(a) General. (1) As provided by this section, an applicant must inform the Food and Drug Administration (FDA) (see mailing addresses in § 600.2 of this chapter) about each change in the product, production process, quality controls, equipment, facilities, responsible personnel, or labeling established in the approved license application(s).

(2) Before distributing a product made using a change, an applicant must assess the effects of the change and demonstrate through appropriate validation and/or other clinical and/or nonclinical laboratory studies the lack of adverse effect of the change on the identity, strength, quality, purity, or potency of the product as they may relate to the safety or effectiveness of the product.

(3) Notwithstanding the requirements of paragraphs (b), (c), and (f) of this section, an applicant must make a change provided for in those paragraphs in accordance with a regulation or guidance that provides for a less burdensome notification of the change (for example, by submission of a supplement that does not require approval prior to distribution of the product or in an annual report).

(4) The applicant must promptly revise all promotional labeling and advertising to make it consistent with any labeling change implemented in accordance with paragraphs (f)(1) and (f)(2) of this section.

(5) A supplement or annual report must include a list of all changes contained in the supplement or annual report. For supplements, this list must be provided in the cover letter.

(b) Changes requiring supplement submission and approval prior to distribution of the product made using the change (major changes). (1) A supplement shall be submitted for any change in the product, production process, quality controls, equipment, facilities, or responsible personnel that has a substantial potential to have an adverse effect on the identity, strength, quality, purity, or potency of the product as they may relate to the safety or effectiveness of the product.

(2) These changes include, but are not limited to:

(i) Except as provided in paragraphs (c) and (d) of this section, changes in the qualitative or quantitative formulation, including inactive ingredients, or in the specifications provided in the approved application;

(ii) Changes requiring completion of an appropriate human study to demonstrate the equivalence of the identity, strength, quality, purity, or potency of the product as they may relate to the safety or effectiveness of the product;

(iii) Changes in the virus or adventitious agent removal or inactivation method(s);

(iv) Changes in the source material or cell line;

(v) Establishment of a new master cell bank or seed; and

(vi) Changes which may affect product sterility assurance, such as changes in product or component sterilization method(s), or an addition, deletion, or substitution of steps in an aseptic processing operation.

(3) The applicant must obtain approval of the supplement from FDA prior to distribution of the product made using the change. Except for submissions under paragraph (e) of this section, the following shall be contained in the supplement:

(i) A detailed description of the proposed change;

(ii) The product(s) involved;

(iii) The manufacturing site(s) or area(s) affected;

(iv) A description of the methods used and studies performed to evaluate the effect of the change on the identity, strength, quality, purity, or potency of the product as they may relate to the safety or effectiveness of the product;

(v) The data derived from such studies;

(vi) Relevant validation protocols and data; and

(vii) A reference list of relevant standard operating procedures (SOP's).

(4) An applicant may ask FDA to expedite its review of a supplement for public health reasons or if a delay in making the change described in it would impose an extraordinary hardship on the applicant. Such a supplement and its mailing cover should be plainly marked: “Prior Approval Supplement-Expedited Review Requested.

(c) Changes requiring supplement submission at least 30 days prior to distribution of the product made using the change. (1) A supplement shall be submitted for any change in the product, production process, quality controls, equipment, facilities, or responsible personnel that has a moderate potential to have an adverse effect on the identity, strength, quality, purity, or potency of the product as they may relate to the safety or effectiveness of the product. The supplement shall be labeled “Supplement—Changes Being Effected in 30 Days” or, if applicable under paragraph (c)(5) of this section, “Supplement—Changes Being Effected.”

(2) These changes include, but are not limited to:

(i) [Reserved]

(ii) An increase or decrease in production scale during finishing steps that involves different equipment; and

(iii) Replacement of equipment with that of similar, but not identical, design and operating principle that does not affect the process methodology or process operating parameters.

(iv) Relaxation of an acceptance criterion or deletion of a test to comply with an official compendium that is consistent with FDA statutory and regulatory requirements.

(3) Pending approval of the supplement by FDA, and except as provided in paragraph (c)(5) of this section, distribution of the product made using the change may begin not less than 30 days after receipt of the supplement by FDA. The information listed in paragraph (b)(3)(i) through (b)(3)(vii) of this section shall be contained in the supplement.

(4) If within 30 days following FDA's receipt of the supplement, FDA informs the applicant that either:

(i) The change requires approval prior to distribution of the product in accordance with paragraph (b) of this section; or

(ii) Any of the information required under paragraph (c)(3) of this section is missing; the applicant shall not distribute the product made using the change until FDA determines that compliance with this section is achieved.

