19 CFR 181.42 - Duties and fees not subject to drawback.

This subpart sets forth the provisions regarding drawback claims and duty-deferral programs under Article 303 of the NAFTA and applies to any good that is a “good subject to NAFTA drawback” within the meaning of 19 U.S.C. 3333. Except in the case of § 181.42(d), the provisions of this subpart apply to goods which are imported into the United States and then subsequently exported from the United States to Canada on or after January 1, 1996, or to Mexico on or after January 1, 2001. The requirements and procedures set forth in this subpart for NAFTA drawback are in addition to the general definitions, requirements and procedures for all drawback claims set forth in part 191 of this chapter, unless otherwise specifically provided in this subpart. Also, the requirements and procedures set forth in this subpart for NAFTA duty-deferral programs are in addition to the requirements and procedures for manipulation, manufacturing and smelting and refining warehouses contained in part 19 and part 144 of this chapter, for foreign trade zones under part 146 of this chapter, and for temporary importations under bond contained in part 10 of this chapter.

§ 181.42 - Duties and fees not subject to drawback.

The following duties or fees which may be applicable to a good entered for consumption in the Customs territory of the United States are not subject to drawback under this subpart:

(a) Antidumping and countervailing duties;

(b) A premium offered or collected on a good with respect to quantitative import restrictions, tariff rate quotas or tariff preference levels;

(d) Customs duties paid or owed under unused merchandise substitution drawback. There shall be no payment of such drawback under 19 U.S.C. 1313(j)(2) on goods exported to Canada or Mexico on or after January 1, 1994.

§ 181.43 - Eligible goods subject to drawback.

Except as otherwise provided in this subpart, drawback is authorized for an imported good that is entered for consumption and is:

(a) Subsequently exported to Canada or Mexico (see 19 U.S.C. 1313(j)(1));

(b) Used as a material in the production of another good that is subsequently exported to Canada or Mexico (see 19 U.S.C. 1313(a)); or

(c) Substituted by a good of the same kind and quality as defined in § 181.44(c) of this subpart and used as a material in the production of another good that is subsequently exported to Canada or Mexico (see 19 U.S.C. 1313(b)).

§ 181.44 - Calculation of drawback.

(a) General. Except in the case of goods specified in § 181.45 of this part, drawback of the duties previously paid upon importation of a good into the United States may be granted by the United States, upon presentation of a NAFTA drawback claim under this subpart, on the lower amount of:

(1) The total duties paid or owed on the good in the United States; or

(2) The total amount of duties paid on the exported good upon subsequent importation into Canada or Mexico.

(b) Individual relative value and duty comparison principle. For purposes of this section, relative value shall be determined, and the comparison between the duties referred to in paragraph (a)(1) of this section and the duties referred to in paragraph (a)(2) of this section shall be made, separately with reference to each individual exported good, including where two components or materials are used to produce one exported good or one component or material is divided among multiple exported goods.

Example.Upon importation of Chemical X into the United States, Company A entered Chemical X and paid $2.00 in duties. Company A processed Chemical X into Products Y and Z, each having the same relative value; that is, $1.00 in duty is attributable to Product Y and $1.00 in duty is attributable to Product Z. Company A exported Product Y to Canada and Canada assessed a free rate of duty. Company A exported Product Z to Mexico and Mexico assessed the equivalent of US$2.00 in duty. There is no entitlement to drawback on the export of Product Y to Canada because zero is the lesser amount when compared to the $1.00 in duty attributable to Product Y as a result of the separation of Chemical X into Products Y and Z. There would be entitlement to drawback on the export to Mexico, consisting of the $1.00 duty attributable to Product Z, because that amount is the lesser amount when comparing the duty paid to the United States and the US$ equivalent duty paid to Mexico.

(c) Direct identification manufacturing drawback under 19 U.S.C. 1313(a). Upon presentation of the NAFTA drawback claim under 19 U.S.C. 1313(a), in which the amount of drawback payable is based on the lesser amount of the customs duties paid on the good either to the United States or to Canada or Mexico, the amount of drawback refunded shall not exceed 99 percent of the duty paid on such imported merchandise into the United States.

Example 1.Upon the importation of Product X to the United States from Japan, Company A paid $2.00 in duties. Company A manufactured the imported Product X into Product Y, and subsequently exported it to Mexico. Mexico assessed the equivalent of US$11.00 in duties upon importation of Product Y. Upon presenting a drawback claim in the United States, in accordance with 19 U.S.C. 1313(a), Company A would be entitled to a refund of 99 percent of the $2.00, or $1.98. The $2.00 paid by Company A (less 1 percent) on the importation of Product X into the United States is a lesser amount of duties than the total amount of customs duties paid to Mexico (the equivalent of US$11.00) on Product Y. Example 2.Upon the importation of Product X into the United States from Hong Kong, Company A entered Product X and paid $5.00 in duties. Company A manufactured Product X into Product Y, sold it to Company B in Mexico and subsequently exported it to Mexico. Company A reserved its right to drawback. Upon Product Y's importation, Company B was assessed a free rate of duty. Company A's claim for drawback will be denied because Company A is entitled to zero drawback for the reason that, as between the duty paid in the United States and the duty paid in Mexico, the duty in Mexico was zero.

(d) Substitution manufacturing drawback under 19 U.S.C. 1313(b). Upon presentation of a NAFTA drawback claim under 19 U.S.C. 1313(b), on which the amount of drawback payable is based on the lesser amount of the customs duties paid on the good either to the United States or to Canada or Mexico, the amount of drawback is the same as that which would have been allowed had the substituted merchandise used in manufacture been itself imported. For purposes of drawback under this subpart, the term “same kind and quality” used in § 1313(b) (see § 191.2(x)(1) of this chapter) shall have the same meaning as the term “identical or similar good” used in Article 303 of the NAFTA except that there shall be no requirement that the good be manufactured in the same country.

