50 CFR 229.31 - Pacific Offshore Cetacean Take Reduction Plan.

Regulations last checked for updates: Oct 18, 2024

Title 50 - Wildlife and Fisheries last revised: Oct 09, 2024

Collapse to view only § 229.31 - Pacific Offshore Cetacean Take Reduction Plan.

Table of Contents

§ 229.30 - Basis.

§ 229.31 - Pacific Offshore Cetacean Take Reduction Plan.

§ 229.32 - Atlantic large whale take reduction plan regulations.

§ 229.33 - Harbor Porpoise Take Reduction Plan Regulations—New England.

§ 229.34 - Harbor Porpoise Take Reduction Plan Regulations—Mid-Atlantic.

§ 229.35 - Bottlenose Dolphin Take Reduction Plan.

§ 229.36 - Atlantic Pelagic Longline Take Reduction Plan (PLTRP).

§ 229.37 - False Killer Whale Take Reduction Plan.

Appendix - Figure 1 to Part 229—Drift Gillnet Pinger Configuration and Extender Requirements

§ 229.30 - Basis.

Section 118(f)(9) of the Act authorizes the Director, NMFS, to impose regulations governing commercial fishing operations, when necessary, to implement a take reduction plan in order to protect or restore a marine mammal stock or species covered by such a plan.

[64 FR 9088, Feb. 24, 1999]

§ 229.31 - Pacific Offshore Cetacean Take Reduction Plan.

(a) Purpose and scope. The purpose of this section is to implement the Pacific Offshore Cetacean Take Reduction Plan. Paragraphs (b) through (d) of this section apply to all U.S. drift gillnet fishing vessels operating in waters seaward of the coast of California or Oregon, including adjacent high seas waters. For purposes of this section, the fishing season is defined as beginning May 1 and ending on January 31 of the following year.

(b) Extenders. An extender is a line that attaches a buoy (float) to a drift gillnet's floatline. The floatline is attached to the top of the drift gillnet. All extenders (buoy lines) must be at least 6 fathoms (36 ft; 10.9 m) in length during all sets. Accordingly, all floatlines must be fished at a minimum of 36 feet (10.9 m) below the surface of the water.

(c) Pingers. (1) For the purposes of this paragraph (c), a pinger is an acoustic deterrent device which, when immersed in water, broadcasts a 10 kHz (±2 kHz) sound at 132 dB (±4 dB) re 1 micropascal at 1 m, lasting 300 milliseconds (+ 15 milliseconds), and repeating every 4 seconds (+ .2 seconds); and remains operational to a water depth of at least 100 fathoms (600 ft or 182.88 m).

(2) While at sea, operators of drift gillnet vessels with gillnets onboard must carry enough pingers on the vessel to meet the requirements set forth under paragraphs (c)(3) through(6) of this section.

(3) Floatline. Pingers shall be attached within 30 ft (9.14 m) of the floatline and spaced no more than 300 ft (91.44 m) apart.

(4) Leadline. Pingers shall be attached within 36 ft (10.97 m) of the leadline and spaced no more than 300 ft (91.44 m) apart.

(5) Staggered Configuration. Pingers attached within 30 ft (9.14 m) of the floatline and within 36 ft (10.97 m) of the leadline shall be staggered such that the horizontal distance between them is no more than 150 ft (45.5 m).

(6) Any materials used to weight pingers must not change its specifications set forth under paragraph (c)(1) of this section.

(7) The pingers must be operational and functioning at all times during deployment.

(8) If requested, NMFS may authorize the use of pingers with specifications or pinger configurations differing from those set forth in paragraphs (c)(1) and (c)(3) of this section for limited, experimental purposes within a single fishing season.

(d) Skipper education workshops. After notification from NMFS, vessel operators must attend a skipper education workshop before commencing fishing each fishing season. For the 1997/1998 fishing season, all vessel operators must have attended one skipper education workshop by October 30, 1997. NMFS may waive the requirement to attend these workshops by notice to all vessel operators.

[62 FR 51813, Oct. 3, 1997, as amended at 63 FR 27861, May 21, 1998; 64 FR 3432, Jan. 22, 1999]

§ 229.32 - Atlantic large whale take reduction plan regulations.

(a) Purpose and scope—(1) Whales and fixed gear fisheries. The purpose of this section is to implement the Atlantic Large Whale Take Reduction Plan to reduce incidental mortality and serious injury of fin, humpback, and right whales in specific Category I and Category II commercial fisheries from Maine through Florida. Specific Category I and II commercial fisheries within the scope of the Plan are identified and updated in the annual List of Fisheries. The measures identified in the Atlantic Large Whale Take Reduction Plan are also intended to benefit minke whales, which are not designated as a strategic stock, but are known to be taken incidentally in gillnet and trap/pot fisheries. The gear types affected by this plan include gillnets (e.g., anchored, drift, and shark) and traps/pots. The Assistant Administrator may revise the requirements set forth in this section in accordance with paragraph (i) of this section;

(2) Regulated waters—(i) U.S. Atlantic waters. The regulations in this section apply to all U.S. waters in the Atlantic except for the areas exempted in paragraph (a)(3) of this section;

(ii) Northeast Region. The Northeast Region referred to in paragraphs (b)(1) (b)(2)(i), (b)(3), and (c)(2)(iv) of this section applies to ocean waters within an area bounded on the west by land or by a rhumb line from 41°18.2′ N lat., 71°51.5′ W long. (Watch Hill Point, RI) and on the south by the 40°00′ N lat. line running east to the EEZ line, and bounded on the east by the EEZ north to the U.S./Canada border except for the areas and specific purposes exempted in paragraph (a)(3) of this section; and