(5) In certain circumstances, FDA may determine that, based on experience with a particular type of change, the supplement for such change is usually complete and provides the proper information, and on particular assurances that the proposed change has been appropriately submitted, the product made using the change may be distributed immediately upon receipt of the supplement by FDA. These circumstances may include substantial similarity with a type of change regularly involving a “Supplement—Changes Being Effected” supplement or a situation in which the applicant presents evidence that the proposed change has been validated in accordance with an approved protocol for such change under paragraph (e) of this section.

(6) If the agency disapproves the supplemental application, it may order the manufacturer to cease distribution of the products made with the manufacturing change.

(d) Changes to be described in an annual report (minor changes). (1) Changes in the product, production process, quality controls, equipment, facilities, or responsible personnel that have a minimal potential to have an adverse effect on the identity, strength, quality, purity, or potency of the product as they may relate to the safety or effectiveness of the product shall be documented by the applicant in an annual report submitted each year within 60 days of the anniversary date of approval of the application. The Director, Center for Biologics Evaluation and Research or the Director, Center for Drug Evaluation and Research, may approve a written request for an alternative date to combine annual reports for multiple approved applications into a single annual report submission.

(2) These changes include, but are not limited to:

(i) Any change made to comply with a change to an official compendium, except a change described in paragraph (c)(2)(iv) of this section, that is consistent with FDA statutory and regulatory requirements.

(ii) The deletion or reduction of an ingredient intended only to affect the color of the product, except that a change intended only to affect Blood Grouping Reagents requires supplement submission and approval prior to distribution of the product made using the change in accordance with the requirements set forth in paragraph (b) of this section;

(iii) An extension of an expiration dating period based upon full shelf life data on production batches obtained from a protocol approved in the application;

(iv) A change within the container closure system for a nonsterile product, based upon a showing of equivalency to the approved system under a protocol approved in the application or published in an official compendium;

(v) A change in the size and/or shape of a container containing the same number of dosage units for a nonsterile solid dosage form product, without a change from one container closure system to another;

(vi) The addition by embossing, debossing, or engraving of a code imprint to a solid dosage form biological product other than a modified release dosage form, or a minor change in an existing code imprint; and

(vii) The addition or revision of an alternative analytical procedure that provides the same or increased assurance of the identity, strength, quality, purity, or potency of the material being tested as the analytical procedure described in the approved application, or deletion of an alternative analytical procedure.

(3) The following information for each change shall be contained in the annual report:

(i) A list of all products involved; and

(ii) A full description of the manufacturing and controls changes including: the manufacturing site(s) or area(s) involved; the date the change was made; a cross-reference to relevant validation protocols and/or SOP's; and relevant data from studies and tests performed to evaluate the effect of the change on the identity, strength, quality, purity, or potency of the product as they may relate to the safety or effectiveness of the product.

(iii) A statement by the holder of the approved application or license that the effects of the change have been assessed.

(4) The applicant shall submit the report to the FDA office responsible for reviewing the application. The report shall include all the information required under this paragraph for each change made during the annual reporting interval which ends on the anniversary date in the order in which they were implemented.

(e) An applicant may submit one or more protocols describing the specific tests and validation studies and acceptable limits to be achieved to demonstrate the lack of adverse effect for specified types of manufacturing changes on the identity, strength, quality, purity, or potency of the product as they may relate to the safety or effectiveness of the product. Any such protocols, or change to a protocol, shall be submitted as a supplement requiring approval from FDA prior to distribution of the product which, if approved, may justify a reduced reporting category for the particular change because the use of the protocol for that type of change reduces the potential risk of an adverse effect.

(f) Labeling changes. (1) Labeling changes requiring supplement submission—FDA approval must be obtained before distribution of the product with the labeling change. Except as described in paragraphs (f)(2) and (f)(3) of this section, an applicant shall submit a supplement describing a proposed change in the package insert, package label, container label, or, if applicable, a Medication Guide required under part 208 of this chapter, and include the information necessary to support the proposed change. An applicant cannot use paragraph (f)(2) of this section to make any change to the information required in § 201.57(a) of this chapter. An applicant may report the minor changes to the information specified in paragraph (f)(3)(i)(D) of this section in an annual report. The supplement shall clearly highlight the proposed change in the labeling. The applicant shall obtain approval from FDA prior to distribution of the product with the labeling change.