Example 1.Upon importation of Product X from Japan to the United States, Company A paid $5.00 in duties. Company A substituted a same kind and quality domestic Product X for the Japanese Product X in its production of Product Y under its 19 U.S.C. 1313(b) drawback contract. Company A sold Product Y to Company B which subsequently exported it to Canada. On the importation of Product Y by Company B, Company B paid the equivalent of US$2.00 in duties assessed by Revenue Canada and waived its right to drawback to Company A. Company A is entitled to obtain drawback under 19 U.S.C. 1313(b) in the United States in the amount of $1.98 (or 99 percent of the US$2.00 equivalent Company B paid in duty to Canada) since that $2.00 was the lesser of the total amount of customs duties paid on the product to either Canada or the United States. Example 2.Same facts as above example, but Company B paid the equivalent of US$5.00 to Revenue Canada. Company A is entitled to obtain $4.95 in drawback (a refund of 99 percent of $5.00 paid to the United States). Since the same amount of duty was assessed by each country, drawback is allowable because the drawback paid does not exceed the lesser amount paid.

(e) Meats cured with imported salt. Meats, whether packed or smoked, which have been cured with imported salt may be eligible for drawback in aggregate amounts of not less than $100 in duties paid on the imported salt upon exportation of the meats to Canada or Mexico (see 19 U.S.C. 1313(f)).

Example.Company Z produced Virginia smoked ham on its Smithfield, Virginia farm, using 4,000 pounds of imported salt in curing the meat. The salt was imported from an HTSUS Column 2 country, with a duty of $200. Upon exportation of the hams to Mexico, Company Z pays the equivalent of US$250.00 in duties to Mexico. Company Z is entitled to drawback of the full 100 percent of the $200.00 in duties it paid on the importation of the salt into the United States because that $200.00 is a lesser amount than the total amount of customs duties paid to Mexico on the exported meat.

(f) Jet aircraft engines. A foreign-built jet aircraft engine that has been overhauled, repaired, rebuilt, or reconditioned in the United States with the use of imported merchandise, including parts, may be eligible for drawback of duties paid on the imported merchandise in aggregate amounts of not less than $100 upon exportation of the engine to Canada or Mexico (19 U.S.C. 1313(h)).

Example.A Swedish-made jet aircraft engine is repaired in the United States using imported parts from Korea on which $160.00 in duties have been paid by Company W. The engine is subsequently exported to Canada by Company W and Company W pays the equivalent of US$260.00 in duties to Canada. Upon showing the country in which the engine was manufactured and a description of the processing performed thereon in the United States on Customs Form 7551, appropriately modified, Company W is entitled to the full refund of the duties paid to the United States since that $160.00 was a lesser amount than the duties paid on the engine to Canada.

(g) Unused goods under 19 U.S.C. 1313(j)(1) that have changed in condition. An imported good that is unused in the United States under 19 U.S.C. 1313(j)(1) and that is shipped to Canada or Mexico not in the same condition within the meaning of § 181.45(b)(1) may be eligible for drawback under this section, except when the shipment to Canada or Mexico does not constitute an exportation under 19 U.S.C. 1313(j)(4).

Example.Upon importation of Product X from Spain to the United States, the U.S. importer pays $10.00 in duties. While in the original package in the importer's warehouse, Product X becomes damaged. A Canadian purchaser buys Product X and imports it into Canada and pays the equivalent of US$5.00 in duties assessed by Revenue Canada. The Canadian purchaser who exported Product X from the United States to Canada and who otherwise qualifies for drawback is entitled to drawback under 19 U.S.C. 1313(j)(1) in the amount of $4.95 (99 percent of the US$5.00 equivalent in duties paid to Canada). Eligibility for full drawback of the $10.00 in U.S. duties under § 181.45(b) would be precluded because Product X, although unused, was not exported to Canada in the same condition as when imported into the United States within the meaning of § 181.45(b)(1). [T.D. 95-68, 60 FR 46364, Sept. 6, 1995, as amended by T.D. 98-16, 63 FR 11005, Mar. 5, 1998]

§ 181.45 - Goods eligible for full drawback.

(a) Goods originating in Canada or Mexico. A Canadian or Mexican originating good that is dutiable and is imported into the United States is eligible for drawback without regard to the limitation on drawback set forth in § 181.44 of this part if that originating good is:

(1) Subsequently exported to Canada or Mexico;

(2) Used as a material in the production of another good that is subsequently exported to Canada or Mexico; or

(3) Substituted by a good of the same kind and quality and used as a material in the production of another good that is subsequently exported to Canada or Mexico.

Example.Company A imports a dutiable (3 percent rate) Canadian originating good. During Company A's manufacturing process, Company A substitutes a German good of the same kind and quality (on which duty was paid at a 2.5 percent rate) in the production of another good that is subsequently exported to Canada. Company A may designate the dutiable Canadian entry and claim full drawback (99 percent) on the 3 percent duty paid under 19 U.S.C. 1313(b). (Note: NAFTA originating goods will continue to receive full drawback as they cross NAFTA borders for successive stages of production until NAFTA tariffs are fully phased out.)

(b) Claims under 19 U.S.C 1313(j)(1) for goods in same condition. A good imported into the United States and subsequently exported to Canada or Mexico in the same condition is eligible for drawback under 19 U.S.C. 1313(j)(1) without regard to the limitation on drawback set forth in § 181.44 of this part.

Example.X imports a desk into the United States from England and pays $25.00 in duty. X immediately exports the desk to Z in Mexico and Z pays the equivalent of US$10.00 in Mexican duties. X can obtain a refund of 99 percent of the $25.00 paid upon importation of the desk into the United States.

