(a) In general. Section 4218 imposes tax in respect of certain uses of articles by the actual manufacturer, producer, or importer thereof. This section also applies in respect of the use of articles by any other person who, pursuant to a provision of Chapter 32 of the Code, is considered to be, or is treated as, the manufacturer or producer of the articles. See, for example, section 4223 relating to articles purchased tax free for use in further manufacture.

(b) Taxable articles in general—(1) Application of tax. If the manufacturer, producer, or importer of an article taxable under Chapter 32 of the Code (other than an article referred to in paragraph (a), (d), or (e) of this section) uses the article for any purpose other than that indicated in subparagraph (3) or (4) of this paragraph, he shall be liable for tax with respect to the use of such article in the same manner as if the article were sold by him.

(2) Taxable use in manufacture of nontaxable articles—(i) In general. In the case of an article to which subparagraph (1) of this paragraph applies, tax attaches when the manufacturer, producer, or importer of the article uses it as material in the manufacture or production of, or as a component part of, another article which is not taxable under Chapter 32 of the Code, regardless of the disposition made of such other article. (See paragraph (c) of § 48.4218-5 for computation of tax on such use.)

(ii) Types of use in manufacture of nontaxable articles. Taxable use may consist of the incorporation of a taxable article, such as an electric light bulb, into a nontaxable article, such as a flashlight. Taxable use may also result from the combining of a taxable article (or the components thereof) with a nontaxable article (or the components of a nontaxable article) resulting in a combination end article which itself is not taxable. Although the taxable article may not be a completely separable unit, within the contemplation of the law a taxable article has been produced and incorporated in the combination end article. The following are examples of taxable articles so used:

(a) Household type electric or gas clothes drier incorporated in a combination washer-drier.

(b) Household type electric, gas, or oil cooking range combined either with a range using other means of heating or with a nontaxable space heater.

(c) Taxable radio receiving set incorporated in a combination radio receiver-transmitter or in a combination radio receiver-intercommunication system.

(3) Nontaxable use in manufacture of taxable articles. The tax on the use of an article to which subparagraph (1) of this paragraph has application shall not apply if the article is used by the manufacturer, producer, or importer thereof as material in the manufacture or production of, or as a component part of, another article taxable under Chapter 32 to be manufactured or produced by him. It is immaterial what disposition is made of such other article.

(4) Gasoline. The tax on the use of an article shall not apply in the case of gasoline used on or after October 1, 1961, by any person, for nonfuel purposes, as a material in the manufacture or production of another article to be manufactured or produced by him. See section 4221 and the regulations thereunder contained in subpart N. For provisions applicable to use of gasoline by a producer or importer otherwise than in the production of other gasoline, or special motor fuel taxable under section 4041(b), see section 4082(c) and paragraph (c) of § 48.4082-1 contained in subpart H.

(c) Tires, inner tubes, and automobile radio or television receiving sets. If the manufacturer, producer, or importer of a tire or inner tube taxable under section 4071 (other than a bicycle tire or inner tube referred to in paragraph (e) of this section), or an automobile radio or television receiving set taxable under section 4141, sells such article on or in connection with the sale of any other article or uses it for any purpose, he shall be liable for tax with respect to such tire, inner tube, or radio or television receiving set in the same manner as if it were sold by him as a separate article. However, tax does not apply where the manufacturer, producer, or importer of the tire, inner tube, or automobile radio or television receiving set sells such article on or in connection with the sale of another article manufactured by him for any of the exempt purposes specified in paragraphs (2) to (5), inclusive, of section 4221(a) and the regulations thereunder contained in subpart N.

(d) Automobile parts or accessories, radio or television components, and camera lenses—(1) Application of tax. If the manufacturer, producer, or importer of an automobile part or accessory taxable under section 4061(b), a radio or television component taxable under section 4141, or a camera lens taxable under section 4171, uses the article for any purpose other than that indicated in subparagraph (2) of this paragraph, he shall be liable for tax with respect to the use of the article in the same manner as if the article were sold by him. For example, tax applies if the manufacturer, producer, or importer uses the article referred to in this subparagraph for repair or replacement purposes in connection with equipment used by him in the operation of his business.

(2) Nontaxable use in manufacture of other articles. The tax on the use of an article referred to in subparagraph (1) of this paragraph shall not apply if the article is used by the manufacturer, producer, or importer thereof as material in the manufacture or production of, or as a component part of, any other article (whether or not taxable under Chapter 32) to be manufactured or produced by him. It is immaterial what disposition is made of such other article.

(e) Bicycle tires and inner tubes—(1) Application of tax. If the manufacturer, producer, or importer of a bicycle tire as defined in section 4221(e)(4)(B) or an inner tube for such a tire uses the tire or inner tube for any purpose other than as indicated in subparagraph (2) of this paragraph, he shall be liable for tax with respect to the use of the tire or inner tube in the same manner as if the article were sold by him.

(2) Nontaxable use in manufacture of other articles. The tax on the use of a bicycle tire or inner tube referred to in subparagraph (1) of this paragraph shall not apply if the tire or inner tube is used by the manufacturer, producer, or importer thereof as material in the manufacture or production of, or as a component part of, a new bicycle to be manufactured or produced by him. It is immaterial what disposition is made of the new bicycle. Tax, however, applies in the case of the use of a bicycle tire or inner tube by the manufacturer, producer, or importer thereof in the rebuilding or reconditioning of a used bicycle.

(3) Effective date. The provisions of this paragraph shall apply to the use on or after May 1, 1960, of a bicycle tire or inner tube by the manufacturer, producer, or importer thereof. Liability for tax on the use prior to that date of a bicycle tire or inner tube by the manufacturer, producer, or importer thereof shall be based on the provisions of paragraph (c) of this section which apply to tires and inner tubes in general.

(f) Use after lease. If the manufacturer, producer, or importer of a taxable article leases such article and thereafter uses the article, he incurs liability for tax on such use as provided in these regulations to the same extent as if the article were sold after being leased. See section 4217 and the regulations thereunder in this subpart for application and computation of tax in case of leased articles.

(g) Time of application of tax. In the case of a taxable use of an article by the manufacturer, producer, or importer thereof, the tax attaches at the time such use begins. If tax applies by reason of the sale of an article by the manufacturer, producer, or importer thereof on or in connection with his sale of another article, the tax attaches at the time of the sale of such other article.

(h) Exemptions because of other statutory provisions. Tax does not apply on the use of an article by the manufacturer, producer, or importer thereof if under the applicable provisions of the Code the sale of the article for a similar use would not be subject to tax. For example, the use of gasoline by the producer thereof to propel tankers engaged in foreign trade which are owned or leased by the producer would not be subject to tax under section 4218 since a sale for such use would be exempt from tax as provided in section 4221(a)(3). Also, tax need not be paid with respect to the use of an article by the manufacturer, producer, or importer thereof if such use would qualify, under the provisions of section 6416(b), for credit or refund of the tax paid.

(a) Business use. Section 4218 applies to the use by a person, in the operation of any business in which he is engaged, of a taxable article which has been manufactured, produced, or imported by him or his agent. For example, a person engaged in the operation of a dairy business incurs liability for tax with respect to a truck body manufactured by him and used in the operation of his dairy business.

(b) Personal use. The tax on use of a taxable article does not attach in cases where an individual incidentally manufactures, produces, or imports a taxable article for his personal use or causes a taxable article to be manufactured, produced, or imported for his personal use.

Liability for tax incurred on the use of an article is not extinguished or reduced because of any subsequent sale or lease of the article even if such sale or lease would have been exempt if the article had been so sold or leased prior to use. If a manufacturer, producer, or importer of an article incurs liability for tax on his use thereof, and thereafter sells or leases the article in a transaction which otherwise would be subject to tax, liability for tax is not incurred on such sale or lease.

