [4]}		28%
7225.30.30	05	Of high-nickel alloy steel	kg
7225.30.30	50	Other	kg
		Of a thickness of less than 4.75 mm:
7225.30.51		Of tool steel		Free ^{[6], [4]}		29%
7225.30.51	10	Of high-speed steel	kg
7225.30.51	80	Other	kg
7225.30.70	00	Other	kg	Free ^{[6], [4]}		28%
7225.40		Other, not further worked than hot-rolled, not in coils:
		Of a thickness of 4.75 mm or more:
7225.40.11		Of tool steel		Free ^{[6], [4]}		29%
7225.40.11	10	Of high-speed steel	kg
7225.40.11	80	Other	kg
7225.40.30		Other		Free ^{[6], [4]}		28%
7225.40.30	05	Of high-nickel alloy steel	kg
7225.40.30	50	Other	kg
		Of a thickness of less than 4.75 mm:
7225.40.51		Of tool steel		Free ^{[6], [4]}		29%
7225.40.51	10	Of high-speed steel	kg
7225.40.51	30	Of ball-bearing steel	kg
7225.40.51	60	Other	kg
7225.40.70	00	Other	kg	Free ^{[6], [4]}		28%
7225.50		Other, not further worked than cold-rolled (cold-reduced):
7225.50.11		Of tool steel		Free ^{[6], [4]}		29%
7225.50.11	10	Of high-speed steel	kg
7225.50.11	30	Of ball-bearing steel	kg
7225.50.11	60	Other	kg
		Other:
7225.50.60	00	Of a thickness of 4.75 mm or more	kg	Free ^{[6], [5]}		28%
		Of a thickness of less than 4.75 mm:
7225.50.70	00	Heat-resisting steel	kg	Free ^{[6], [4]}		29%
7225.50.80		Other		Free ^{[6], [4]}		28%
7225.50.80	10	Of high-nickel alloy steel	kg
7225.50.80	80	Other	kg
		Other:
7225.91.00	00	Electrolytically plated or coated with zinc	kg	Free ^{[6], [4]}		28%
7225.92.00	00	Otherwise plated or coated with zinc	kg	Free ^{[6], [4]}		28%
7225.99.00		Other		Free ^{[6], [4]}		28%
7225.99.00	10	Of high-nickel alloy steel	kg
7225.99.00	90	Other	kg
7226		Flat-rolled products of other alloy steel, of a width of less than 600 mm:
		Of silicon electrical steel:
7226.11		Grain-oriented:
7226.11.10	00	Of a width of 300 mm or more	kg	Free ^{[6], [4]}		28% ^[2]
7226.11.90		Of a width of less than 300 mm		Free ^{[6], [4]}		33% ^[2]
7226.11.90	30	Of thickness not exceeding 0.25 mm	kg
7226.11.90	60	Other	kg
7226.19		Other:
7226.19.10	00	Of a width of 300 mm or more	kg	Free ^{[6], [4]}		28%
7226.19.90	00	Of a width of less than 300 mm	kg	Free ^{[6], [4]}		33% ^[2]
7226.20.00	00	Of high-speed steel	kg	Free ^{[6], [4]}		37%
		Other:
7226.91		Not further worked than hot-rolled:
		Of tool steel (other than high-speed steel):
7226.91.05	00	Of chipper knife steel	kg	Free ^{[6], [4]}		34%
		Other:
7226.91.15		Of a width of 300 mm or more		Free ^{[6], [4]}		29%
7226.91.15	30	Of ball-bearing steel	kg
7226.91.15	60	Other	kg
7226.91.25		Of a width of less than 300 mm		Free ^{[6], [4]}		34%
7226.91.25	30	Of ball-bearing steel	kg
7226.91.25	60	Other	kg
		Other:
7226.91.50	00	Of a thickness of 4.75 mm or more	kg	Free ^{[6], [4]}		28%
		Of a thickness of less than 4.75 mm:
7226.91.70	00	Of a width of 300 mm or more	kg	Free ^{[6], [4]}		28%
7226.91.80	00	Of a width of less than 300 mm	kg	Free ^{[6], [4]}		33%
7226.92		Not further worked than cold-rolled (cold-reduced):
		Of tool steel (other than high-speed steel):