(1) Same condition defined. For purposes of this subpart, a reference to a good in the “same condition” includes a good that has been subjected to any of the following operations provided that no such operation materially alters the characteristics of the good:

(i) Mere dilution with water or another substance;

(ii) Cleaning, including removal of rust, grease, paint or other coatings;

(iii) Application of preservative, including lubricants, protective encapsulation, or preservation paint;

(iv) Trimming, filing, slitting or cutting;

(v) Putting up in measured doses, or packing, repacking, packaging or repackaging; or

(vi) Testing, marking, labelling, sorting or grading.

(2) Commingling of fungible goods—(i) General—(A) Inventory of other than all non-originating goods. Commingling of fungible originating and non-originating goods in inventory is permissable provided that the origin of the goods and the identification of entries for designation for same condition drawback are on the basis of an approved inventory method set forth in the appendix to this part.

(B) Inventory of the non-originating goods. If all goods in a particular inventory are non-originating goods, identification of entries for designation for same condition drawback shall be on the basis of one of the accounting methods in § 190.14 or § 191.14 of this chapter, as appropriate.

(ii) Exception. Agricultural goods imported from Mexico may not be commingled with fungible agricultural goods in the United States for purposes of same condition drawback under this subpart.

(c) Goods not conforming to sample or specifications or shipped without consent of consignee under 19 U.S.C. 1313(c). An imported good exported to Canada or Mexico by reason of failure of the good to conform to sample or specification or by reason of shipment of the good without the consent of the consignee is eligible for drawback under 19 U.S.C. 1313(c) without regard to the limitation on drawback set forth in § 181.44 of this part. Such a good must be exported or destroyed within the statutory 5-year time period and in compliance with the requirements set forth in subpart D of part 190 of this chapter or within the 3-year time period and in compliance with the requirements set forth in subpart D of part 191 of this chapter, as applicable.

Example.X orders, after seeing a sample in the ABC Company's catalog, a certain quantity of 2-by-4 lumber from ABC Company located in Honduras. ABC Company, having run out of the specific lumber, ships instead a different kind of lumber. X rejects the lumber because it did not conform to the sample and is asked to send it to a customer of ABC in Canada. X exports it within 90 days of its release from Customs custody. X may recover 99 percent of the $500 duties it paid to U.S. Customs upon the exportation of the lumber, or $495.00.

(d) Certain goods exported to Canada. Goods identified in Annex 303.6 of the NAFTA and in sections 203(a) (7) and (8) of the North American Free Trade Agreement Implementation Act, if exported to Canada, are eligible for drawback without regard to the limitation on drawback set forth in § 181.44 of this part.

[T.D. 95-68, 60 FR 46364, Sept. 6, 1995, as amended by T.D. 98-16, 63 FR 11005, Mar. 5, 1998; USCBP-2018-0029, 83 FR 64996, Dec. 18, 2018]

§ 181.46 - Time and place for filing drawback claim.

(a) Time of filing. A drawback claim under this subpart shall be filed or applied for, as applicable, within 3 years after the date of exportation of the goods on which drawback is claimed. No extension will be granted unless it is established that a Customs officer was responsible for the untimely filing. Drawback shall be allowed only if the completed good is exported within 5 years after importation of the merchandise identified or designated to support the claim. A good subject to a claim for same condition drawback must be exported before the close of the 3-year period beginning on the date of importation of the good into the United States.

(b) Place of filing. A drawback claim must be filed at the drawback office(s) where the manufacturing drawback contract is on file, whether a general rate or specific rate, but exportation need not occur from that port. To facilitate expedited processing of claims, claimants should file same condition drawback claims in the port where the examination would take place (see § 190.35 or § 191.35 of this chapter, as appropriate). Customs must be notified at least 2 working days in advance of the intended date of exportation in order to have the opportunity to examine the goods.

[T.D. 95-68, 60 FR 46364, Sept. 6, 1995, as amended by T.D. 98-16, 63 FR 11005, Mar. 5, 1998; USCBP-2018-0029, 83 FR 64996, Dec. 18, 2018]

§ 181.47 - Completion of claim for drawback.

(a) General. A claim for drawback will be granted, upon the submission of appropriate documentation to substantiate compliance with the drawback laws and regulations of the United States, evidence of exportation to Canada or Mexico, and satisfactory evidence of the payment of duties to Canada or Mexico. Unless otherwise provided in this subpart, the documentation, filing procedures, time and place requirements and other applicable procedures required to determine whether a good qualifies for drawback must be in accordance with the provisions of part 190 or 191 of this chapter, as appropriate; however, a drawback claim subject to the provisions of this subpart must be filed separately from any part 191 drawback claim (that is, a claim that involves goods exported to countries other than Canada or Mexico). Claims inappropriately filed or otherwise not completed within the 3-year period specified in § 181.46 of this part will be considered abandoned.

(b) Complete drawback claim—(1) General. A complete drawback claim under this subpart must consist of the filing of the appropriate completed drawback entry form, evidence of exportation (a copy of the Canadian or Mexican customs entry showing the amount of duty paid to Canada or Mexico) and its supporting documents, certificate(s) of delivery, when necessary, or certificate(s) of manufacture and delivery, and a certification from the Canadian or Mexican importer as to the amount of duties paid. Each drawback entry form filed under this subpart must be conspicuously marked at the top with the word “NAFTA”.

(2) Specific claims. The following documentation, for the drawback claims specified below, must be submitted to CBP in order for a drawback claim to be processed under this subpart. Missing documentation or incorrect or incomplete information on required customs forms or supporting documentation will result in an incomplete drawback claim.

