Section 313(a) of the Act, as amended (19 U.S.C. 1313(a)), provides for drawback upon the exportation, or destruction under CBP supervision, of articles manufactured or produced in the United States with the use of imported merchandise, provided that those articles have not been used in the United States prior to such exportation or destruction. The amount of drawback allowable will not exceed 99 percent of the amount of duties, taxes, and fees paid with respect to the imported merchandise. However, duties may not be refunded upon the exportation or destruction of flour or by-products produced from imported wheat. Where two or more products result, drawback must be distributed among the products in accordance with their relative values, as defined in § 190.2, at the time of separation. Merchandise may be identified for drawback purposes under 19 U.S.C. 1313(a) in the manner provided for and prescribed in § 190.14.

(a)(1) General—(i) Substitution standard. If imported, duty-paid merchandise or merchandise classifiable under the same 8-digit HTSUS subheading number as the imported merchandise is used in the manufacture or production of articles within a period not to exceed 5 years from the date of importation of such imported merchandise, then upon the exportation, or destruction under CBP supervision, of any such articles, without their having been used in the United States prior to such exportation or destruction, drawback is provided for in section 313(b) of the Act, as amended (19 U.S.C. 1313(b)). Drawback is allowable even though none of the imported, duty-paid merchandise may actually have been used in the manufacture or production of the exported or destroyed articles. The amount of duties, taxes, and fees eligible for drawback is determined by per unit averaging, as defined in § 190.2, for any drawback claim based on 19 U.S.C. 1313(b).

(ii) Allowable refund—(A) Exportation. In the case of an article that is exported, the amount of drawback allowable will not exceed 99 percent of the lesser of:

(1) The amount of duties, taxes, and fees paid with respect to the imported merchandise; or

(2) The amount of duties, taxes, and fees that would apply to the substituted merchandise if the substituted merchandise were imported.

(B) Destruction. In the case of an article that is destroyed, the amount of drawback allowable will not exceed 99 percent of the lesser of:

(1) The amount of duties, taxes, and fees paid with respect to the imported merchandise (after the value of the imported merchandise has been reduced by the value of materials recovered during destruction as provided in 19 U.S.C. 1313(x)); or

(2) The amount of duties, taxes, and fees that would apply to the substituted merchandise if the substituted merchandise were imported (after the value of the imported merchandise has been reduced by the value of materials recovered during destruction as provided in 19 U.S.C. 1313(x)).

(C) Federal excise tax. For purposes of drawback of internal revenue tax imposed under Chapters 32, 38 (with the exception of Subchapter A of Chapter 38), 51, and 52 of the Internal Revenue Code of 1986, as amended (IRC), drawback granted on the export or destruction of substituted merchandise will be limited to the amount of taxes paid (and not returned by refund, credit, or drawback) on the substituted merchandise.

(2) Special rule for sought chemical elements—(i) Substitution standard. A sought chemical element, as defined in § 190.2, may be considered imported merchandise, or merchandise classifiable under the same 8-digit HTSUS subheading number as such imported merchandise, used in the manufacture or production of an article as described in paragraph (a)(1)(i) of this section, and it may be substituted for source material containing that sought chemical element, without regard to whether the sought chemical element and the source material are classifiable under the same 8-digit HTSUS subheading number, and apportioned quantitatively, as appropriate (see § 190.26(b)(4)).

(ii) Allowable refund. The amount of drawback allowable will be determined in accordance with paragraph (a)(1)(ii) of this section. The value of the substituted source material must be determined based on the quantity of the sought chemical element present in the source material, as calculated per § 190.26(b)(4).

(b) Use by same manufacturer or producer at different factory. Duty-paid merchandise or drawback products used at one factory of a manufacturer or producer within 5 years after the date on which the material was imported may be designated as the basis for drawback on articles manufactured or produced in accordance with these regulations at other factories of the same manufacturer or producer.

(c) Designation. A manufacturer or producer may designate any eligible imported merchandise or drawback product which it has used in manufacture or production.

(d) Designation by successor—(1) General rule. Upon compliance with the requirements in this section and under 19 U.S.C. 1313(s), a drawback successor as defined in paragraph (d)(2) of this section may designate merchandise or drawback product used by a predecessor before the date of succession as the basis for drawback on articles manufactured or produced by the successor after the date of succession.

(2) Drawback successor. A “drawback successor” is a manufacturer or producer to whom another entity (predecessor) has transferred, by written agreement, merger, or corporate resolution:

(i) All or substantially all of the rights, privileges, immunities, powers, duties, and liabilities of the predecessor; or

(ii) The assets and other business interests of a division, plant, or other business unit of such predecessor, but only if in such transfer the value of the transferred realty, personalty, and intangibles (other than drawback rights, inchoate or otherwise) exceeds the value of all transferred drawback rights, inchoate or otherwise.