7226.92.10		Of a width of 300 mm or more		Free ^{[6], [4]}		0.4¢/kg + 29%
7226.92.10	30	Of ball-bearing steel	kg
7226.92.10	60	Other	kg
7226.92.30		Of a width of less than 300 mm		Free ^{[6], [4]}		34%
7226.92.30	30	Of ball-bearing steel	kg
7226.92.30	60	Other	kg
		Other:
7226.92.50	00	Of a width of 300 mm or more	kg	Free ^{[6], [4]}		0.4¢/kg + 28%
		Of a width of less than 300 mm:
7226.92.70		Of a thickness not exceeding 0.25 mm		Free ^{[6], [4]}		33%
7226.92.70	05	Of high-nickel alloy steel	kg
7226.92.70	50	Other	kg
7226.92.80		Of a thickness exceeding 0.25 mm		Free ^{[6], [4]}		33%
7226.92.80	05	Of high-nickel alloy steel	kg
7226.92.80	50	Other	kg
7226.99.01		Other		Free ^{[6], [4]}		33%
7226.99.01	10	Electrolytically plated or coated with zinc	kg
7226.99.01	30	Otherwise plated or coated with zinc	kg
7226.99.01	80	Other	kg
7227		Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
7227.10.00	00	Of high-speed steel	kg	Free ^{[6], [4]}		14%
7227.20.00		Of silico-manganese steel		Free ^{[6], [4]}		10%
7227.20.00	30	Of welding quality wire rods of a kind described in statistical note 7 to this chapter	kg
7227.20.00	80	Other	kg
7227.90		Other:
		Of tool steel (other than high-speed steel):
7227.90.10		Not tempered, not treated, and not partly manufactured		Free ^{[6], [4]}		12%
7227.90.10	30	Of ball-bearing steel	kg
7227.90.10	60	Other	kg
7227.90.20		Other		Free ^{[6], [4]}		11%
7227.90.20	30	Of ball-bearing steel	kg
7227.90.20	60	Other	kg
7227.90.60		Other		Free ^{[6], [4]}		10%
7227.90.60	05	Of high-nickel alloy steel	kg
7227.90.60	10	Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter	kg
7227.90.60	20	Of welding quality wire rods of a kind described in statistical note 7 to this chapter	kg
		Of a circular cross section:
7227.90.60	30	With a diameter of less than 14 mm	kg
7227.90.60	35	With a diameter of 14 mm or more but less than 19 mm	kg
7227.90.60	40	With a diameter of 19 mm or more	kg
7227.90.60	90	Other	kg
7228		Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
7228.10.00		Bars and rods, of high-speed steel		Free ^[7]		32%
7228.10.00	10	Not cold-formed	kg
		Cold-formed:
7228.10.00	30	With a maximum cross-sectional dimension of less than 18 mm	kg
7228.10.00	60	With a maximum cross-sectional dimension of 18 mm or more	kg
7228.20		Bars and rods, of silico-manganese steel:
7228.20.10	00	Not cold-formed	kg	Free ^{[6], [4]}		28%
7228.20.50	00	Cold-formed	kg	Free ^{[6], [4]}		28%
		Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7228.30		Of tool steel (other than high-speed steel):
7228.30.20	00	Of ball-bearing steel	kg	Free ^[7]		29%
7228.30.40	00	Of chipper knife steel, not cold-formed	kg	Free ^{[6], [4]}		28%
7228.30.60	00	Other	kg	Free ^{[6], [4]}		29%
7228.30.80		Other		Free ^{[6], [4]}		28%
7228.30.80	05	Of high-nickel alloy steel	kg
7228.30.80	10	Concrete reinforcing bars and rods	kg
		Other:
7228.30.80	15	With a diameter or cross section measuring less than 76 mm	kg
7228.30.80	41	With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm	kg