(i) Manufacturing drawback claim. The following must be submitted in connection with a claim for direct identification manufacturing drawback or substitution manufacturing drawback:

(A) A completed CBP Form 331, to establish the manufacture of goods made with imported merchandise and, if applicable, the identity of substituted domestic, duty-paid or duty-free merchandise, and including the tariff classification number of the imported merchandise;

(B) CBP Form 7501, or its electronic equivalent, or the import entry number;

(C) Exporter summary procedure, if applicable. For purposes of this subpart, the exporter summary procedure must include the Canadian or Mexican customs entry number and the amount of duty paid to Canada or Mexico;

(D) Evidence of exportation and satisfactory evidence of the payment of duties in Canada or Mexico, as provided in paragraph (c) of this section;

(E) Waiver of right to drawback. If the person exporting to Canada or Mexico was not the importer or the manufacturer, written waivers executed by the importer or manufacturer and by any intervening person to whom the good was transferred must be submitted in order for the claim to be considered complete; and

(F) An affidavit of the party claiming drawback stating that no other drawback claim has been made on the designated goods, that such party has not provided an exporter's Certificate of Origin pertaining to the exported goods to another party except as stated on the drawback claim, and that the party agrees to notify CBP if he subsequently provides such an exporter's Certificate of Origin to any person.

(ii) Same condition drawback claim under 19 U.S.C. 1313(j)(1). The following must be submitted in connection with a drawback claim covering a good in the same condition:

(A) A completed CBP Form 7551. In addition, the tariff classification number of the imported goods must be recorded on the form;

(B) CBP Form 7501, or its electronic equivalent. The form must show the entry number, date of entry, port of importation, date of importation, importing carrier, and importer of record or ultimate consignee name and the CBP-assigned or taxpayer identification number. Explicit line item information must be clearly noted on the CBP Form 7501 so that the subject goods are easily discernible;

(D) A certificate of delivery on CBP Form 7552, or its electronic equivalent, if applicable, for purposes of tracing the transfer of ownership of the imported goods from the importer to the claimant. This is required if the drawback claimant is not the original importer of the merchandise which is the subject of a same condition claim;

(E) In-bond application submitted pursuant to part 18 of this chapter, if applicable. This is required for merchandise which is examined at one port but exported through border points outside of that port. Such goods must travel in bond from the location where they were examined to the point of the border crossing (exportation). If examination is waived, in-bond transportation is not required;

(F) Notification of intent to export or waiver of prior notice;

(G) Evidence of exportation. Acceptable documentary evidence of exportation of goods to Canada or Mexico may include originals or copies of any of the following documents that are issued by the exporting carrier: bill of lading, air waybill, freight waybill, export ocean bill of lading, Canadian customs manifest, and cargo manifest. Supporting documentary evidence must establish fully the time and fact of exportation, the identity of the exporter, and the identity and location of the ultimate consignee of the exported goods;

(H) Waiver of right to drawback. If the party exporting to Canada or Mexico was not the importer, a written waiver from the importer and from each intermediate person to whom the goods were transferred is required in order for the claim to be considered complete; and

(I) An affidavit of the party claiming drawback stating that no other drawback claim has been made on the designated goods.

(iii) Nonconforming or improperly shipped goods drawback claim. The following must be submitted in the case of goods not conforming to sample or specifications or shipped without the consent of the consignee and subject to a drawback claim under 19 U.S.C. 1313(c):

(A) CBP Form 7551, completed and submitted at the time the goods are returned to CBP custody;

(B) CBP Form 7501, or its electronic equivalent to establish the fact of importation, the receipt of the imported goods and the identity of the party to whom drawback is payable (see § 181.48(c) of this part);

(C) Documentary evidence to support the claim that the goods did not conform to sample or specifications or were shipped without the consent of the consignee. In the case of nonconforming goods, such documentation may include a copy of a purchase order and any related documents such as a specification sheet, catalogue or advertising brochure from the supplier, the basis for which the order was placed, and copy of a letter or telex or credit memo from the supplier indicating acceptance of the returned merchandise. This documentation is necessary to establish that the goods are, in fact, being returned to the party from which they were procured or that they are being sent to the supplier's other customer directly;

(D) CBP Form 7512, if applicable; and

(E) Evidence of exportation, as provided in paragraph (b)(2)(ii)(G) of this section.

(iv) Meats cured with imported salt. The provisions of paragraph (b)(2)(i) of this section relating to direct identification manufacturing drawback will apply to claims for drawback on meats cured with imported salt filed under this subpart insofar as applicable to and not inconsistent with the provisions of this subpart, and the forms referred to in that paragraph must be modified to show that the claim is being made for refund of duties paid on salt used in curing meats.

(v) Jet aircraft engines. The provisions of paragraph (b)(2)(i) of this section relating to direct identification manufacturing drawback will apply to claims for drawback on foreign-built jet aircraft engines repaired or reconditioned in the United States filed under this subpart insofar as applicable to and not inconsistent with the provisions of this subpart and the provisions of subpart N of part 191 of this chapter.

(c) Evidence of exportation and of duties paid in Canada or Mexico. For purposes of this subpart, evidence of exportation and satisfactory evidence of payment of duties in Canada or Mexico must consist of one of the following types of documentation, provided that, for purposes of evidence of duties paid, such documentation includes the import entry number, the date of importation, the tariff classification number, the rate of duty and the amount of duties paid:

(1) In the case of Canada, the Canadian entry document, referred to as the Canada Customs Invoice or B-3, presented with either the K-84 Statement or the Detailed Coding Statement. A Canadian customs document that is not accompanied by a valid receipt is not adequate evidence of exportation and payment of duty in Canada;

(2) In the case of Mexico, the Mexican entry document (the “pedimento”);

(3) The final customs duty determination of Canada or Mexico, or a copy thereof, respecting the relevant entry; or

(4) An affidavit, from the person claiming drawback, which is based on information received from the importer of the good in Canada or Mexico.

[T.D. 95-68, 60 FR 46364, Sept. 6, 1995, as amended by T.D. 98-16, 63 FR 11005, Mar. 5, 1998; CBP Dec. 15-11, 80 FR 47407, Aug. 7, 2015; CBP Dec. 15-14, 80 FR 61292, Oct. 13, 2015; CBP Dec. 17-13, 82 FR 45407, Sept. 28, 2017; USCBP-2018-0029, 83 FR 64996, Dec. 18, 2018]

§ 181.48 - Person entitled to receive drawback.