(2) Labeling changes requiring supplement submission—product with a labeling change that may be distributed before FDA approval. (i) An applicant shall submit, at the time such change is made, a supplement for any change in the package insert, package label, or container label to reflect newly acquired information, except for changes to the package insert required in § 201.57(a) of this chapter (which must be made under paragraph (f)(1) of this section), to accomplish any of the following:

(A) To add or strengthen a contraindication, warning, precaution, or adverse reaction for which the evidence of a causal association satisfies the standard for inclusion in the labeling under § 201.57(c) of this chapter;

(B) To add or strengthen a statement about abuse, dependence, psychological effect, or overdosage;

(C) To add or strengthen an instruction about dosage and administration that is intended to increase the safety of the use of the product; and

(D) To delete false, misleading, or unsupported indications for use or claims for effectiveness.

(E) Any labeling change normally requiring a supplement submission and approval prior to distribution of the product that FDA specifically requests be submitted under this provision.

(ii) Pending approval of the supplement by FDA, the applicant may distribute a product with a package insert, package label, or container label bearing such change at the time the supplement is submitted. The supplement shall clearly identify the change being made and include necessary supporting data. The supplement and its mailing cover shall be plainly marked: “Special Labeling Supplement—Changes Being Effected.”

(3) Labeling changes requiring submission in an annual report. (i) An applicant shall submit any final printed package insert, package label, container label, or Medication Guide required under part 208 of this chapter incorporating the following changes in an annual report submitted to FDA each year as provided in paragraph (d)(1) of this section:

(A) Editorial or similar minor changes;

(B) A change in the information on how the product is supplied that does not involve a change in the dosage strength or dosage form;

(C) A change in the information specified in § 208.20(b)(8)(iii) and (b)(8)(iv) of this chapter for a Medication Guide; and

(D) A change to the information required in § 201.57(a) of this chapter as follows:

(1) Removal of a listed section(s) specified in § 201.57(a)(5) of this chapter; and

(2) Changes to the most recent revision date of the labeling as specified in § 201.57(a)(15) of this chapter.

(E) A change made pursuant to an exception or alternative granted under § 201.26 or § 610.68 of this chapter.

(ii) The applicant may distribute a product with a package insert, package label, or container label bearing such change at the time the change is made.

(4) Advertisements and promotional labeling. Advertisements and promotional labeling shall be submitted to the Center for Biologics Evaluation and Research or Center for Drug Evaluation and Research in accordance with the requirements set forth in § 314.81(b)(3)(i) of this chapter.

(5) The submission and grant of a written request for an exception or alternative under § 201.26 or § 610.68 of this chapter satisfies the requirements in paragraphs (f)(1) through (f)(2) of this section.

(6) For purposes of paragraph (f)(2) of this section, information will be considered newly acquired if it consists of data, analyses, or other information not previously submitted to the agency, which may include (but are not limited to) data derived from new clinical studies, reports of adverse events, or new analyses of previously submitted data (e.g., meta-analyses) if the studies, events or analyses reveal risks of a different type or greater severity or frequency than previously included in submissions to FDA.

(g) Failure to comply. In addition to other remedies available in law and regulations, in the event of repeated failure of the applicant to comply with this section, FDA may require that the applicant submit a supplement for any proposed change and obtain approval of the supplement by FDA prior to distribution of the product made using the change.

(h) Administrative review. Under § 10.75 of this chapter, an applicant may request internal FDA review of FDA employee decisions under this section.

(a) General. Electronic format submissions must be in a form that FDA can process, review, and archive. FDA will periodically issue guidance on how to provide the electronic submission (e.g., method of transmission, media, file formats, preparation and organization of files.)

(b) Labeling. The content of labeling required under § 201.100(d)(3) of this chapter (commonly referred to as the package insert or professional labeling), including all text, tables, and figures, must be submitted to the agency in electronic format as described in paragraph (a) of this section. This requirement is in addition to the provisions of §§ 601.2(a) and 601.12(f) that require applicants to submit specimens of the labels, enclosures, and containers, or to submit other final printed labeling. Submissions under this paragraph must be made in accordance with part 11 of this chapter except for the requirements of § 11.10(a), (c) through (h), and (k), and the corresponding requirements of § 11.30.

Random samples of each importation, obtained by the District Director of Customs and forwarded to the Director, Center for Biologics Evaluation and Research or the Director, Center for Drug Evaluation and Research (see mailing addresses in § 600.2(c) of this chapter) must be at least two final containers of each lot of product. A copy of the associated documents which describe and identify the shipment must accompany the shipment for forwarding with the samples to the Director, Center for Biologics Evaluation and Research or the Director, Center for Drug Evaluation and Research (see mailing addresses in § 600.2(c)). For shipments of 20 or less final containers, samples need not be forwarded, provided a copy of an official release from the Center for Biologics Evaluation and Research or Center for Drug Evaluation and Research accompanies each shipment.