7228.30.80	45	With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm	kg
7228.30.80	70	With a diameter or cross section exceeding 228 mm	kg
7228.40.00	00	Other bars and rods, not further worked than forged	kg	Free ^{[6], [4]}		28% ^[2]
7228.50		Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10		Of tool steel (other than high-speed steel)		Free ^{[6], [4]}		29% ^[2]
7228.50.10	10	Of ball-bearing steel	kg
		Other:
		With a maximum cross-sectional dimension of less than 18 mm:
7228.50.10	20	Of round or rectangular cross section with surfaces ground, milled or polished	kg
7228.50.10	40	Other	kg
		With a maximum cross-sectional dimension of 18 mm or more:
7228.50.10	60	Of round or rectangular cross section with surfaces ground, milled or polished	kg
7228.50.10	80	Other	kg
7228.50.50		Other		Free ^{[6], [4]}		28% ^[2]
7228.50.50	05	Of high-nickel alloy steel	kg
		Other:
7228.50.50	15	With a diameter or cross section measuring less than 76 mm	kg
7228.50.50	40	With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm	kg
7228.50.50	70	With a diameter or cross section exceeding 228 mm	kg
7228.60		Other bars and rods:
7228.60.10		Of tool steel (other than high-speed steel)		Free ^{[6], [4]}		29%
7228.60.10	30	Of ball-bearing steel	kg
7228.60.10	60	Other	kg
		Other:
7228.60.60	00	Not cold-formed	kg	Free ^{[6], [4]}		28%
7228.60.80	00	Cold-formed	kg	Free ^{[6], [4]}		28% ^[2]
7228.70		Angles, shapes and sections:
7228.70.30		Hot-rolled, not drilled, not punched and not otherwise advanced		Free ^{[6], [4]}		10%
7228.70.30	10	U, I, H and T sections	kg
		Other:
		With a maximum cross-sectional dimension of 76 mm or more:
7228.70.30	20	Angles	kg
7228.70.30	41	Other	kg
		With a maximum cross-sectional dimension of less than 76 mm:
7228.70.30	60	Angles	kg
7228.70.30	81	Other	kg
7228.70.60	00	Other	kg	Free ^{[6], [4]}		28%
7228.80.00	00	Hollow drill bars and rods	kg	Free ^[7]		30%
7229		Wire of other alloy steel:
7229.20.00		Of silico-manganese steel		Free ^{[6], [4]}		33%
		Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding:
7229.20.00	10	Plated or coated with copper	kg
7229.20.00	15	Other	kg
7229.20.00	90	Other	kg
7229.90		Other:
7229.90.05	00	Of high-speed steel	kg	Free ^[7]		37%
		Other:
7229.90.10	00	Flat wire	kg	Free ^{[6], [4]}		33%
7229.90.50		Round wire		Free ^{[6], [4]}		33%
		With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding:
7229.90.50	06	Plated or coated with copper	kg
7229.90.50	08	Other	kg
		Other:
7229.90.50	16	With a diameter of less than 1.0 mm	kg
7229.90.50	31	With a diameter of 1.0 mm or more but less than 1.5 mm	kg
7229.90.50	51	With a diameter of 1.5 mm or more	kg
7229.90.90	00	Other wire	kg	Free ^{[6], [4]}		33%

Footnotes
[1] See 9903.88.03.
[2] See 9903.90.09.
[3] See 9903.88.03.
[4] See 9903.91.01.
[5] See 9903.91.01.
[6] See note 16 to subchapter III, chapter 99 and related tariff provisions for this duty treatment.
[7] See 9903.88.15. Also see note 16 to subchapter III, chapter 99 and related tariff provisions for this duty treatment.