(a) Manufacturing drawback. The person named as exporter on the notice of exportation or on the bill of lading, air waybill, freight waybill, Canadian or Mexican customs manifest, cargo manifest, or certified copies of these documents, shall be considered the exporter and entitled to manufacturing drawback, unless the manufacturer or producer shall reserve the right to claim drawback. The manufacturer or producer who reserves this right may claim drawback, and he shall receive payment upon production of satisfactory evidence that the reservation was made with the knowledge and consent of the exporter. Drawback also may be granted to the agent of the manufacturer, producer, or exporter, or to the person the manufacturer, producer, exporter, or agent directs in writing to receive the drawback of duties.

(b) Nonconforming or improperly shipped goods drawback. Only the importer of record or the actual owner of the merchandise or its agent may claim drawback under 19 U.S.C. 1313(c).

(c) Same condition drawback. The importer of record on the consumption entry is entitled to claim same condition drawback under 19 U.S.C. 1313(j)(1) unless he has in writing waived his right to claim drawback.

§ 181.49 - Retention of records.

All records required to be kept by the exporter, importer, manufacturer or producer under this subpart with respect to manufacturing drawback claims, and all records kept by others which complement the records of the importer, exporter, manufacturer or producer (see § 190.15 (see also §§ 190.26(f), 190.38, 190.175(c)) or § 191.15 (see also §§ 190.26(f), 191.38, 191.175(c)) of this chapter, as appropriate) shall be retained for at least three years after payment of such claims. However, any person who issues a drawback certificate that enables another person to make or perfect a drawback claim shall keep records in support of that certificate commencing on the date that the certificate is issued and shall retain those records for three years following the date of payment of the claim.

[T.D. 95-68, 60 FR 46364, Sept. 6, 1995, as amended by T.D. 98-16, 63 FR 11006, Mar. 5, 1998; USCBP-2018-0029, 83 FR 64996, Dec. 18, 2018]

§ 181.50 -

(a) General. When the drawback claim has been fully completed by the filing of all required documents, and exportation of the articles has been established and the amount of duties paid to Canada or Mexico has been established, the entry will be liquidated to determine the proper amount of drawback due either in accordance with the limitation on drawback set forth in § 181.44 of this part or in accordance with the regular drawback calculation. The liquidation procedures of subpart H of part 190 or subpart H of part 191 of this chapter, as appropriate shall control for purposes of this subpart.

(b) Time for liquidation. A drawback claim shall not be liquidated until either a written waiver of the right to protest under 19 U.S.C. 1514 is filed with Customs or the liquidation of the import entry has become final under U.S. law. In addition, except in the case of goods covered by § 181.45 of this part, a drawback claim shall not be liquidated for a period of 3 years after the date of entry of the goods in Canada or Mexico. A drawback claim may be adjusted pursuant to 19 U.S.C. 1508(b)(2)(B)(iii) even after liquidation of the U.S. import entry has become final.

(c) Accelerated payment. Accelerated drawback payment procedures shall apply as set forth in § 190.92 or § 191.92 of this chapter, as appropriate. However, a person who receives drawback of duties under this procedure shall repay the duties paid if a NAFTA drawback claim is adversely affected thereafter by administrative or court action.

[T.D. 95-68, 60 FR 46364, Sept. 6, 1995, as amended by T.D. 98-16, 63 FR 11006, Mar. 5, 1998; USCBP-2018-0029, 83 FR 64996, Dec. 18, 2018]

§ 181.51 - Prevention of improper payment of claims.

(a) Double payment of claim. The drawback claimant shall certify to Customs that he has not earlier received payment on the same import entry for the same designation of goods. If, notwithstanding such a certification, such an earlier payment was in fact made to the claimant, the claimant shall repay any amount paid on the second claim.

(b) Preparation of Certificate of Origin. The drawback claimant shall, within 30 calendar days after the filing of the drawback claim under this subpart, submit to Customs a written statement as to whether he has prepared, or has knowledge that another person has prepared, a Certificate of Origin provided for under § 181.11(a) of this part and pertaining to the goods which are covered by the claim. If, following such 30-day period, the claimant prepares, or otherwise learns of the existence of, any such Certificate of Origin, the claimant shall, within 30 calendar days thereafter, disclose that fact to Customs.

§ 181.52 - Subsequent claims for preferential tariff treatment.

If a claim for a refund of duties is allowed by the Canadian or Mexican customs administration under Article 502(3) of the NAFTA (post-importation claim) or under any other circumstance after drawback has been granted under this subpart, the appropriate Customs officer shall reliquidate the drawback claim and obtain a refund of the amount paid in drawback in excess of the amount permitted to be paid under § 181.44 of this part.

§ 181.53 - Collection and waiver or reduction of duty under duty-deferral programs.

(a) General—(1) Definitions. The following definitions shall apply for purposes of this section:

(i) Date of exportation. “Date of exportation” means the date of importation into Canada or Mexico as reflected on the applicable Canadian or Mexican entry document (see § 181.47(c) (1) and (2)).

(ii) Duty-deferral program. A “duty-deferral program” means any measure which postpones duty payment upon arrival of a good in the United States until withdrawn or removed for exportation to Canada or Mexico or for entry into a Canadian or Mexican duty-deferral program. Such measures govern manipulation warehouses, manufacturing warehouses, smelting and refining warehouses, foreign trade zones, and those temporary importations under bond that are specified in paragraph (b)(5) of this section.