For purposes of section 4218 and § 48.4218-1, an article is used as material in the manufacture or production of, or as a component part of, another article, if it is incorporated in, or is a part or accessory of, the other article. Lubricating oil in the crankcase of a new truck is an example of a taxable article use as material in the manufacture or production of, or as a component part of, another article. In addition, an article (other than gasoline used as a fuel) is considered to be used as material in the manufacture of another article if it is partly or entirely consumed in testing such other article; for example, shells or cartridges used in testing new firearms. similarly, if an article is partly or wholly consumed in quality testing a production run of like articles (as, for example, an automotive part destroyed in stress testing) such article is also considered to have been used as material in the manufacture of another article. However, if a taxable article that has been used tax free and only partly consumed in testing is later sold, or put to a taxable use, by the manufacturer, tax attaches to such sale or use. An article that is consumed in the manufacturing process other than in testing, so that it is not a physical part of the manufactured article, is not used as material in the manufacture or production of, or as a component part of, such other article. Thus, lubricating oil consumed in operating plant machinery in the course of the manufacture of automobile truck chassis is not used as material in the manufacture or production of, or as a component part of, the truck chassis.

(a) Tax based on price. Except as provided in paragraph (d) of this section, tax liability incurred on the use of an article shall be computed on the price at which such or similar articles are sold in the ordinary course of trade by manufacturers, producers, or importers thereof and in the absence of special arrangements. For additional provisions applicable in computing the tax in the case of the use of an article by a manufacturer and producer who purchased the article free of tax under section 4221(a)(1) for use by him in further manufacture, see section 423(b) and the regulations thereunder.

(b) Articles regularly sold by manufacturer. If the manufacturer, producer, or importer of an article regularly sells such articles at wholesale in arm's length transactions, tax liability on his use of any such article shall be computed on his lowest established wholesale price for such articles in effect at the time of the taxable use. In establishing such price, there shall be included and excluded, as applicable, the charges and readjustments specified in sections 4216(a), 4216(f), and 6416(b)(1), as in effect at the time tax liability on the use of the article is incurred, and the regulations thereunder contained in this subpart and subpart O. If the manufacturer, producer, or importer of an article does not regularly sell such articles at wholesale in arm's length transactions, a constructive price on which the use tax shall be computed will be determined by the Commissioner. This price will be established after considering the selling practices and price structures of manufacturers, producers, and importers of similar articles.

(c) Articles governed by section 4218(a) used in manufacture of nontaxable combination articles. If the manufacturer, producer, or importer of an article to which section 4218(a) applies does not regularly sell such article separately but uses it as material in the manufacture or production of, or as a component part of, a nontaxable combination article consisting of a taxable and nontaxable article, liability for tax on his use shall be computed on the constructive price of the taxable article at the time of use. To determine the constructive price of the taxable article in such case, the combination article is considered to be composed of (1) parts used exclusively in the functioning of the taxable article in the combination, (2) parts used exclusively in the functioning of the nontaxable article in the combination, and (3) parts, called common parts, which serve a dual function in connection with the parts in both subparagraphs (1) and (2) of this paragraph. The ratio which the cost of the parts in subparagraph (1) of this paragraph bears to the sum of the cost of such parts and the parts in subparagraph (2) of this paragraph is applied to the lowest established wholesale price for which like combination articles are at the time of the taxable use being sold by the manufacturer or producer in the ordinary course of trade. The resulting amount is the constructive sale price for the taxable article on which tax is to be computed. The cost of the common parts is allocable to the parts in subparagraphs (1) and (2) of this paragraph in the same ratio, and, therefore, need not be taken into account in the computation since the inclusion and allocation of the cost of such parts in the determination would not result in a different ratio. In determining the lowest established wholesale price for the combination article, there shall be included and excluded, as applicable, the charges and readjustments specified in sections 4216(a), 4216(f), and 6416(b)(1), as in effect at the time tax liability on the use of the taxable article is incurred, and the regulations thereunder contained in this subpart and subpart O of this part. The tax applicable to the use of the article for which a constructive sale price has been computed is not affected by any charges or readjustments of the price for which the nontaxable combination article is sold, whether by reason of the return or repossession of the nontaxable article or its covering or container, or by a bona fide discount, rebate, allowance, or other factor. The application of this subparagraph may be illustrated by the following example:

(d) Tax based on weight or volume. Where liability for tax is incurred on the use of an article subject, if sold, to a tax based on:

(1) The weight of the article (such as a tire), or

(2) The volume of the article (such as gasoline or lubricating oil),

(a) In general. The “price” for which an article is sold includes the total consideration paid for the article, whether that consideration is in the form of money, services, or other things. See § 48.0-2 (a) (5). However, for purposes of the taxes imposed under Chapter 32 certain collateral charges made in connection with the sale of a taxable article must be included in the taxable sale price, whereas others may be excluded. Any charge which is required by a manufacturer, producer, or importer to be paid as a condition of its sale of a taxable article and which is not attributable to an expense falling within one of the exclusions provided in section 4216 or the regulations thereunder is includible in the taxable sale price. It is immaterial for this purpose that the charge may be paid to a person other than the manufacturer, producer, or importer, or that it may be separately billed to the purchaser as a charge earmarked for expenses incurred or to be incurred in his behalf, such as charges for demonstration or display of the article, for sales promotion programs, or otherwise. With respect to the rules relating to exclusion (in the case of sales after December 31, 1960) of charges for local advertising of a manufacturer's products, see section 4216(e) and § 48.4216(e)-1. In the case of sales on credit, a carrying, finance, or service charge is excludable from the sale price if it is reasonably related to the costs of carrying the deferred portion of the sale price (such as interest on the deferred portion of the sale price, expenses of bookkeeping necessary to keep the records of such sales, and expenses of correspondence and other communication in connection with collection).

(b) Tools and dies. Separate charges for tools and dies used in the manufacture or production of a taxable article are to be included, in whole or in part, in the sale price on which the tax is based. It is immaterial whether the charges for such items are billed in a lump sum or are amortized or allocated to each of the taxable articles. If, at the termination of a contract to manufacture taxable articles, the tools and dies used in production pass to the purchaser, only the amount of depreciation of the tools and dies incurred in production, computed on a “production output” basis, should be included in the sale price. If the purchaser furnishes the tools and dies, the amount of the cost thereof, to the extent that such cost has been depreciated in the production of the taxable articles (computed on a “production output” basis), shall be included in determining the sale price of the articles for purposes of computing the tax. This paragraph applies to sales by manufacturers after May 5, 1974.

(c) Charges for warranty. A charge for a warranty of an article which the manufacturer, producer, or importer requires the purchaser to pay in order to obtain the article shall be included in the sale price of the article on which the tax is computed. On the other hand, a charge for a warranty of a taxable article paid at the purchaser's option shall not be included in the sale price for purposes of computing tax thereon.

(d) Charges for coverings, containers, and packing. Any charge by the manufacturer, producer, or importer for coverings and containers of whatever nature used to pack an article for shipment shall be included as part of the sale price for the purpose of computing the tax, whether or not the charges are identified as such on the invoice or are billed separately. Even though there is an agreement that the manufacturer, producer, or importer will repay all or a portion of the charge for the coverings or containers upon the return thereof, the full charge nevertheless shall be included in the sale price. It is immaterial whether the charge made at the time of sale is more or less than the actual value of the covering or container. See paragraph (b)(4) of § 48.6416(b)-1 for provisions relating to the claiming of a credit or refund in the case of a price readjustment due to the return or repossession of a covering or container. Packing charges are to be included in the sale price whether the charges cover normal packing or special packing services, such as for extra protection of the article or for odd-lot quantities. This rule shall apply whether the packing services are initiated by the manufacturer, producer, or importer or are furnished at the request of the purchaser and whether the packing is performed by the manufacturer, producer, or importer or by another person at his request. If the purchaser supplies packing materials, the fair market value of such materials must be included in the tax base when computing tax liability on the sale of the article.