(3) Certifications and required evidence—(i) Records of predecessor. The predecessor or successor must certify that the successor is in possession of the predecessor's records which are necessary to establish the right to drawback under the law and regulations with respect to the merchandise or drawback product.

(ii) Merchandise not otherwise designated. The predecessor or successor must certify that the predecessor has not designated and will not designate, nor enable any other person to designate, such merchandise or product as the basis for drawback.

(iii) Value of transferred property. In instances in which assets and other business interests of a division, plant, or other business unit of a predecessor are transferred, the predecessor or successor must specify, and maintain supporting records to establish, the value of the drawback rights and the value of all other transferred property.

(iv) Review by CBP. The written agreement, merger, or corporate resolution, provided for in paragraph (d)(2) of this section, and the records and evidence provided for in paragraph (d)(3)(i) through (iii) of this section, must be retained by the appropriate party(s) for 3 years from the date of liquidation of the related claim and are subject to review by CBP upon request.

(e) Multiple products—(1) General. Where two or more products are produced concurrently in a substitution manufacturing operation, drawback will be distributed to each product in accordance with its relative value (see § 190.2) at the time of separation.

(2) Claims covering a manufacturing period. Where the claim covers a manufacturing period rather than a manufacturing lot, the entire period covered by the claim is the time of separation of the products and the value per unit of product is the market value for the period (as provided for in the definition of relative value in § 190.2). Manufacturing periods in excess of one month may not be used without specific approval of CBP.

(3) Recordkeeping. Records must be maintained showing the relative value of each product at the time of separation.

Claims must be based on one or more of the methods specified in paragraph (a) of this section and comply with all other requirements specified in this section.

(a) Method of claiming drawback.—(1) Used in. Drawback may be paid based on the amount of the imported or substituted merchandise used in the manufacture of the exported article, where there is no waste or the waste is valueless or unrecoverable. This method must be used when multiple products also necessarily and concurrently result from the manufacturing process, and there is no valuable waste (see paragraph (a)(2) of this section).

(2) Used in less valuable waste. Drawback is allowable under this method based on the quantity of merchandise or drawback products used to manufacture the exported or destroyed article, reduced by an amount equal to the quantity of this merchandise that the value of the waste would replace. This method must be used when multiple products also necessarily and concurrently result from the manufacturing process, and there is valuable waste.

(3) Relative value. Drawback is also allowable under this method when two or more products result from manufacturing or production. The relative value method must be used when multiple products also necessarily and concurrently result from the manufacturing process, and drawback must be distributed among the products in accordance with their relative values (as defined in § 190.2) at the time of separation.

(4) Appearing in. Drawback is allowable under this method based only on the amount of imported or substituted merchandise that appears in (is contained in) the exported articles. The appearing in method may not be used if there are multiple products also necessarily and concurrently resulting from the manufacturing process.

(b) Abstract or schedule. A drawback claimant may use either the abstract or schedule method to show the quantity of material used or appearing in the exported or destroyed article. An abstract is the summary of records which shows the total quantity used in or appearing in all articles produced during the period covered by the abstract. A schedule shows the quantity of material actually used in producing, or appearing in, each unit of product. Manufacturers or producers submitting letters of notification of intent to operate under a general manufacturing drawback ruling (see § 190.7) and applicants for approval of specific manufacturing drawback rulings (see § 190.8) must state whether the abstract or schedule method is used; if no such statement is made, drawback claims must be based upon the abstract method.

(c) Claim for waste.—(1) Valuable waste. When the waste has a value and the drawback claim is not limited to the quantity of imported or substituted merchandise or drawback products appearing in the exported or destroyed articles claimed for drawback, the manufacturer or producer must keep records to show the market value of the merchandise or drawback products used to manufacture or produce the exported or destroyed articles, as well as the market value of the resulting waste, under the used in less valuable waste method (as provided for in the definition of relative value in § 190.2).

(2) If claim for waste is waived. If claim for waste is waived, only the “appearing in” basis may be used (see paragraph (a)(4) of this section). Waste records need not be kept unless required to establish the quantity of imported duty-paid merchandise or drawback products appearing in the exported or destroyed articles claimed for drawback.

Evidence of any transfers of merchandise (see § 190.10) must be evidenced by records, as defined in § 190.2.

A claimant may destroy merchandise and obtain drawback by complying with the procedures set forth in § 190.71 relating to destruction.