(2) Treatment as entered or withdrawn for consumption—(i) General. (A) Where a good is imported into the United States pursuant to a duty-deferral program and is subsequently withdrawn from the duty-deferral program for exportation to Canada or Mexico or is used as a material in the production of another good that is subsequently withdrawn from the duty-deferral program for exportation to Canada or Mexico, and provided that the good is a “good subject to NAFTA drawback” within the meaning of 19 U.S.C. 3333 and is not described in § 181.45 of this part, the documentation required to be filed under this section in connection with the exportation of the good shall, for purposes of this chapter, constitute an entry or withdrawal for consumption and the exported good shall be subject to duty which shall be assessed in accordance with paragraph (b) of this section.

(B) Where a good is imported into the United States pursuant to a duty-deferral program and is subsequently withdrawn from the duty-deferral program and entered into a duty-deferral program in Canada or Mexico or is used as a material in the production of another good that is subsequently withdrawn from the duty-deferral program and entered into a duty-deferral program in Canada or Mexico, and provided that the good is a “good subject to NAFTA drawback” within the meaning of 19 U.S.C. 3333 and is not described in § 181.45, the documentation required to be filed under this section in connection with the withdrawal of the good from the U.S. duty-deferral program shall, for purposes of this chapter, constitute an entry or withdrawal for consumption and the withdrawn good shall be subject to duty which shall be assessed in accordance with paragraph (b) of this section.

(C) Any assessment of duty under this section shall include the duties and fees referred to in § 181.42 (a) through (c) and the fees provided for in § 24.23 of this chapter; these inclusions shall not be subject to refund, waiver, reduction or drawback.

(ii) Bond requirements. The provisions of § 142.4 of this chapter shall apply to each withdrawal and exportation transaction described in paragraph (a)(2)(i) of this section. However, in applying the provisions of § 142.4 of this chapter in the context of this section, any reference to release from Customs custody in § 142.4 of this chapter shall be taken to mean exportation to Canada or Mexico.

(iii) Documentation filing and duty payment procedures—(A) Persons required to file. In the circumstances described in paragraph (a)(2)(i) of this section, the documentation described in paragraph (a)(2)(iii)(B) of this section must be filed by one of the following persons:

(1) In the case of a withdrawal of the goods from a warehouse, the person who has the right to withdraw the goods;

(2) In the case of a temporary importation under bond (TIB) specified in paragraph (b)(5) of this section, the TIB importer whether or not he sells the goods for export to Canada or Mexico unless § 10.31(h) of this chapter applies; or

(3) In the case of a withdrawal from a foreign trade zone, the person who has the right to make entry. However, if a zone operator is not the person with the right to make entry of the good, the zone operator shall be responsible for the payment of any duty due in the event the zone operator permits such other person to remove the goods from the zone and such other person fails to comply with §§ 146.67 and 146.68 of this chapter.

(B) Documentation required to be filed and required filing date. The person required to file shall file Customs Form 7501, or its electronic equivalent, no later than 10 working days after the date of exportation to Canada or Mexico or 10 working days after being entered into a duty-deferral program in Canada or Mexico. Except where the context otherwise requires and except as otherwise specifically provided in this paragraph, the procedures for completing and filing Customs Form 7501 in connection with the entry of merchandise under this chapter shall apply for purposes of this paragraph. For purposes of completing Customs Form 7501 under this paragraph, any reference on the form to the entry date shall be taken to refer to the date of exportation of the good or the date the goods are entered into a duty-deferral program in Canada or Mexico. The Customs Form 7501 required under this paragraph may be transmitted electronically.

(C) Duty payment. The duty estimated to be due under paragraph (b) of this section shall be deposited with Customs 60 calendar days after the date of exportation of the good. If a good is entered into a duty-deferral program in Canada or Mexico, the duty estimated to be due under paragraph (b) of this section, but without any waiver or reduction provided for in that paragraph, shall be deposited with Customs 60 calendar days after the date the good is entered into such duty-deferral program. Nothing shall preclude the deposit of such estimated duty at the time of filing the Customs Form 7501, or its electronic equivalent, under paragraph (a)(2)(iii)(B) of this section or at any other time within the 60-day period prescribed in this paragraph. However, any interest calculation shall run from the date the duties are required to be deposited.

(3) Waiver or reduction of duties—(i) General. Except in the case of duties and fees referred to in §§ 181.42(a) through (c) and fees provided for in § 24.23 of this chapter, Customs shall waive or reduce the duties paid or owed under paragraph (a)(2) of this section by the person who is required to file the Customs Form 7501, or its electronic equivalent, (see paragraph (a)(2)(iii)(A) of this section) in accordance with paragraph (b) of this section, provided that a claim for waiver or reduction of the duties is filed with Customs within the appropriate 60-day time frame. The claim shall be based on evidence of exportation or entry into a Canadian or Mexican duty-deferral program and satisfactory evidence of duties paid in Canada or Mexico (see § 181.47(c)).

(ii) Filing of claim and payment of reduced duties. A claim for a waiver or reduction of duties under paragraph (a)(3)(i) of this section shall be made on Customs Form 7501, or its electronic equivalent, which shall set forth, in addition to the information required under paragraph (a)(2)(iii)(B) of this section, a description of the good exported to Canada or Mexico and the Canadian or Mexican import entry number, date of importation, tariff classification number, rate of duty and amount of duty paid. If a claim for reduction of duties is filed under this paragraph, the reduced duties shall be deposited with Customs when the claim is filed.

(iii) Drawback on goods entered into a duty-deferral program in Canada or Mexico. After goods in a duty-deferral program in the United States which have been sent from the United States and entered into a duty-deferral program in Canada or Mexico are then withdrawn from that Canadian or Mexican duty-deferral program either for entry into Canada or Mexico or for export to a non-NAFTA country, the person who filed the Customs Form 7501, or its electronic equivalent, (see paragraph (a)(2)(iii)(A) of this section) may file a claim for drawback if the goods are withdrawn within 5 years from the date of the original importation of the good into the United States. If the goods are entered for consumption in Canada or Mexico, drawback will be calculated in accordance with § 181.44 of this part.