(e) Taxable and nontaxable articles sold as a unit. Where a taxable article and a nontaxable article are sold by the manufacturer as a unit, the tax attaches to that portion of the manufacturer's sale price of the unit which is properly allocable to the taxable article. For example, where a fishing reel (an article subject to tax under section 4161(a)) is equipped with a fishing line (a nontaxable article) and the reel and line are sold as a unit, the tax imposed by section 4161(a) applies only to that portion of the manufacturer's sale price of the unit which is properly allocable to the fishing reel. Normally, the taxable portion of such a unit may be determined by applying to the manufacturer's sale price of the unit the ratio which the manufacturer's separate sale price of the taxable article bears to the sum of the sale prices of both the taxable and nontaxable articles, if such articles are sold separately by the manufacturer. Where the articles (or either one of them) are not sold separately by the manufacturer and do not have established sale prices, the taxable portion is to be determined from a comparison of the actual costs of the articles to the manufacturer. Thus, if the cost of the taxable article represents four-fifths of the total cost of the complete unit, the tax applies to four-fifths of the price charged by the manufacturer for the unit.

(a) Tax—(1) Tax not part of taxable sale price. The tax imposed by Chapter 32 of the Code on the sale of an article is not part of the taxable sale price of the article. Thus, if a manufacturer computes the tax on a sale price which is determined without regard to the tax, and it charges the proper tax as a separate item, the amount of tax so charged does not become a part of the taxable sale price and no tax is due on the tax so charged. Where no separate charge is made as tax, it will be presumed that the price charged to the purchaser for the article includes the proper tax, and the proper percentage of such price will be allocated to the tax.

(2) Computation of tax. If an article subject to tax at the rate of 10 percent is sold for $100 and an additional item of $10 is billed as tax, $100 is the taxable selling price and $10 is the amount of tax due thereon. However, if the article is sold for $100 with no separate billing or indication of the amount of the tax, it will be presumed that the tax is included in the $100, and a computation will be necessary to determine what portion of the total amount represents the sale price of the article and what portion represents the tax. The computation is as follows:

(b) Transportation, delivery, insurance, or installation charges—(1) Charges incurred pursuant to sale. Charges for transportation, delivery, insurance, installation, and other expenses actually incurred in connection with the delivery of an article to a purchaser pursuant to a bona fide sale shall be excluded from the sale price in computing the tax. Such charges include all items of transportation, delivery, insurance, installation, and similar expense incurred after shipment to a customer begins, in response to the customer's order, pursuant to a bona fide sale. However, costs of such nature incurred by a manufacturer, producer, or importer in transporting, in the normal course of business and for its benefit and convenience, articles from a factory or port of entry to a warehouse or other facility (regardless of the location of such warehouse or facility) are not considered as being incurred in connection with the delivery of an article to a purchaser pursuant to a bona find sale, and charges therefor cannot be excluded from the sale price in computing tax liability. Similarly, an allowance granted by a manufacturer as reimbursement for expenses incurred by the purchaser in shipping used articles to the manufacturer for credit against the purchase price of taxable articles shall not be excluded from the sale price when computing tax due on the sale of the taxable articles. In any event, no charge may be excluded from the sale price unless the conditions set forth in subparagraph (2) of this paragraph are complied with. Said conditions are prescribed under the authority granted the Secretary or his delegate in section 4216(a).

(2) Only actual expenses to be excluded. Where a separate charge is made for transportation or other expenses incurred in connection with the delivery of an article to the purchaser pursuant to a bona fide sale, there shall be excluded in arriving at the sale price subject to tax only that portion of the charge which represents the actual expenses incurred for the transportation or other excludible expenses. Where a separate charge is less than the actual expense, the difference is presumed to be included in the billed price. Such difference, together with the separate charge, shall be excluded in arriving at the sale price on which the tax is computed. Similarly, where no separate charge is made but the manufacturer, producer, or importer incurs an expense of the type to which this paragraph has application, the amount of such expense actually incurred shall be excluded from the sale price on which the tax is computed. Where transportation expense is incurred in conjunction with a shipment composed of both taxable and nontaxable articles, only the portion of the expense allocable to the taxable articles shall be excludible. In general, unless the taxpayer establishes to the satisfaction of the district director that another method reasonably apportions such freight expense between taxable and nontaxable articles, such expense should be apportioned on the basis of the relative weights (or, if available, the relative published tariff rates applicable to) the taxable and nontaxable articles. Where it is not feasible to apportion such expense on the basis of relative weights or tariff rates, the expense shall be apportioned on another reasonable basis; for example, in the case of a shipment including both taxable and nontaxable automotive parts which are subject to the same tariff rate, it may be appropriate to apportion the transportation expense on the basis of the relative sale prices. A charge for insurance in connection with the delivery of an article to a purchaser is considered to represent an expense actually incurred only to the extent that an amount equivalent to such charge is paid or payable by the manufacturer to a person authorized to assume such insurance risk.

(3) Transportation, delivery, or installation services performed by manufacturer. For purposes of computing the taxable sale price of articles, it is immaterial whether the transportation, delivery, or other services of the type to which this paragraph has application are performed by a common carrier or independent agency for or on behalf of the manufacturer, producer, or importer, or are performed by the manufacturer, producer, or importer with the use of its own vehicles or other facilities. Thus, where a manufacturer, producer, or importer performs the transportation, delivery, or other services with its equipment, tools, employees, etc., the cost of such services allocable to the sale of the taxable article shall be excluded. In determining whether an expense is an excludible transportation or delivery expense, only those expenses incurred by reason of the fact that the purchaser accepts delivery at some point other than the manufacturer's place of business shall be considered excludible transportation or delivery expenses. All expenses incurred in placing an article packed, ready for shipment on the loading dock at the manufacturer's factory are not excludible transportation or delivery expenses. An allowance granted by the manufacturer, producer, or importer to the purchaser for transportation, delivery, or other expenses incurred or to be incurred by the purchaser in connection with the sale shall be excluded in computing the taxable sale price, if charges for similar expenses would be excludible if incurred by the manufacturer.

(4) Records in support of exclusion. Every manufacturer, producer, or importer making sales of taxable articles shall keep records which will disclose the amount of transportation, delivery, insurance, installation or other expense actually incurred by it in connection with the delivery of a taxable article to a purchaser pursuant to a bona fide sale.

(c) Other charges. A charge or expense not within the scope of paragraph (a) or (b) of this section, whether or not separately stated, may not be excluded in computing the taxable sale price unless it can be shown by adequate records that the charge or expense properly is not to be included as a manufacturing or selling expense or is in no way incidental to placing the article in condition packed ready for shipment. Commissions to manufacturers' agents, or allowances, payments, or adjustments made to, and for the benefit of, persons other than the purchaser may not be excluded or deducted, under any condition, in computing the sale price upon which the tax is computed.

(a) Exchanges. If, in connection with the sale of an article subject to a tax imposed under Chapter 32 on the price for which sold, a manufacturer receives from its vendee another article in exchange, the tax on the manufacturer's sale shall be computed on the basis of the amount allowed for the article received from the vendee, plus any additional amount charged the vendee.

(b) Replacements under warranty. If an article, subject to a tax imposed under Chapter 32 on the price for which sold, is returned to the manufacturer by reason of the failure of the article under a warranty as to its quality or service, and a new article is given by the manufacturer, free, or at a reduced price, the tax on the new article shall be computed on the actual amount, if any, to be paid to the manufacturer for the new article. See paragraph (b)(2) of § 48.6416(b)-1 for the circumstances under which the allowance made by the manufacturer, producer, or importer upon the return of the first article constitutes a price readjustment of the sale price of first article and the extent, if any, to which a credit may be allowed, or refund made, of the tax paid by the manufacturer, producer, or importer on the sale of the first article.

(c) Readjustments in sale price. Readjustment in sale price (such as allowable discounts, rebates, bonuses, etc.) cannot be anticipated. The tax must be based upon the original price unless the readjustments have actually been made prior to the close of the period for which the tax upon the sale is returned. However, if the price upon which the tax was computed is subsequently readjusted, credit may be taken against the tax due on a subsequent return or a claim for refund filed as provided by section 6416(b)(1) and the regulations thereunder.

(a) In general. Section 4216(b) pertains to those taxes imposed under Chapter 32 that are based on the price for which an article is sold, and contains the provisions for constructing a tax base other than the actual sale price of the article, under certain defined conditions.