(a) Direct identification. (1) Records required. Each manufacturer or producer under 19 U.S.C. 1313(a) must keep records to allow the verifying CBP official to trace all articles manufactured or produced for exportation or destruction with drawback, from importation, through manufacture or production, to exportation or destruction. To this end, these records must specifically establish:

(i) The date or inclusive dates of manufacture or production;

(ii) The quantity, identity, and 8-digit HTSUS subheading number(s) of the imported duty-paid merchandise or drawback products used in or appearing in (see § 190.23) the articles manufactured or produced;

(iii) The quantity, if any, of the non-drawback merchandise used, when these records are necessary to determine the quantity of imported duty-paid merchandise or drawback product used in the manufacture or production of the exported or destroyed articles or appearing in them;

(iv) The quantity and description of the articles manufactured or produced;

(v) The quantity of waste incurred, if applicable; and

(vi) That the articles on which drawback is claimed were exported or destroyed within 5 years after the importation of the duty-paid merchandise, without having been used in the United States prior to such exportation or destruction. (If the articles were commingled after manufacture or production, their identity may be maintained in the manner prescribed in § 190.14.)

(2) Accounting. The merchandise and articles to be exported or destroyed will be accounted for in a manner which will enable the manufacturer, producer, or claimant:

(i) To determine, and the CBP official to verify, the applicable import entry and any transfers of the merchandise associated with the claim; and

(ii) To identify with respect to that import entry, and any transfers of the merchandise, the imported merchandise or drawback products used in manufacture or production.

(b) Substitution. The records of the manufacturer or producer of articles manufactured or produced in accordance with 19 U.S.C. 1313(b) must establish the facts in paragraph (a)(1)(i), (iv) through (vi) of this section, and:

(1) The quantity, identity, and specifications of the merchandise designated (imported duty-paid, or drawback product);

(2) The quantity, identity, and specifications of the substituted merchandise before its use to manufacture or produce (or appearing in) the exported or destroyed articles;

(3) That, within 5 years after the date of importation of the imported duty-paid merchandise, the manufacturer or producer used the designated merchandise in manufacturing or production and that during the same5-year period it manufactured or produced the exported or destroyed articles; and

(4) If the designated merchandise is a sought chemical element, as defined in § 190.2, that was contained in imported material and a substitution drawback claim is made based on that chemical element:

(i) The duties, taxes, and fees paid on the imported material must be apportioned among its constituent components. The claim on the chemical element that is the designated merchandise must be limited to the duty apportioned to that element on a unit-for-unit attribution using the unit of measure set forth in the HTSUS that is applicable to the imported material. If the material is a compound with other constituents, including impurities, and the purity of the compound in the imported material is shown by satisfactory analysis, that purity, converted to a decimal equivalent of the percentage, is multiplied against the entered amount of the material to establish the amount of pure compound. The amount of the element in the pure compound is to be determined by use of the atomic weights of the constituent elements and converting to the decimal equivalent of their respective percentages and multiplying that decimal equivalent against the above-determined amount of pure compound.

(ii) The amount claimed as drawback based on the sought chemical element must be deducted from the amounts paid on the imported material that may be claimed on any other drawback claim.

Example to paragraph (b)(4): Synthetic rutile that is shown by appropriate analysis in the entry papers to be 91.7% pure titanium dioxide is imported and dutiable at a 5% ad valorem duty rate. The amount of imported synthetic rutile is 30,000 pounds with an entered value of $12,000. The total duty paid is $600. Titanium in the synthetic rutile is designated as the basis for a drawback claim under 19 U.S.C. 1313(b). The amount of titanium dioxide in the synthetic rutile is determined by converting the purity percentage (91.7%) to its decimal equivalent (.917) and multiplying the entered amount of synthetic rutile (30,000 pounds) by that decimal equivalent (.917 × 30,000 = 27,510 pounds of titanium dioxide contained in the 30,000 pounds of imported synthetic rutile). The titanium, based on atomic weight, represents 59.93% of the constituents in titanium dioxide. Multiplying that percentage, converted to its decimal equivalent, by the amount of titanium dioxide determines the titanium content of the imported synthetic rutile (.5993 × 27,510 pounds of titanium dioxide = 16,486.7 pounds of titanium contained in the imported synthetic rutile). Therefore, up to 16,486.7 pounds of titanium is available to be designated as the basis for drawback. As the per unit duty paid on the synthetic rutile is calculated by dividing the duty paid ($600) by the amount of imported synthetic rutile (30,000 pounds), the per unit duty is two cents of duty per pound of the imported synthetic rutile ($600 ÷ 30,000 = $0.02). The duty on the titanium is calculated by multiplying the amount of titanium contained in the imported synthetic rutile by two cents of duty per pound (16,486.7 × $0.02 = $329.73 duty apportioned to the titanium). The product is then multiplied by 99% to determine the maximum amount of drawback available ($329.73 × .99 = $326.44). If an exported titanium alloy ingot weighs 17,000 pounds, in which 16,000 pounds of titanium was used to make the ingot, drawback is determined by multiplying the duty per pound ($0.02) by the weight of the titanium contained in the ingot (16,000 pounds) to calculate the duty available for drawback ($0.02 × 16,000 = $320.00). Because only 99% of the duty can be claimed, drawback is determined by multiplying this available duty amount by 99% (.99 × $320.00 = $316.80). As the oxygen content of the titanium dioxide is 45% of the synthetic rutile, if oxygen is the designated merchandise on another drawback claim, 45% of the duty claimed on the synthetic rutile would be available for drawback based on the substitution of oxygen.

