This subpart applies to discharges of pollutants to waters of the United States and introduction of pollutants into publicly owned treatment works from the core and the ancillary operations of the drawing with emulsions or soaps subcategory.
For the purpose of this subpart:
(a) The “core” of the drawing with emulsions or soaps subcategory shall include drawing using emulsions or soaps, stationary casting, artificial aging, annealing, degreasing, sawing, and swaging.
(b) The term “ancillary operation” shall mean any operation not previously included in the core, performed on-site, following or preceding the drawing operation. The ancillary operations shall include continuous rod casting, solution heat treatment and cleaning or etching.
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available:
Subpart F
Core
| Pollutant or pollutant property
| BPT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps
|
| Chromium | 0.205 | 0.084
|
| Cyanide | 0.135 | 0.056
|
| Zinc | 0.680 | 0.285
|
| Aluminum | 3.00 | 1.50
|
| Oil and grease | 9.33 | 5.60
|
| Suspended solids | 19.12 | 9.10
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| BPT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cast
|
| Chromium | 0.0009 | 0.0004
|
| Cyanide | 0.0006 | 0.0003
|
| Zinc | 0.0029 | 0.001
|
| Aluminum | 0.013 | 0.007
|
| Oil and grease | 0.040 | 0.024
|
| Suspended solids | 0.081 | 0.039
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| BPT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cast
|
| Chromium | 0.684 | 0.28
|
| Cyanide | 0.450 | 0.187
|
| Zinc | 2.27 | 0.949
|
| Aluminum | 10.00 | 4.976
|
| Oil and grease | 31.10 | 18.66
|
| Suspended solids | 63.76 | 30.323
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| BPT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum quenched
|
| Chromium | 3.39 | 1.39
|
| Cyanide | 2.24 | 0.93
|
| Zinc | 11.25 | 4.70
|
| Aluminum | 49.55 | 24.66
|
| Oil and grease | 154.10 | 92.46
|
| Suspended solids | 315.91 | 150.25
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| BPT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.079 | 0.032
|
| Cyanide | 0.052 | 0.022
|
| Zinc | 0.262 | 0.109
|
| Aluminum | 1.15 | 0.573
|
| Oil and grease | 3.58 | 2.15
|
| Suspended solids | 7.34 | 3.49
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| BPT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 6.12 | 2.51
|
| Cyanide | 4.04 | 1.67
|
| Zinc | 20.31 | 8.49
|
| Aluminum | 89.46 | 44.519
|
| Oil and grease | 278.24 | 166.95
|
| Suspended solids | 570.39 | 271.29
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| BPT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 7.00 | 2.86
|
| Cyanide | 4.61 | 1.91
|
| Zinc | 23.22 | 9.70
|
| Aluminum | 102.24 | 50.88
|
| Oil and grease | 318.00 | 190.80
|
| Suspended solids | 651.90 | 310.05
|
| pH | (
1) | (
1)
|
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. The discharge of wastewater pollutants from the core shall not exceed the volumes set forth below:
Subpart F
Core
| Pollutant or pollutant property
| BAT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps
|
| Chromium | 0.205 | 0.084
|
| Cyanide | 0.135 | 0.056
|
| Zinc | 0.681 | 0.285
|
| Aluminum | 3.00 | 1.49 |
| Pollutant or pollutant property
| BAT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.0009 | 0.0004
|
| Cyanide | 0.0006 | 0.0003
|
| Zinc | 0.0029 | 0.0012
|
| Aluminum | 0.013 | 0.0063 |
| Pollutant or pollutant property
| BAT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.086 | 0.035
|
| Cyanide | 0.056 | 0.024
|
| Zinc | 0.283 | 0.118
|
| Aluminum | 1.25 | 0.62 |
| Pollutant or pollutant property
| BAT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum quenched
|
| Chromium | 0.897 | 0.37
|
| Cyanide | 0.591 | 0.25
|
| Zinc | 2.98 | 1.24
|
| Aluminum | 13.10 | 6.52 |
| Pollutant or pollutant property
| BAT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.079 | 0.032
|
| Cyanide | 0.052 | 0.022
|
| Zinc | 0.262 | 0.11
|
| Aluminum | 1.15 | 0.57 |
| Pollutant or pollutant property
| BAT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.612 | 0.251
|
| Cyanide | 0.404 | 0.167
|
| Zinc | 2.03 | 0.849
|
| Aluminum | 8.95 | 4.45 |
| Pollutant or pollutant property
| BAT effluent limitations
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.85 | 0.348
|
| Cyanide | 0.561 | 0.232
|
| Zinc | 2.82 | 1.18
|
| Aluminum | 12.43 | 6.19 |
Any new source subject to this subpart must achieve the following performance standards. The discharge of wastewater pollutants from the core shall not exceed the values set forth below:
Subpart F
Core
| Pollutant or pollutant property
| NSPS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps
|
| Chromium | 0.173 | 0.070
|
| Cyanide | 0.094 | 0.038
|
| Zinc | 0.476 | 0.196
|
| Aluminum | 2.85 | 1.27
|
| Oil and grease | 4.67 | 4.67
|
| Suspended solids | 7.00 | 5.60
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| NSPS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.0008 | 0.0003
|
| Cyanide | 0.0004 | 0.0002
|
| Zinc | 0.0020 | 0.0008
|
| Aluminum | 0.012 | 0.0053
|
| Oil and grease | 0.020 | 0.020
|
| Suspended solids | 0.030 | 0.024
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| NSPS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| | mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.072 | 0.029
|