(b) Specific applications. (1) Section 4216(b)(1) applies to:

(i) Arm's-length sales at retail or on consignment, other than those sales at retail and to retailers to which section 4216(b)(2) and § 48.4216(b)-3 apply; and

(ii) Sales otherwise than at arm's length, and at less than fair market price.

(2) Section 4216(b)(2) applies generally to arm's-length sales of an article at retail or to retailers, or both, where the manufacturer also sells the same article to wholesale distributors.

(3) Section 4216(b)(3) provides a formula for determining a constructive sale price for sales of taxable articles between members of an affiliated group of corporations (as “affiliated group” is defined in section 1504(a)) in those instances where the purchasing corporation regularly resells to retailers but does not regularly resell to wholesale distributors, and except for situations where section 4216(b) (4) or (5) applies.

(4) Section 4216(b)(4) provides a special method for computing a constructive sale price for sales of taxable articles between affiliated corporations where the purchasing corporation sells only to retailers, and the normal method of selling within the industry is for manufacturers to sell to wholesale distributors.

(5) Section 4216(b)(5) provides a special method for computing a constructive sale price for sales of articles subject to a tax imposed by section 4061(a) (trucks, buses, tractors, etc.) between affiliated corporations, where the purchasing corporation regularly sells such articles in arm's-length transactions to independent retailers.

(c) Definitions. For purposes of section 4216(b) and the regulations thereunder and unless otherwise indicated:

(1) Sale at retail. A “sale at retail,” or a “retail sale”, is a sale of an article to a purchaser who intends to use or lease the article rather than resell it. The fact that articles are sold in wholesale lots, or at wholesale prices, will not change the character of such sales as “sales at retail” if the purchaser is not engaged in the business of reselling such articles, and acquires them for the purpose of using them rather than reselling them.

(2) Retail dealers. A “retail dealer”, or “retailer”, is a person engaged in the business of selling articles at retail.

(3) Wholesale distributor. The term “wholesale distributor” means a person engaged in the business of selling articles to persons engaged in the business of reselling such articles.

(a) In general. Section 4216(b)(1) sets forth the conditions that require the Secretary to construct a sale price on which to compute a tax imposed under Chapter 32 on the price for which an article is sold. The section requires a constructive sale price to be established where a taxable article is (1) sold at retail, (2) sold while on consignment, or (3) sold otherwise than through an arm's-length transaction at less than fair market price. See § 48.4216 (b)-2 (c) for the treatment of articles taxable under section 4061(a).

(b) Sales at retail. Section 4216(b)(1)(A) relates to the determination of a constructive sale price for sales of taxable articles sold at arm's length and at retail. In the case of such sales, the constructive sale price is the highest price for which such articles are sold to wholesale distributors, in the ordinary course of trade, by manufacturers or producers thereof, as determined by the Secretary. If the constructive sale price is less than the actual sale price, the constructive sale price shall be used as the tax base. If the constructive sale price is not less than the actual sale price, the actual sale price shall be considered as not less than fair market, and shall be used as the tax base. In determining the highest price for which articles are sold by manufacturers to wholesale distributors, there must be taken into consideration the normal industry practices with respect to section 4216 (a) and (f) inclusions and exclusions. However, once a constructive sale price has been determined by the Secretary or his delegate, no further adjustment of such price shall be made. The provisions of section 4216(b)(1)(A) and this paragraph shall not apply in those instances where the provisions of section 4216(b)(2) and § 48.4216(b)-3 apply.

(c) Sales of articles taxable under section 4061(a). With respect to sales made after December 31, 1978, in the case of an article the sale of which is taxable under section 4061(a) and which is sold at retail, the tax under this chapter shall be computed on a percentage (as determined by the Secretary but not greater than 100 percent) of the actual selling price based on the highest price for which such articles are sold by manufacturers and producers in the ordinary course of trade. The constructive sale price under this section shall be determined without regard to any individual manufacturer's or producer's cost.

(d) Sales on consignment. As in the case of sales at retail, the constructive sale price for sales on consignment shall be the price for which such articles are sold, in the ordinary course of trade, by manufacturers or producers thereof, as determined by the Secretary or his delegate. For purposes of section 4216(b)(1)(B) and this paragraph, an article is considered to be sold on consignment if it is sold while it is on consignment to a person which has the right to sell, and does sell, such article in its own name, but never receives title to the article from the manufacturer. Ordinarily, the constructive sale price of an article sold on consignment is the net price received by the manufacturer from the consignee. The provisions of section 4216(b)(1)(B) and this paragraph shall not apply if the provisions of section 4216(b)(2) and § 48.4216(b)-3 apply.

(e) Sales not at arm's length. For purposes of section 4216(b)(1)(C) and this paragraph, a sale is considered to be made under circumstances otherwise than at “arm's length” if:

(1) One of the parties is controlled (in law or in fact) by the other, or there is common control, whether or not such control is actually exercised to influence the sale price, or

(2) The sale is made pursuant to special arrangements between a manufacturer and a purchaser.

(a) In general. Section 4216 (b)(2) provides a special rule under which a manufacturer shall determine a constructive sale price for his sales of taxable articles at retail, and to retail dealers, under certain conditions. The rule is applicable where:

(1) The manufacturer regularly sells such articles at retail, or to retailers, or both, as the case may be,

(2) The manufacturer also regularly sells such articles to one or more wholesale distributors in arm's-length transactions, and the manufacturer establishes that its prices in such cases are determined without regard to any benefit to be derived under section 4216(b)(2),

(3) The transactions are arm's-length transactions, and

(4) With respect to articles to which the tax imposed by section 4061(a) applies (relating to trucks, buses, tractors, etc.), the normal method of sales for such articles within the industry is not to sell such articles at retail or to retailers, or combinations thereof.

(b) Definitions. For purposes of section 4216(b)(2) and this section:

(1) Actual sale price. “Actual sale price” means the actual selling price of an article determined in the same manner as sale price is determined for a taxable sale. Accordingly, such price must reflect the inclusions and exclusions set forth in sections 4216 (a) and (f), and any price adjustments described in section 6416(b)(1).

(2) Highest price to wholesale distributors. The “highest price” charged wholesale distributors for an article by a manufacturer, producer, or importer thereof, is the highest price at which the manufacturer, producer, or importer sells the article to wholesale distributors, determined without regard to quantity. Such price shall be determined in the same manner as sale price is determined for a taxable sale with respect to sections 4216 (a) and (f) inclusions and exclusions; however, since the price is to be a “highest” price, no further adjustment may be made for price readjustments under section 6416(b)(1).

(3) Regular sales. An article is considered to sold “regularly” at retail or to retailers if sales are made at retail or to retailers periodically and recurringly as a regular part of the seller's business. If a seller makes only isolated or casual sales of an article at retail or to retailers, it is not considered to be selling “regularly” at retail or to retailers. Similarly, a manufacturer is considered to be making regular sales for an article to one or more distributors if it sells the article to at least one distributor periodically and recurringly as a regular part of its business.

(4) Normal method of sales in industry. In the absence of a showing to the Commissioner of Internal Revenue of a more appropriate manner of determining the normal method of sales within an industry which is practical in application, the normal method of sales within an industry shall be regarded as not being at retail or to retailers, or both, if the industry dollar volume of sales which are at retail or to retailers, or both, is less than half the total industry dollar volume of sales at all levels of distribution by manufacturers, producers, or importers, including sales to other manufacturers, producers, or importers.

(5) Industry. Each of the following categories of articles upon which tax is imposed by section 4061(a) constitutes a separate “industry”:

(i) Taxable automobile trucks (consisting of automobile truck bodies and chassis);

(ii) Taxable automobile buses (consisting of automobile bus bodies and chassis);

(iii) Taxable truck and bus trailers and semitrailers (consisting of chassis and bodies of such trailers and semi-trailers); and

(iv) Taxable tractors of the kind chiefly used for highway transportation in combination with a trailer or semi-trailer.