(4) Liquidation of entry—(i) If no claim is filed. If no claim for a waiver or reduction of duties is filed in accordance with paragraph (a)(3) of this section, Customs shall determine the final duties due under paragraph (a)(2)(i) of this section and shall post a bulletin notice of liquidation of the entry filed under this section in accordance with § 159.9 of this chapter. Where no claim was filed in accordance with this section and Customs fails to liquidate, or extend liquidation of, the entry filed under this section within 1 year from the date of the entry, upon the date of expiration of that 1-year period the entry shall be deemed liquidated by operation of law in the amount asserted by the exporter on the Customs Form 7501, or its electronic equivalent, filed under paragraph (a)(2)(iii)(A) of this section. A protest under section 514, Tariff Act of 1930, as amended (19 U.S.C. 1514), and part 174 of this chapter shall be filed within 90 days from the date of posting of the notice of liquidation under this section.

(ii) If a claim is filed. If a claim for a waiver or reduction of duties is filed in accordance with paragraph (a)(3) of this section, an extension of liquidation of the entry filed under this section shall take effect for a period not to exceed 3 years from the date the entry was filed. Before the close of the extension period, Customs shall liquidate the entry filed under this section and shall post a bulletin notice of liquidation in accordance with § 159.9 of this chapter. If Customs fails to liquidate the entry filed under this section within 4 years from the date of the entry, upon the date of expiration of that 4-year period the entry shall be deemed liquidated by operation of law in the amount asserted by the exporter on the Customs Form 7501, or its electronic equivalent, filed under paragraph (a)(3)(ii) of this section. A protest under section 514, Tariff Act of 1930, as amended (19 U.S.C. 1514), and part 174 of this chapter shall be filed within 90 days from the date of posting of the notice of liquidation under this section.

(b) Assessment and waiver or reduction of duty—(1) Manipulation in warehouse. Where a good subject to NAFTA drawback under this subpart is withdrawn from a bonded warehouse (19 U.S.C. 1562) after manipulation for exportation to Canada or Mexico or for entry into a duty-deferral program in Canada or Mexico, duty shall be assessed on the good in its condition and quantity, and at its weight, at the time of such withdrawal from the warehouse and with such additions to, or deductions from, the final appraised value as may be necessary by reason of its change in condition. Such duty shall be paid no later than 60 calendar days after the date of exportation or of entry into the duty-deferral program of Canada or Mexico, except that, upon filing of a proper claim under paragraph (a)(3) of this section, the duty shall be waived or reduced in an amount that does not exceed the lesser of the total amount of duty payable on the good under this section or the total amount of customs duties paid to Canada or Mexico.

(2) Bonded manufacturing warehouse. Where a good is manufactured in a bonded warehouse (19 U.S.C. 1311) with imported materials and is then withdrawn for exportation to Canada or Mexico or for entry into a duty-deferral program in Canada or Mexico, duty shall be assessed on the materials in their condition and quantity, and at their weight, at the time of their importation into the United States. Such duty shall be paid no later than 60 calendar days after either the date of exportation or of entry into a duty-deferral program of Canada or Mexico, except that, upon filing of a proper claim under paragraph (a)(3) of this section, the duty shall be waived or reduced in an amount that does not exceed the lesser of the total amount of duty payable on the materials under this section or the total amount of customs duties paid to Canada or Mexico.

Example.Company N imports tea into the United States and makes a Class 6 warehouse entry. Company N manufactures sweetened ice tea mix by combining the imported tea with refined cane sugar and other flavorings and packaging it in retail size canisters. Upon withdrawal of the ice tea mix from the warehouse for exportation to Canada, a Customs Form 7501, or its electronic equivalent, is filed showing $900 in estimated U.S. duties on the basis of the unmanufactured tea. Upon entry into Canada, the equivalent of US$800 is assessed on the exported ice tea mix. Company N submits to Customs a proper claim under paragraph (a)(3) of this section showing payment of the US$800 equivalent in duties to Canada. Company N will only be required to pay $100 in U.S. duties out of the $900 amount reflected on the Customs Form 7501.

(3) Bonded smelting or refining warehouse. For any qualifying imported metal-bearing materials (19 U.S.C. 1312), duty shall be assessed on the imported materials and the charges against the bond canceled no later than 60 calendar days after either the date of exportation of the treated materials to Canada or Mexico or the date of entry of the treated materials into a duty-deferral program of Canada or Mexico, either from the bonded smelting or refining warehouse or from such other customs bonded warehouse after the transfer of the same quantity of material from a bonded smelting or refining warehouse. However, upon filing of a proper claim under paragraph (a)(3) of this section, the duty on the imported materials shall be waived or reduced in an amount that does not exceed the lesser of the total amount of duty payable on the imported materials under this section or the total amount of customs duties paid to Canada or Mexico.

Example.Company Z imports 47 million pounds of electrolytic zinc which is entered into a bonded smelting and refining warehouse (Class 7) for processing. Thereafter, Company Z withdraws the merchandise for exportation to Canada and files a Customs Form 7501, or its electronic equivalent, showing $90,000 in estimated U.S. duty on the dutiable quantity of metal contained in the imported metal-bearing materials. Upon entry of the processed zinc into Canada, the equivalent of US$50,000 in duties are assessed. Within 60 days of exportation Company Z files a proper claim under paragraph (a)(3) of this section and Customs liquidates the entry with duty due in the amount of $40,000.

(4) Foreign trade zone. For a good that is manufactured or otherwise changed in condition in a foreign trade zone (19 U.S.C. 81c(a)) and then withdrawn from the zone for exportation to Canada or Mexico or for entry into a Canadian or Mexican duty-deferral program, the duty assessed, as calculated under paragraph (b)(4)(i) or (b)(4)(ii) of this section, shall be paid no later than 60 calendar days after either the date of exportation of the good to Canada or Mexico or the date of entry of the good into a duty-deferral program of Canada or Mexico, except that, upon filing of a proper claim under paragraph (a)(3) of this section, the duty shall be waived or reduced in an amount that does not exceed the lesser of the total amount of duty payable on the good under this section or the total amount of customs duties paid to Canada or Mexico.