(c) Valuable waste records. When waste has a value and the manufacturer, producer, or claimant, has not limited the claims based on the quantity of imported or substituted merchandise appearing in the articles exported or destroyed, the manufacturer or producer must keep records to show the market value of the merchandise used to manufacture or produce the exported or destroyed article, as well as the quantity and market value of the waste incurred (as provided for in the definition of relative value in § 190.2). In such records, the quantity of merchandise identified or designated for drawback, under 19 U.S.C. 1313(a) or 1313(b), respectively, must be based on the quantity of merchandise actually used to manufacture or produce the exported or destroyed articles. The waste replacement reduction will be determined by reducing from the quantity of merchandise actually used by the amount of merchandise which the value of the waste would replace.

(d) Purchase of manufactured or produced articles for exportation or destruction. Where the claimant purchases articles from the manufacturer or producer and exports or destroys them, the claimant must maintain records to document the transfer of articles received.

(e) Multiple claimants—(1) General. Multiple claimants may file for drawback with respect to the same export or destruction (for example, if an automobile is exported, where different parts of the automobile have been produced by different manufacturers under drawback conditions and the exporter waives the right to claim drawback and assigns such right to the manufacturers under § 190.82).

(2) Procedures—(i) Submission of letter. Each drawback claimant must file a separate letter, as part of the claim, describing the component article to which each claim will relate. Each letter must show the name of the claimant and bear a statement that the claim will be limited to its respective component article. The exporter or destroyer must endorse the letters, as required, to show the respective interests of the claimants.

(ii) Blanket waivers and assignments of drawback rights. Exporters may waive and assign their drawback rights for all, or any portion, of their exportations with respect to a particular commodity for a given period to a drawback claimant.

(f) Retention of records. Pursuant to 19 U.S.C. 1508(c)(3), all records required to be kept by the manufacturer, producer, or claimant with respect to drawback claims, and records kept by others to complement the records of the manufacturer, producer, or claimant with respect to drawback claims must be retained for 3 years after the date of liquidation of the related claims (under 19 U.S.C. 1508,the.

(a) Direct identification. Drawback will be allowed on imported merchandise used to manufacture or produce articles that are exported or destroyed under CBP supervision within 5 years after importation of the merchandise identified to support the claim.

(b) Substitution. Drawback will be allowed on the imported merchandise if the following conditions are met:

(1) The designated merchandise is used in manufacture or production within 5 years after importation;

(2) Within the 5-year period described in paragraph (b)(1) of this section, the exported or destroyed articles, or drawback products, were manufactured or produced; and

(3) The completed articles must be exported or destroyed under CBP supervision within 5 years of the date of importation of the designated merchandise, or within 5 years of the earliest date of importation associated with a drawback product.

(c) Drawback claims filed before specific or general manufacturing drawback ruling approved or acknowledged. Drawback claims may be filed before the letter of notification of intent to operate under a general manufacturing drawback ruling covering the claims is acknowledged (§ 190.7), or before the specific manufacturing drawback ruling covering the claims is approved (§ 190.8), but no drawback will be paid until such acknowledgement or approval, as appropriate.

The exporter (or destroyer) will be entitled to claim drawback, unless the exporter (or destroyer), by means of a certification, assigns the right to claim drawback to the manufacturer, producer, importer, or intermediate party. Such certification must accompany each claim and also affirm that the exporter (or destroyer) has not claimed and will not itself claim drawback or assign the right to claim drawback on the particular exportation or destruction to any other party. The certification provided for under this section may be a blanket certification for a stated period. Drawback is paid to the claimant, who may be the manufacturer, producer, intermediate party, importer, or exporter (or destroyer).

At the time of filing a claim under 19 U.S.C. 1313(a) or (b), the claimant must certify the following:

(a) The claimant is in possession of the applicable bill of materials or formula for the exported or destroyed article(s), which will be promptly provided upon request;

(b) The bill of materials or formula identifies the imported and/or substituted merchandise and the exported or destroyed article(s) by their 8-digit HTSUS subheading numbers; and

(c) The bill of materials or formula identifies the manufactured quantities of the imported and/or substituted merchandise and the exported or destroyed article(s).