(6) Application of section 4216(b)(2) to certain sales before June 22, 1965. In the case of sales before June 22, 1965, of articles then taxable under section 4121 (relating to electric, gas, and oil appliances), section 4216(b)(2) also applied in the case of a sale of such an article to a special dealer. The applicability of section 4216(b)(2) to such a sale may be determined by inserting “or to a special dealer” following “or to a retailer” in so much of section 4216(b)(2) as precedes subparagraph (A); by inserting “or to special dealers” following “retailers” in section 4216(b)(2)(A); and by inserting “(other than special dealers)” after “wholesale distributors” in section 4216(b)(2)(B) and so much of section 4216(b)(2) as follows section 4216(b)(2)(D). A “special dealer” was a distributor of articles taxable under section 4121 who did not maintain a sales force to resell the article whose constructive sale price was established under section 4216(b)(2) but relied on salesmen of the manufacturer, producer, or importer of the article. In the case of sales before June 22, 1965, of articles taxable under section 4191 (relating to business machines) or section 4211 (relating to matches), section 4216(b)(2) was applicable in the same manner as in the case of articles taxable under section 4061(a). With respect to sales after September 30, 1972, section 4216(b)(2)(C) applied only to articles taxable under section 4061(a), 4191, or 4211. Section 4216(b)(2)(C) was applicable to sales before October 1, 1962, of all articles subject to tax under Chapter 32.

(a) In general. Sections 4216(b) (3), (4), and (5) establish procedures for determining a constructive sale price under section 4216(b)(1)(C) for sales between corporations that are members of the same “affiliated group”, as that term is defined in section 1504(a).

(b) Sales to which section 4216(b)(3) applies. Section 4216(b)(3), which applies to articles sold after December 31, 1969, provides a procedure for determining a constructive sale price under section 4216(b)(1)(C) in those instances where:

(1) A manufacturer, producer or importer regularly sells a taxable article (other than an article subject to a tax imposed by section 4061(a) (trucks, buses, etc.)) to a wholesale distributor which is a member of the same affiliated group as the manufacturer, producer or importer, and

(2) The wholesale distributor regularly sells such article to one or more independent retailers, but does not regularly sell to wholesale distributors.

(c) Sales to which section 4216(b)(4) applies. Section 4216(b)(4), which applies to articles sold after December 31, 1969, provides a procedure for determining a constructive sale price under section 4216(b)(1)(C) in those instances where:

(1) A manufacturer, producer, or importer regularly sells (except for tax-free sales) a taxable article only to a wholesale distributor which is a member of the same affiliated group as the manufacturer, producer, or importer,

(2) The distributor regularly sells (except for tax-free sales) such article only to retail dealers, and

(3) The normal method of sales for such articles within the industry is to sell such articles in arm's-length transactions to wholesale distributors.

(i) The difference between the median price for which comparable articles are sold to wholesale distributors, in the ordinary course of trade, by manufacturers of producers thereof, and the median price at which such wholesale distributors in arm's-length transactions sell such comparable articles to retailers, is of

(ii) The median price at which such wholesale distributors in arm's-length transactions sell such comparable articles to retailers.

(d) Application of section 4216(b)(4). The application of section 4216(b)(4) and paragraph (c) of this section may be illustrated by the following example:

(e) Sales to which section 4216(b)(5) applies. Section 4216(b)(5), which applies to articles sold after December 31, 1970, provides a procedure for determining a constructive sale price under section 4216(b)(1)(C) in those circumstances where:

(1) A manufacturer, producer, or importer of an article subject to a tax imposed by section 4061(a) (trucks, buses, etc.) regularly sells such article to a wholesale distributor that is a member of the same affiliated group of corporations as the manufacturer, producer, or importer, and

(2) Such distributor regularly sells such articles to independent retail dealers.

(f) Determination of “lowest price”. (1) In addition to other considerations, in determining a “lowest price” for purposes of section 4216(b) (1), (3), and (5) and § 48.4216(b)-4(b), and 48.4216(b)-4(e), such price shall be determined:

(i) Without requiring that a given percentage of sales be made at that price (provided that the volume of sales made at that price is great enough to indicate that those sales have not been engaged in primarily to establish a lower tax base), and

(ii) Without including any charge for a fixed amount that the purchaser has an unconditional right to recover on the basis of a contractual arrangement existing at the time of sale.

(2) For purposes of applying section 4216(b)(1) and § 48.4216(b)-2, section 4216(b)(6) and this paragraph apply to articles sold after June 30, 1962. For purposes of applying section 4216(b)(3) and paragraph (b) of this section, section 4216(b)(6) and this paragraph apply to articles sold after December 31, 1969. For purposes of applying section 4216(b)(5) and paragraph (e) of this section, section 4216(b)(6) and this paragraph apply to articles sold after December 31, 1970.

(g) Definitions. For purposes of this section and paragraphs (3), (4), and (5) of section 4216(b), the term “regularly sells” has the same meaning as that accorded the term “regular sales” in subparagraph (3) of § 48.4216(b)-3(b), and the term “normal method of sales in the industry” has the same meaning as accorded that term in subparagraph (4) of § 48.4216(b)-3(b).

(a) Leases. When a taxable article is leased by a manufacturer, producer, or importer, liability for tax is incurred, except as provided by section 4217(b) and § 48.4217-2, on each payment made with respect to such lease. Tax is payable on each lease payment as long as the article is leased by the manufacturer, producer, or importer. The tax payable with respect to each lease payment is a percentage of each payment based on the rate of tax, if any, in effect on the date the lease payment is due. If the article is subsequently sold by the manufacturer, producer, or importer, the tax applies also to such sale, without regard to the tax paid when the article was leased. For definition of the term “lease”, see paragraph (a) of § 48.4217-1(a).

(b) Installment sales. When a taxable article is sold under an installment payment contract with title reserved in the seller, or under a conditional sale contract, chattel mortgage arrangement or other arrangement creating a security interest with payments to be made in installments, tax shall be computed and paid on each payment made by the purchaser. The tax payable with each payment is a percentage of each payment based on the rate of tax, if any, in effect on the date the payment is due. The part of each payment that is subject to tax is that portion of the payment equal to the percentage of the total charge for the article that is subject to tax. For example, if the total charge for the article is $1,000, and of the total amount charged only 90 percent thereof, or $900, is subject to tax by reason of exclusions, then only 90 percent of the installment payment is subject to tax. If the tax base is a constructive sale price computed under section 4216(b) that is less than the actual sale price of the article, the portion of each payment subject to tax is the percentage of such payment equal to the percentage that the constructive sale price bears to the actual sale price. For example, if an article is sold at retail for $100, and the constructive sale price for such an article computed under the provisions of section 4216(b)(1)(A) is $75, the percentage which the constructive sale price bears to the actual sale price is 75 percent. Accordingly, only 75 percent of each installment payment is subject to tax.

(c) Sales on credit. Where articles are sold on credit under conditions other than those specified in paragraph (b) of this section, the entire tax shall be reported and paid with the return covering the period in which the sale is made, even though the price may not be paid to the manufacturer, producer, or importer until a later date, or not paid at all.

(d) Effective dates of paragraphs (a) and (b) of this section. The rules set forth in paragraphs (a) and (b) of this section are effective as of June 22, 1965. As in effect before June 22, 1965, section 4216(c) required, in the case of a transaction described in section 4216(c) (1), (2), (3), or (4), that there be paid upon each payment with respect to an article that portion of the total tax which was proportionate to the portion of the total amount to be paid represented by such payment.

(e) Contracts for the lease, installment sale, or sale on credit, of a taxable medical device—(1) General rule. Payments made on or after January 1, 2013, pursuant to a contract for the lease, installment sale, or sale on credit of a taxable medical device that was entered into on or after March 30, 2010, are subject to tax under section 4191. The provisions of sections 4216(c) and 4217, paragraphs (a), (b), and (c) of this section, and § 48.4217-2 apply.