(i) Nonprivileged foreign status. In the case of a nonprivileged foreign status good, duty is assessed on the good in its condition and quantity, and at its weight, at the time of its exportation from the zone to Canada or Mexico or its entry into a duty-deferral program of Canada or Mexico.

Example.CMG imports $1,000,000 worth of auto parts from Korea and admits them into Foreign-Trade Subzone number 00, claiming nonprivileged foreign status. (If the auto parts had been regularly entered they would have been dutiable at 4 percent, or $40,000.) CMG manufactures subcompact automobiles. Automobiles are dutiable at 2.5 percent ($25,000) if entered for consumption in the United States. CMG withdraws the automobiles from the zone and exports them to Mexico. Upon entry of the automobiles in Mexico, CMG pays the equivalent of US$20,000 in duty. Before the expiration of 60 calendar days from the date of exportation, CMG files a proper claim under paragraph (a)(3) of this section and pays $5,000 in duty to Customs representing the difference between the $25,000 which would have been paid if the automobiles had been entered for consumption from the zone and the US$20,000 equivalent paid to Mexico.

(ii) Privileged foreign status. In the case of a privileged foreign status good, duty is assessed on the good in its condition and quantity, and at its weight, at the time privileged status is granted in the zone.

Example.O&G, Inc. admits Kuwaiti crude petroleum into its zone and requests, one month later, privileged foreign status on the crude before refining the crude into motor gasoline and kerosene. Upon withdrawal of the refined goods from the zone by O&G, Inc. for exportation to Canada, a Customs Form 7501, or its electronic equivalent, is filed showing $700 in estimated duties on the imported crude petroleum (rather than on the refined goods which would have been assessed $1,200). D&O is the consignee in Canada and pays the Canadian customs duty assessment of the equivalent of US$1,500 on the goods. O&G, Inc. is entitled to a waiver of the full $700 in duties upon filing of a proper claim under paragraph (a)(3) of this section.

(5) Temporary importation under bond. Except in the case of a good imported from Canada or Mexico for repair or alteration, where a good, regardless of its origin, was imported temporarily free of duty for repair, alteration or processing (subheading 9813.00.05, Harmonized Tariff Schedule of the United States) and is subsequently exported to Canada or Mexico, duty shall be assessed on the good on the basis of its condition at the time of its importation into the United States. Such duty shall be paid no later than 60 calendar days after either the date of exportation or the date of entry into a duty-deferral program of Canada or Mexico, except that, upon filing of a proper claim under paragraph (a)(3) of this section, the duty shall be waived or reduced in an amount that does not exceed the lesser of the total amount of duty payable on the good under this section or the total amount of customs duties paid to Canada or Mexico.

Example.Company A imports glassware under subheading 9813.00.05, HTSUS. The glassware is from France and would be dutiable under a regular consumption entry at $6,000. Company A alters the glassware by etching hotel logos on the glassware. Two weeks later, Company A sells the glassware to Company B, a Mexican company, and ships the glassware to Mexico. Company B enters the glassware and is assessed duties in an amount equivalent to US$6,200 and claims NAFTA preferential tariff treatment. Company B provides a copy of the Mexican landing certificate to Company A showing that the US$6,200 equivalent in duties was assessed but not yet paid to Mexico. If Mexico ultimately denies Company B's NAFTA claim and the Mexican duty payment becomes final, Company A, upon submission to Customs of a proper claim under paragraph (a)(3) of this section, is entitled to a waiver of the full $6,000 in U.S. duty.

(c) Recordkeeping requirements. If a person intends to claim a waiver or reduction of duty on goods under this section, that person shall maintain records concerning the value of all involved goods or materials at the time of their importation into the United States and concerning the value of the goods at the time of their exportation to Canada or Mexico or entry into a duty-deferral program of Canada or Mexico, and if a person files a claim under this section for a waiver or reduction of duty on goods exported to Canada or Mexico or entered into a Canadian or Mexican duty-deferral program, that person shall maintain evidence of exportation or entry into a Canadian or Mexican duty-deferral program and satisfactory evidence of the amount of any customs duties paid to Canada or Mexico on the good (see § 181.47(c)). Failure to maintain adequate records will result in denial of the claim for waiver or reduction of duty.

(d) Failure to file proper claim. If the person identified in paragraph (a)(2)(iii)(A) of this section fails to file a proper claim within the 60-day period specified in this section, that person, or the FTZ operator pursuant to paragraph (a)(2)(iii)(A)(3) of this section, will be liable for payment of the full duties assessed under this section and without any waiver or reduction thereof.

(e) Subsequent claims for preferential tariff treatment. If a claim for a refund of duties is allowed by the Canadian or Mexican customs administration under Article 502(3) of the NAFTA or under any other circumstance after duties have been waived or reduced under this section, Customs may reliquidate the entry filed under this section pursuant to 19 U.S.C. 1508(b)(2)(B)(iii) even after liquidation of the entry has become final.

[T.D. 96-14, 61 FR 2911, Jan. 30, 1996; 61 FR 6111, Feb. 16, 1996, as amended by CBP Dec. 15-14, 80 FR 61292, Oct. 13, 2015]

§ 181.54 - Verification of claim for drawback, waiver or reduction of duties.

The allowance of a claim for drawback, waiver or reduction of duties submitted under this subpart shall be subject to such verification, including verification with the Canadian or Mexican customs administration of any documentation obtained in Canada or Mexico and submitted in connection with the claim, as Customs may deem necessary.

authority: 19 U.S.C. 66,1202,Harmonized,1624,3314;

source: T.D. 95-68, 60 FR 46364, Sept. 6, 1995, unless otherwise noted.

cite as: 19 CFR 181.42