(a) Examination—compliance with requirements. A biologics license application shall be approved only upon examination of the product and upon a determination that the product complies with the standards established in the biologics license application and the requirements prescribed in the regulations in this chapter including but not limited to the good manufacturing practice requirements set forth in parts 210, 211, 600, 606, and 820 of this chapter.

(b) Availability of product. No biologics license shall be issued unless:

(1) The product intended for introduction into interstate commerce is available for examination, and

(2) Such product is available for inspection during all phases of manufacture.

(c) Manufacturing process—impairment of assurances. No product shall be licensed if any part of the process of or relating to the manufacture of such product, in the judgment of the Director, Center for Biologics Evaluation and Research or the Director, Center for Drug Evaluation and Research, would impair the assurances of continued safety, purity, and potency as provided by the regulations contained in this chapter.

(d) Inspection—compliance with requirements. A biologics license shall be issued or a biologics license application approved only after inspection of the establishment(s) listed in the biologics license application and upon a determination that the establishment(s) complies with the standards established in the biologics license application and the requirements prescribed in applicable regulations.

(e) One biologics license to cover all locations. One biologics license shall be issued to cover all locations meeting the establishment standards identified in the approved biologics license application and each location shall be subject to inspection by FDA officials.

A biological product undergoing development, but not yet ready for a biologics license, may be shipped or otherwise delivered from one State or possession into another State or possession provided such shipment or delivery is not for introduction or delivery for introduction into interstate commerce, except as provided in sections 505(i) and 520(g) of the Federal Food, Drug, and Cosmetic Act, as amended, and the regulations thereunder (21 CFR parts 312 and 812).

A biologics license issued to a manufacturer and covering all locations of manufacture shall authorize persons other than such manufacturer to conduct at places other than such locations the initial, and partial manufacturing of a product for shipment solely to such manufacturer only to the extent that the names of such persons and places are registered with the Commissioner of Food and Drugs and it is found upon application of such manufacturer, that the product is in short supply due either to the peculiar growth requirements of the organism involved or to the scarcity of the animal required for manufacturing purposes, and such manufacturer has established with respect to such persons and places such procedures, inspections, tests or other arrangements as will ensure full compliance with the applicable regulations of this subchapter related to continued safety, purity, and potency. Such persons and places shall be subject to all regulations of this subchapter except §§ 601.2 to 601.6, 601.9, 601.10, 601.20, 601.21 to 601.33, and 610.60 to 610.65 of this chapter. For persons and places authorized under this section to conduct the initial and partial manufacturing of a product for shipment solely to a manufacturer of a product subject to licensure under § 601.2(c), the following additional regulations shall not be applicable: §§ 600.10(b) and (c), 600.11, 600.12, 600.13, and 610.53 of this chapter. Failure of such manufacturer to maintain such procedures, inspections, tests, or other arrangements, or failure of any person conducting such partial manufacturing to comply with applicable regulations shall constitute a ground for suspension or revocation of the authority conferred pursuant to this section on the same basis as provided in §§ 601.6 to 601.8 with respect to the suspension and the revocation of licenses.

(a) Required assessment. Except as provided in paragraphs (b), (c), and (d) of this section, each application for a new active ingredient, new indication, new dosage form, new dosing regimen, or new route of administration shall contain data that are adequate to assess the safety and effectiveness of the product for the claimed indications in all relevant pediatric subpopulations, and to support dosing and administration for each pediatric subpopulation for which the product is safe and effective. Where the course of the disease and the effects of the product are similar in adults and pediatric patients, FDA may conclude that pediatric effectiveness can be extrapolated from adequate and well-controlled effectiveness studies in adults, usually supplemented with other information in pediatric patients, such as pharmacokinetic studies. In addition, studies may not be needed in each pediatric age group, if data from one age group can be extrapolated to another. Assessments required under this section for a product that represents a meaningful therapeutic benefit over existing treatments must be carried out using appropriate formulations for the age group(s) for which the assessment is required.

(b) Deferred submission. (1) FDA may, on its own initiative or at the request of an applicant, defer submission of some or all assessments of safety and effectiveness described in paragraph (a) of this section until after licensing of the product for use in adults. Deferral may be granted if, among other reasons, the product is ready for approval in adults before studies in pediatric patients are complete, pediatric studies should be delayed until additional safety or effectiveness data have been collected. If an applicant requests deferred submission, the request must provide an adequate justification for delaying pediatric studies, a description of the planned or ongoing studies, and evidence that the studies are being or will be conducted with due diligence and at the earliest possible time.