(2) Exception for payments made on or after January 1, 2013, pursuant to written binding contracts entered into prior to March 30, 2010. Payments made on or after January 1, 2013, pursuant to a written binding contract for the lease, installment sale, or sale on credit of a taxable medical device that was in effect prior to March 30, 2010, are not subject to tax under section 4191. This exception includes payments made on or after January 1, 2013, if they are made pursuant to a written binding contract that was entered into prior to March 30, 2010. This exception does not apply to payments made under any contract that is materially modified on or after March 30, 2010. For this purpose, a material modification includes only a modification that materially affects the property to be provided under the contract, the terms of payment under the contract, or the amount payable under the contract. Notwithstanding the foregoing, a material modification does not include a modification to the contract required by applicable Federal, State, or local law.

(3) Effective/applicability date. This section applies on and after January 1, 2013.

(a) In general. Except as provided in paragraph (d) of this section, in case of a sale or other disposition by a manufacturer, producer, or importer of an installment account of the type specified in section 4216(c), the tax shall not apply to subsequent installment payments on such account. Instead, there shall be paid an amount equal to the difference between the tax previously paid on such installment account and the total tax computed by applying:

(1) To each installment due before the sale of the installment account, the rate of tax applicable at the time payment thereof was due, and

(2) To each installment, the time for payment of which has not arrived, the rate of tax which, under the provisions of Chapter 32 as in effect on the date of the sale of the installment account, is (or is to be) in effect on the date such installment is due.

(b) Sale in bankruptcy or insolvency proceeding. In the case of a sale of an installment account of a manufacturer, producer, or importer pursuant to the order of, or subject to the approval of, a court of competent jurisdiction in a bankruptcy or insolvency proceeding, the amount of tax due shall be computed and paid as provided in paragraph (a) of this section but shall not exceed the amount of tax computed by multiplying (1) the proportionate share of the amount for which such accounts are sold which is allocable to each unpaid installment payment, by (2) the rate of tax which, under the provisions of chapter 32 as in effect on the date of the sale of the installment account, is (or is to be) in effect on the date such payment is due.

(c) Collection of installment accounts on behalf of the manufacturer. Where a manufacturer, producer, or importer retains title to an installment account but turns it over to another person for collection on a fee basis, no sale of such account (or other disposition as contemplated in section 4216(d)) has been made. The tax shall continue to be paid as provided by section 4216(c).

(d) Returned installment accounts. Where an installment account which has been sold or otherwise disposed of is returned to the manufacturer, producer, or importer who sold it under an agreement under which the account was sold, and credit or refund has been allowed under section 6416(b)(5) and the regulations thereunder, the manufacturer, producer, or importer shall pay tax as provided by section 4216(c) and § 48.4216(c)-1 on any subsequent payments made on such returned installment account until such time as there shall have been paid the total tax liability with respect to the account as computed under paragraph (a) of this section.

(e) Limitation. The sum of the amounts payable under this section and § 48.4216(c)-1 on an installment account shall not exceed the total amount of tax which would be payable if such installment account had not been sold or otherwise disposed of (computed as provided in subsection (c)).

(f) Applicability of paragraphs (a) and (b) of this section. The rules set forth in paragraphs (a) and (b) of this section apply in the case of installment accounts sold after June 21, 1965. In the case of installment accounts sold before June 22, 1965, paragraph (b) of this section shall be applied by substituting, in lieu of subparagraph (2) thereof, “the rate of tax, as set forth in chapter 32 of the Code, which applied on the day on which the transaction giving rise to such installment accounts took place.”

(a) In general. Section 4216(e) deals with the treatment to be accorded charges made by a manufacturer for, and reimbursements by a manufacturer of expenditures in connection with, the advertising of certain articles subject to excise tax under chapter 32 of the Code. Section 4216(e) provides an exclusion (which is in addition to the exclusions provided by section 4216(a) and the regulations thereunder) in respect of charges for local advertising, as defined in paragraph (b) of this section, for purposes of determining the price for which an article is sold. See paragraph (c) of this section. The exclusion provided by section 4216(e) and paragraph (c) of this section has application only if:

(1) In the case of articles sold during the period January 1, 1961, through December 31, 1962, the advertising is broadcast over a radio or television station, or appears in a newspaper; and

(2) In the case of articles sold on or after January 1, 1963, the advertising is broadcast over a radio or television station, appears in a newspaper or magazine, or is displayed by means of an outdoor advertising sign or poster.

(b) Definition of local advertising—(1) In general. For purposes of the regulations under sections 4216(e) and 6416(b)(1), the term “local advertising” means advertising which relates to an article with respect to which tax is imposed under Chapter 32 of the Code on the price for which sold and which:

(i) Is initiated or obtained by the purchaser or any subsequent vendee,

(ii) Names the article for which the price is determinable under section 4216 and states the location at which such article may be purchased at retail, and

(iii)(a) In the case of articles sold on or after January 1, 1961, and before January 1, 1963, is broadcast over a radio station or television station or appears in a newspaper, or

(b) In the case of articles sold on or after January 1, 1963, is broadcast over a radio station or television station, appears in a newspaper or magazine, or is displayed by means of an outdoor advertising sign or poster.

(2) Initiating or obtaining advertising. For purposes of subparagraph (1) of this paragraph, the advertising must be initiated or obtained by one or more of the persons in the chain of distribution of the article (wholesale distributor, jobber, dealer, etc.) who purchased the article for resale. For purposes of this subparagraph, the manufacturer is not considered to be one of the persons in the chain of distribution of the article. In general, advertising of an article is considered to be initiated or obtained by one or more persons in the chain of distribution of the article if any such person:

(i) Takes an active part in the actual planning and development, or in the arrangements or negotiations leading to the development, of the form and content of the advertising, or

(ii) Contracts for the placement of the advertising.

(3) Identification of article and sales location. To meet the requirements of subparagraph (1) of this paragraph, the advertising must identify the article for which the price is determinable under section 4216 and give the location or locations at which the article may be purchased at retail. All products taxable at the same rate under the same section of chapter 32 of the Code shall be considered to be an “article” for purposes of the preceding sentence. No specific method or means of identification is prescribed. The identification of the article may be made through the use of the name of the manufacturer or the use of an established trade-mark, such as a seal, picture, letter or letters, etc., or a combination thereof. The advertising must identify the particular retail establishment or establishments at which the article may be purchased at retail but need not specify the location of any such establishment in terms of the number by which the premises are designated or the name of the street on which the retail premises are situated. However, the location of the retail premises must be described sufficiently, as, for example, by reference to a particular named shopping area or shopping center, to enable consumers to find the retail establishment.

(4) Determination of costs of local advertising. Where an advertisement identifies more than one article, and all such articles are not taxable, or are not taxable at the same rate under the same section of Chapter 32 of the Code, a reasonable allocation of the cost of the advertisement must be made among (i) articles taxable at the same rate under the same section of the Code and (ii) articles which are not taxable under Chapter 32 of the Code. For example, in the case of a single page newspaper or magazine advertisement, an allocation of costs reflecting the lineage or space devoted to the specified categories will be considered to reflect a reasonable allocation of the cost of advertising the different articles. As a general rule, only the cost of the “spot” portion identifying the retail establishment is considered “local advertising” in the case of national television or radio programs.

(5) Meaning of “newspaper”. The term “newspaper”, as used in subparagraph (1) of this paragraph, is limited to those publications which are commonly understood to be newspapers and which are printed and distributed periodically at daily, weekly, or other short intervals for the dissemination of news of a general character and of a general interest. The term does not include handbills, circulars, flyers, or the like, unless printed and distributed as a part of a publication which constitutes a newspaper within the meaning of this subparagraph. Neither does the term include any publication which is issued to supply information on certain subjects of interest to particular groups unless such publication otherwise qualifies as a newspaper within the meaning of this subparagraph. For purposes of this subparagraph, advertising is not considered to be news of a general character and of a general interest.

(6) Meaning of “magazine”. The term “magazine”, as used in subparagraph (1) of this paragraph, is limited to those publications which are (i) commonly understood to be magazines, (ii) printed and distributed periodically at least twice a year, and (iii) published for the dissemination of information of a general nature or of special interest to particular groups. The term does not include handbills, circulars, flyers or the like, unless printed and distributed as a part of a publication which constitutes a magazine within the meaning of this subparagraph. For purposes of this subparagraph, advertising is not considered to be information of a general nature or information of special interest to particular groups within the contemplation of subdivision (iii) of this subparagraph.