| Cyanide | 0.039 | 0.016
|
| Zinc | 0.198 | 0.081
|
| Aluminum | 1.184 | 0.526
|
| Oil and grease | 1.940 | 1.940
|
| Suspended solids | 2.91 | 2.33
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| NSPS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| | mg/off-kg (lb/million off-lbs) of aluminum quenched
|
| Chromium | 0.754 | 0.31
|
| Cyanide | 0.408 | 0.16
|
| Zinc | 2.08 | 0.86
|
| Aluminum | 12.450 | 5.52
|
| Oil and grease | 20.37 | 20.37
|
| Suspended solids | 20.56 | 24.45
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| NSPS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.066 | 0.027
|
| Cyanide | 0.036 | 0.015
|
| Zinc | 0.183 | 0.075
|
| Aluminum | 1.094 | 0.49
|
| Oil and grease | 1.79 | 1.79
|
| Suspended solids | 2.69 | 2.15
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| NSPS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| | mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.515 | 0.21
|
| Cyanide | 0.278 | 0.11
|
| Zinc | 1.42 | 0.59
|
| Aluminum | 8.50 | 3.77
|
| Oil and grease | 13.91 | 13.91
|
| Suspended solids | 20.87 | 16.70
|
| pH | (
1) | (
1)
|
| Pollutant or pollutant property
| NSPS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.72 | 0.290
|
| Cyanide | 0.387 | 0.155
|
| Zinc | 1.97 | 0.812
|
| Aluminum | 1.18 | 5.24
|
| Oil and grease | 19.33 | 19.33
|
| Suspended solids | 29.00 | 23.20
|
| pH | (
1) | (
1)
|
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the values set forth below:
Subpart F
Core
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps
|
| Chromium | 0.205 | 0.084
|
| Cyanide | 0.135 | 0.056
|
| Zinc | 0.681 | 0.285
|
| TTO | 0.32 | |
| Oil and grease (alternate monitoring parameter) | 25 | 12 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.0009 | 0.0004
|
| Cyanide | 0.0006 | 0.0003
|
| Zinc | 0.0029 | 0.0012
|
| TTO | 0.0014 | |
| Oil and grease (alternate monitoring parameter) | 0.10 | 0.052 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.086 | 0.035
|
| Cyanide | 0.056 | 0.024
|
| Zinc | 0.283 | 0.119
|
| TTO | 0.134 | |
| Oil and grease (alternate monitoring parameter | 10 | 5.1 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthy average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum quenched
|
| Chromium | 0.896 | 0.367
|
| Cyanide | 0.591 | 0.245
|
| Zinc | 2.98 | 1.25
|
| TTO | 1.41 | |
| Oil and grease (alternate monitoring parameter) | 110 | 53 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthy average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.079 | 0.032
|
| Cyanide | 0.052 | 0.022
|
| Zinc | 0.262 | 0.11
|
| TTO | 0.124 | |
| Oil and grease (alternate monitoring parameter) | 9.3 | 4.7 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthy average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.612 | 0.251
|
| Cyanide | 0.404 | 0.167
|
| Zinc | 2.03 | 0.849
|
| TTO | 0.96 | |
| Oil and grease (alternate monitoring parameter) | 73 | 36 |
| Pollutant or pollutant property
| PSES
|
|---|
| Maximum for any 1 day
| Maximum for monthy average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.851 | 0.348
|
| Cyanide | 0.561 | 0.232
|
| Zinc | 2.82 | 1.18
|
| TTO | 1.33 | |
| Oil and grease (alternate monitoring parameter) | 100 | 50 |
Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources. The mass of wastewater pollutants in aluminum forming process wastewaters introduced into a POTW shall not exceed the values set forth below:
Subpart F
Core
| Pollutant or pollutant property
| PSNS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps
|
| Chromium | 0.173 | 0.070
|
| Cyanide | 0.094 | 0.038
|
| Zinc | 0.48 | 0.196
|
| TTO | 0.32 | |
| Oil and grease (alternate monitoring parameter) | 4.67 | 4.67 |
| Pollutant or pollutant property
| PSNS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.0008 | 0.0003
|
| Cyanide | 0.0004 | 0.0002
|
| Zinc | 0.0020 | 0.0008
|
| TTO | 0.0014 | |
| Oil and grease (alternate monitoring parameter) | 0.020 | 0.020 |
| Pollutant or pollutant property
| PSNS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum rod cast
|
| Chromium | 0.072 | 0.029
|
| Cyanide | 0.039 | 0.016
|
| Zinc | 0.198 | 0.082
|
| TTO | 0.134 | |
| Oil and grease (alternate monitoring parameter) | 1.94 | 1.94 |
| Pollutant or pollutant property
| PSNS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum quenched
|
| Chromium | 0.76 | 0.306
|
| Cyanide | 0.41 | 0.163
|
| Zinc | 2.08 | 0.856
|
| TTO | 1.41 | |
| Oil and grease (alternate monitoring parameter) | 20.37 | 20.37 |
| Pollutant or pollutant property
| PSNS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.067 | 0.027
|
| Cyanide | 0.036 | 0.015
|
| Zinc | 0.183 | 0.075
|
| TTO | 0.124 | |
| Oil and grease (alternate monitoring parameter) | 1.79 | 1.79 |
| Pollutant or pollutant property
| PSNS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.52 | 0.21
|
| Cyanide | 0.28 | 0.11
|
| Zinc | 1.42 | 0.59
|
| TTO | 0.96 | |
| Oil and grease (alternate monitoring parameter) | 13.91 | 13.91 |
| Pollutant or pollutant property
| PSNS
|
|---|
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
| Chromium | 0.715 | 0.290
|
| Cyanide | 0.387 | 0.155
|
| Zinc | 1.97 | 0.812
|
| TTO | 1.34 | |
| Oil and grease (alternate monitoring parameter) | 19.33 | 19.33 |
source: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.
cite as: 40 CFR 467.63