(2) If FDA determines that there is an adequate justification for temporarily delaying the submission of assessments of pediatric safety and effectiveness, the product may be licensed for use in adults subject to the requirement that the applicant submit the required assessments within a specified time.

(c) Waivers—(1) General. FDA may grant a full or partial waiver of the requirements of paragraph (a) of this section on its own initiative or at the request of an applicant. A request for a waiver must provide an adequate justification.

(2) Full waiver. An applicant may request a waiver of the requirements of paragraph (a) of this section if the applicant certifies that:

(i) The product does not represent a meaningful therapeutic benefit over existing therapies for pediatric patients and is not likely to be used in a substantial number of pediatric patients;

(ii) Necessary studies are impossible or highly impractical because, e.g., the number of such patients is so small or geographically dispersed; or

(iii) There is evidence strongly suggesting that the product would be ineffective or unsafe in all pediatric age groups.

(3) Partial waiver. An applicant may request a waiver of the requirements of paragraph (a) of this section with respect to a specified pediatric age group, if the applicant certifies that:

(i) The product does not represent a meaningful therapeutic benefit over existing therapies for pediatric patients in that age group, and is not likely to be used in a substantial number of patients in that age group;

(ii) Necessary studies are impossible or highly impractical because, e.g., the number of patients in that age group is so small or geographically dispersed;

(iii) There is evidence strongly suggesting that the product would be ineffective or unsafe in that age group; or

(iv) The applicant can demonstrate that reasonable attempts to produce a pediatric formulation necessary for that age group have failed.

(4) FDA action on waiver. FDA shall grant a full or partial waiver, as appropriate, if the agency finds that there is a reasonable basis on which to conclude that one or more of the grounds for waiver specified in paragraphs (c)(2) or (c)(3) of this section have been met. If a waiver is granted on the ground that it is not possible to develop a pediatric formulation, the waiver will cover only those pediatric age groups requiring that formulation. If a waiver is granted because there is evidence that the product would be ineffective or unsafe in pediatric populations, this information will be included in the product's labeling.

(5) Definition of “meaningful therapeutic benefit”. For purposes of this section, a product will be considered to offer a meaningful therapeutic benefit over existing therapies if FDA estimates that:

(i) If approved, the product would represent a significant improvement in the treatment, diagnosis, or prevention of a disease, compared to marketed products adequately labeled for that use in the relevant pediatric population. Examples of how improvement might be demonstrated include, e.g., evidence of increased effectiveness in treatment, prevention, or diagnosis of disease; elimination or substantial reduction of a treatment-limiting drug reaction; documented enhancement of compliance; or evidence of safety and effectiveness in a new subpopulation; or

(ii) The product is in a class of products or for an indication for which there is a need for additional therapeutic options.

(d) Exemption for orphan drugs. This section does not apply to any product for an indication or indications for which orphan designation has been granted under part 316, subpart C, of this chapter.

Sponsors of licensed biological products shall submit the following information each year within 60 days of the anniversary date of approval of each product under the license to the Director, Center for Biologics Evaluation and Research or the Director, Center for Drug Evaluation and Research (see mailing addresses in § 600.2(a) or (b) of this chapter):

(a) Summary. A brief summary stating whether labeling supplements for pediatric use have been submitted and whether new studies in the pediatric population to support appropriate labeling for the pediatric population have been initiated. Where possible, an estimate of patient exposure to the drug product, with special reference to the pediatric population (neonates, infants, children, and adolescents) shall be provided, including dosage form.

(b) Clinical data. Analysis of available safety and efficacy data in the pediatric population and changes proposed in the labeling based on this information. An assessment of data needed to ensure appropriate labeling for the pediatric population shall be included.

(c) Status reports. A statement on the current status of any postmarketing studies in the pediatric population performed by, or on behalf of, the applicant. The statement shall include whether postmarketing clinical studies in pediatric populations were required or agreed to, and, if so, the status of these studies shall be reported to FDA in annual progress reports of postmarketing studies under § 601.70 rather than under this section.

(a) FDA has made available guidance documents under § 10.115 of this chapter to help you comply with certain requirements of this part.

(b) The Center for Biologics Evaluation and Research (CBER) maintains a list of guidance documents that apply to the center's regulations. The lists are maintained on the Internet and are published annually in the Federal Register. You may request a copy of the CBER list from the Food and Drug Administration, Center for Biologics Evaluation and Research, Office of Communication, Outreach and Development, 10903 New Hampshire Ave., Bldg. 71, Rm. 3103, Silver Spring, MD 20993-0002.