(7) Meaning of “outdoor advertising sign or poster”. The term “outdoor advertising sign or poster”, as used in subparagraph (1) of this paragraph, means a sign or poster displaying advertising matter, which is located outside of a roofed enclosure. This term includes both signs or posters on billboards, whether placed on or affixed to land, buildings, or other structures, and those which are displayed on or attached to moving objects, provided the signs or posters are located outside of a roofed enclosure. The term “roofed enclosure” means a roof structure which is enclosed on more than one-half of its sides by walls, fences, or other barriers.

(c) Exclusion—(1) Conditions and limitations. A charge for local advertising which is required by a manufacturer to be paid as a condition to his sale of an article is not a part of the taxable price of the article, to the extent that such charge meets each of the following conditions and limitations:

(i) Such charge does not exceed 5 percent of the difference between (a) an amount which would constitute to taxable price of the article (computed at the time of the sale of the article) if no part of any charge for local advertising were excludable in computing taxable price and (b) the amount of any separate charge for local advertising, whatever the amount of such charge may be,

(ii) Such charge is specifically shown as a separate charge for local advertising on the invoice or statement covering the sale of the article.

(iii) Such charge is billed by the manufacturer with the intention on his part of repaying the amount of the charge to the person purchasing the article from him, or to any person who subsequently purchases the article for resale, in reimbursement of costs incurred or local advertising of such article or some other article or articles taxable at the same rate under the same section of the Code. In the absence of evidence to the contrary, the fact of such intention will be assumed in all cases where the manufacturer and his vendees are parties to an advertising plan which calls for such repayments, or the manufacturer can otherwise establish that the vendees to whom he bills such charges understand and expect that such repayments will be made.

(2) When exclusion ceases to apply. To the extent that charge for local advertising meets the conditions and limitations stated in subparagraph (1) of this paragraph, such charge is excludable in computing the taxable price of the article in respect of which the charge was made. However, the exclusion will cease to apply in respect of any part of such charge which the manufacturer fails to repay, before May 1 of the calendar year following the calendar year in which the article was sold, to the person who purchased the article from him, or to some other person who subsequently purchases the article for resale, in reimbursement of costs incurred for local advertising of such article or some other article or articles taxable at the same rate under the same section of the Code. If, before such May 1, any part of the charge so excluded has not been so repaid, the manufacturer becomes liable for tax on such May 1 in the same manner as if an article taxable under such section of the Code had been sold by him on such May 1 at a taxable price equivalent to that part of the charge not so repaid. However, see paragraph (c)(2) of § 48.6416(b)-1, relating to price readjustments in cases where local advertising charges are not repaid before such May 1 but are subsequently paid over by the manufacturer to his vendees in reimbursement of costs for local advertising. For provisions relating to the method of determining whether a payment by a manufacturer is or is not attributable to an excluded local advertising charge, see paragraph (b)(3) of § 48.4216(e)-2. In any case where the payment is determined to be attributable to such a charge, the date of the sale in connection with which the charge was made shall be determined on a first-in-first-out basis in respect of the vendee to whom the charge was billed by the manufacturer.

(d) Examples. The application of this section may be illustrated by the following examples:

(a) In general. The sum of the amount excluded from taxable price in respect of charges for local advertising, as provided in section 4216(e)(1) and § 48.4216(e)-1, plus the amount of the readjustments for which credits or refunds may be claimed in respect of local advertising, as provided in section 6416(b)(1) and paragraph (c) of § 48.6416(b)-1, is subject to an over-all 5 percent limitation. This limitation applies to each manufacturer, as of the close of each calendar quarter, in respect of all articles taxable under the same section of Chapter 32 which were sold by such manufacturer in such quarter (and the preceding quarter of quarters, if any, in the calendar year). For example, a manufacturer selling articles taxable under section 4061 (relating to automobiles, trucks, buses, etc.), and also selling articles taxable under section 4111 (relating to refrigerators, quick-freeze units, etc.), who makes separate charges for local advertising in connection with his sales, or who makes reimbursement of local advertising expenses to his vendees out of moneys previously included in taxable price, in respect of any one or more articles in each of the two groups must apply the limitation separately in relation to the articles taxable under section 4061 and in relation to the articles taxable under section 4111. However, in such case, no breakdown of the separate articles taxable under section 4061, or of the separate articles taxable under section 4111, is required.

(b) Computation of over-all 5 percent limitation—(1) In general. The limitation prescribed by section 4216(e)(2) (the “over-all 5 percent limitation” referred to in paragraph (a) of this section) as to the total of the exclusions from price and readjustments of price which may be claimed for local advertising in respect of all articles taxable under the same section of Chapter 32 of the Code shall be computed as of the close of each calendar quarter of the calendar year. The over-all 5 percent limitation is 5 percent of the difference between (i) the amount which would constitute the total taxable price (computed at the time of sale) of all articles taxable under the same section of Chapter 32 of the Code sold by the manufacturer during the elapsed calendar quarters of the calendar year, if no part of any charge for local advertising were excludable in computing taxable price, and (ii) the total of all amounts billed as separate charges for local advertising of such articles (whatever the amount of any single charge of the total of all charges). In making the computations under subdivisions (i) and (ii) of this subparagraph, credits or refunds under section 6416(b) of tax paid on the sale of any such articles are to be disregarded and articles sold tax-free by the manufacturer are to be excluded. The amount by which the over-all 5 percent limitation computed as of the close of a particular calendar quarter in respect of articles taxable under the same section of the Code exceeds the sum of the charges for local advertising excluded in computing the taxable price and the amount of reimbursements for local advertising of such articles made during the elapsed calendar quarters of the calendar year, in respect of which credit or refund has been claimed, represents the unused portion of the over-all 5 percent limitation. Such unused portion is the maximum amount of reimbursements for local advertising in respect of which credit or refund may be claimed at the close of the particular calendar quarter, subject to the applicable conditions and limitations governing the right to claim a credit or refund in respect of local advertising (see § 48.6416(b)-1). The unused portion of the over-all 5 percent limitation as of the close of the fourth calendar quarter of a calendar year in respect of which credit or refund may not be claimed as of the close of such quarter must be disregarded in computing the over-all 5 percent limitation for any subsequent calendar quarter. Moreover, the amount of any reimbursements for local advertising made by a manufacturer in a calendar year which is in excess of the amount of such reimbursements in respect of which credit or refund may be claimed, within the over-all limitation, as of the close of the calendar year, may not subsequently serve as the basis for a credit or refund.

(2) Alternative method of computation in certain cases. If during the portion of the calendar year ending with the date as of which the over-all 5 percent limitation is being computed the amount of the local advertising charge separately billed by the manufacturer has not, in respect of any sale of any articles taxable under the same section of Chapter 32 of the Code, exceeded the amount excludable pursuant to paragraph (c) of § 48.4216(e)-1 in computing taxable price, the over-all 5 percent limitation as of the close of a particular calendar quarter in respect of articles taxable under such section is 5 percent of the total taxable price (computed at the time of the sale) of all such articles sold taxpaid during the calendar year.

(3) Allocation of amounts paid in reimbursement of expenditures for local advertising. If a manufacturer makes contributions to a local advertising program in connection with which he makes excludable local advertising charges, it is necessary that reimbursements by the manufacturer for local advertising be attributed to the charges for local advertising, to the manufacturer's contributions, or allocated between them. Whether an amount paid by a manufacturer in reimbursement of expenses for local advertising is or is not a repayment of a local advertising charge which was excluded from taxable price under section 4216(e)(1) and § 48.4216(e)-1, shall be determined on the basis of an allocation made under the agreement between the manufacturer and his vendee (or any subsequent vendee).

(c) Examples. The application of paragraphs (a) and (b) of this section may be illustrated by the following examples:

(a) Exclusions from price. No exclusion in computing the taxable price of any article sold by the manufacturer may be allowed in respect of any charge for advertising if, and to the extent that, such charge:

(1) Is for advertising which does not qualify as local advertising within the meaning of section 4216(e)(4) and paragraphs (a) and (b) of § 48.4216(e)-1, or

(2) Does not satisfy all of the conditions and limitations stated in section 4216(e)(1) and paragraph (c) of § 48.4216(e)-1.

(b) Readjustments of price. No credit or refund under section 6416(b)(1) may be allowed in respect of any amount which was included in the taxable price of an article sold by the manufacturer and which was later paid by him to his vendee in reimbursement of costs incurred for advertising, if, and to the extent that, the amount so paid:

(1) Is for advertising which does not qualify as local advertising within the meaning of section 4216(e)(4) and paragraph (b) of § 48.4216(e)-1, or

(2) Is not within the limitation provided in section 4216(e)(2), as computed in accordance with § 48.4216(e)-2, as of the close of the calendar quarter in which the amount is so paid over or as of the close of any subsequent calendar quarter in the same calendar year. See, however, paragraph (c)(2)(ii) of § 48.6416(b)-1, relating to redetermination of price readjustments in cases where local advertising charges excluded from taxable price in one calendar year become taxable as of May 1 of the following calendar year.

For purposes of the tax imposed by section 4061(a)(1) (relating to trucks, buses, etc.), in determining the price for which an article is sold, the value of any previously used component of such article shall be excluded from the price if the person furnishing the component is the first user of the finished article. For example, where a manufacturer builds a truck for a customer who intends to use, rather than resell the truck, incorporating used parts furnished by the customer, the value of the previously used parts shall not be included in the price for which the truck is considered sold by the manufacturer.

For purposes of Chapter 32 of the Code, the lease of an article by a manufacturer, producer, or importer shall be considered a sale of the article. The term “lease” means a contract or agreement, written or verbal, which gives the lessee an exclusive, continuous right to the possession or use of a particular article for a period of time. The term includes any renewal or extension of a lease or any subsequent lease of the article. However, in the case of the lease of an automobile the sale of which by the manufacturer would be taxable under section 4064, the term includes only the first lease (excluding any renewal or extension of the lease) of such automobile by the manufacturer.

(a) Conditions for eligibility. Section 4217(b) provides for a limitation on the amount of tax that shall apply to the lease, any renewal, or further lease, of an article which, if sold, would be subject to tax on the basis of sale price. Such limitation on the amount of the tax applies with respect to the lease of an article only if, at the time of making the lease, the lessor is engaged in the business of selling in arm's length transactions the same type and model of article. In case of a lease to which section 4217(b) does not apply, tax shall be computed and paid as provided in section 4216(c) and paragraph (a) of § 48.4216(c)-1.

(b) Lessor engaged in business of selling. The lessor will be regarded as being engaged in the business of selling in arm's length transactions the same type and model of an article as the one being leased if it periodically and recurringly makes bona fide offers for sale of such articles in the regular course of operation of its business, which offers if accepted would constitute sales at arm's length. Whether the offers are bona fide shall be determined on the basis of the facts in each case, such as sales actually made, the nature of the advertising, sales literature, and other means used to effectuate sales. It is not necessary that the offers for sale be made to the same class of purchasers as those to whom the article is being leased.

(c) Same type and model of article. To qualify as the “same type and model of article”, the article offered for sale must be an unused article essentially the same in size, design, and function as the article being leased. For example, a van-type truck trailer would not be the same type and model as a stake-body of flat-bed truck trailer. Neither would a 25-foot van-type trailer be the same type and model as a 35-foot van-type trailer. Slight differences in appearance or accessories will not render articles dissimilar which are identical in all other respects.

(d) Basis for tax—(1) Tax payable until total tax is paid. In case of a lease of an article to which section 4217 (b) applies, tax shall be paid on each lease payment in an amount computed by applying to such lease payment a percentage equal to the rate of tax in effect on the date of the lease payment. Such tax payments shall continue to be made under such lease, or any subsequent lease of the article, until the cumulative total of the tax payments equals the total tax. Lease payments made thereafter with respect to that article shall not be subject to tax. For definition of the term “total tax”, see paragraph (e) of this section.

(2) Changes in tax rates. Except as provided in:

(i) Section 701 (a) (3) of the Excise Tax Reduction Act of 1965 (79 Stat. 155) in the case of certain reductions in tax rates effective June 22, 1965, or January 1, 1966, and

(ii) Section 401(h)(3) of the Revenue Act of 1971 (85 Stat. 534) in the case of certain reductions in tax rates effective December 11, 1971, if the rate of tax is increased or decreased during a lease period, the new rate shall apply to the lease payments made on and after the date of the change, but the amount of the total tax shall remain the same.

(e) Total tax. For purposes of this section, the term “total tax” means the amount of tax, computed at the rate in effect on the date of the first lease of the article to which section 4217(b) applies, which would be due on the constructive sale price of the article as determined under section 4216(b) and § 48.4216(b)-2, as if the article had been sold by a manufacturer at retail on such date.

(f) Sale of article before total tax becomes payable. If the lessor sells the article before the total tax has become payable, the tax payable on the sale shall be the lesser of the following amounts:

(1) The difference between (i) the total tax, and (ii) the aggregate tax applicable to lease payments already received; or

(2) A tax computed, at the rate in effect on the date of the sale, on the price for which the article is sold.

(g) Sale of article after total tax has become payable. If the lessor sells an article after the total tax has become payable, the tax imposed under Chapter 32 of the Code shall not apply to such sale.

(h) Special rules applicable to certain leases entered into before January 1, 1959. For purposes of this section, in the case of any lease entered into before, and existing on, January 1, 1959:

(1) Such lease shall be considered to have been entered into on January 1, 1959.

(2) The total tax shall be computed on the fair market value of the article on January 1, 1959.

(3) The lease payments under such lease shall include only payents attributable to periods beginning after December 31, 1958.

(i) Cross-reference. In the case of the lease of an automobile the sale of which by the manufacturer would be taxable under section 4064, the foregoing provisions of this section shall not apply. See section 4217 (e) for the rules relating to the payment of the gas guzzler tax.

(a) General rule. If the title to, or ownership of, an article taxable under Chapter 32 of the Code is transferred from the manufacturer, producer, or importer thereof, and, under the law, no tax attaches to such transfer, the subsequent sale, lease, or use of such article by the transferee is subject to tax to the same extent and in the same manner as if such transferee were the manufacturer, producer, or importer of the article. The following examples illustrate this rule:

(1) The surviving spouse, child or children, executors or administrators, or other legal representatives, as the case may be, of a deceased manufacturer, producer, or importer of taxable articles, incur liability for tax on all such articles sold by them.

(2) A receiver or trustee in bankruptcy who under a court order conducts or liquidates the business of a manufacturer, producer, or importer of taxable articles, incurs liability for tax on all taxable articles sold by him, regardless of whether the articles were manufactured, produced, or imported before or after he took charge of the business.

(3) An assignee for the benefit of creditors of a manufacturer, producer, or importer incurs liability for tax with respect to all taxable articles sold by him as such assignee.

(4) If one or more members of a partnership withdraw, or if new partners are admitted, the new partnership so constituted incurs liability for tax on all taxable articles sold by it regardless of when such articles were manufactured, produced, or imported.

(5) A person who acquires title to taxable articles as a result of default of the manufacturer, producer, or importer pursuant to an agreement under the terms of which the articles were pledged as collateral incurs liability for tax with respect to his sale of the articles so acquired.

(6) A person who succeeds to the business of a manufacturer, producer, or importer of taxable articles, such as:

(i) A corporation which results from a consolidation, merger, or reorganization;

(ii) A corporation which acquires the business of an individual or partnership; or

(iii) A stockholder in a corporation who, after its dissolution, continues the business;

(b) Transfer of title to damaged articles. If title to a damaged taxable article is transferred by the manufacturer, producer, or importer thereof to a carrier or insurance company in adjustment of a damage claim, such transfer is not considered a taxable sale of the article. If the article is usable, even though damaged, the carrier or insurance company incurs liability for tax on its sale, lease, or use of the article. Where the article has been damaged to the extent that its only value is as scrap, and it is not restored to usable condition, sale thereof by the carrier or insurance company is not subject to tax.