(iii) Six-mile line. The six-mile line referred to in paragraph (c)(2)(iv) of this section is a line connecting the following points (Machias Seal to Provincetown):

Table 1 to Paragraph (a)(2)(iii)

44°31.98′ N lat., 67°9.72′ W long. (Machias Seal)

44°3.42′ N lat., 68°10.26′ W long. (Mount Desert Island)

43°40.98′ N lat., 68°48.84′ W long. (Matinicus)

43°39.24′ N lat., 69°18.54′ W long. (Monhegan)

43°29.4′ N lat., 70°5.88′ W long. (Casco Bay)

42°55.38′ N lat., 70°28.68′ W long. (Isle of Shoals)

42°49.53′ N lat., 70°32.84′ W long.

42°46.74′ N lat., 70°27.70′ W long.

42°44.18′ N lat., 70°24.91′ W long.

42°41.61′ N lat., 70°23.84′ W long.

42°38.18′ N lat., 70°24.06′ W long.

42°35.39′ N lat., 70°25.77′ W long.

42°32.61′ N lat., 70°27.91′ W long.

42°30.00′ N lat., 70°30.60′ W long.

42°17.19′ N lat., 70°34.80′ W long.

42°12.48′ N lat., 70°32.20′ W long.

42°12.27′ N lat., 70°25.98′ W long.

42°11.62′ N lat., 70°16.78′ W long.

42°12.27′ N lat., 70°10.14′ W long.

42°12.05′ N lat., 70°54.26′ W long.

42°11.20′ N lat., 70°17.86′ W long.

42°09.55′ N lat., 69°58.80′ W long. (Provincetown)

(iv) Maine pocket waters. The pocket waters referred to in paragraph (c)(2)(iv) of this section are defined as follows:

Table 2 to Paragraph (a)(2)(iv)

West of Monhegan Island in the area north of the line 43°42.17′ N lat., 69°34.27′ W long. and 43°42.25′ N lat., 69°19.3′ W long.

East of Monhegan Island in the area located north of the line 43°44′ N lat., 69°15.08′ W long. and 43°48.17′ N lat., 69°8.02′ W long.

South of Vinalhaven Island in the area located west of the line 43°52.31′ N lat., 68°40′ W long. and 43°58.12′ N lat., 68°32.95′ W long.

South of Bois Bubert Island in the area located northwest of the line 44°19.27′ N lat., 67°49.5′ W long. and 44°23.67′ N lat., 67°40.5′ W long.

(v) Maine Lobster Management Zones: The Maine Zones referred to in paragraph (c)(2)(iv) of this section include waters seaward of the Maine Exempted Waters referred to in paragraph (a)(3)(ii)(A) of this section as managed in eight Zones defined by Maine DMR. The Zones are bounded northeast by the U.S./Canada EEZ International Boundary line, offshore by the Lobster Management Area (LMA) boundary where LMA 1 meets the border of LMA 3 (LMA 1/LMA 3 boundary), and to the west by a boundary proceeding offshore from the Maine/New Hampshire state line. Individual Zone boundaries are defined as follows:

Table 3 to Paragraph (a)(2)(v)

Maine lobster management zone	Description
A—East	The eastern and offshore boundary of Zone A East follows the International Boundary line between Canada and the United States (Maine) extending to and following the Exclusive Economic Zone boundary to approximately 44°8′ N lat., 67°18.00′ W long. The western boundary runs from that point due north along the 67°18.00′ W long. line to Cross Island, Maine.
A—West	The eastern boundary of Zone A West is the western boundary of Zone A East. The western boundary of Zone A West follows: A line running from the Southern tip of Schoodic Point at 44°19.90′ N lat., and 68°03.61′ W long. and running south southeast to the LMA1/LMA3 border at 43°45.43′ N lat. and 67°50.12′ W long. The offshore boundary is the LMA1/LMA3 boundary.
B	The eastern boundary of Zone B is the western boundary of Zone A West.
	The western boundary follows a line that starts at the southernmost end of Newbury Neck following a straight line connecting the points as follows:
	44°13.7′ N lat, 68°27.8 W long. (a point 1/4 mile due east of Pond Island), then to the easternmost point of Black Island then to the navigation buoy R “8” at the western entrance of York Narrows then south to Swans Island Head then continuing along the southwestern shore of Swans Island to West Point then following the western boundary of the Swans Island Lobster Conservation Area southerly to a point at 44° 01.9′ N lat, 68°28.6′ W long, then SSE to 43°32.66′ N lat., 68°17.28′ W long. where it intersects the LMA1/LMA3 boundary.
	The offshore boundary is the LMA1/LMA3 boundary.
C	The eastern boundary of Zone C is the western boundary of Zone B.
	The western boundary runs along a line connecting the points as follows:
	44°18.72′ N lat., 68°49.61′ W long. (Head of the Cape, Cape Rosier), SSW to 44°10.49′ N lat., 68°55.57′ W long., SW to 44°06.14′ N lat, 69°00.00′ W long., S to 44°04.51′ N lat., 69°00.01′ W long., SSE to 44° 00.79′ N lat., 68°59.48′ W long., SSE to 43°58.01′ N lat., 68°58.02′ W long., WSW to 43°57.82′ N lat., 68° 58.69′ W long., SSW to 43°56.86′ N lat., 68°58.85′ W long., SE to 43°55.30′ N lat., 68°55.00′ W long., WSW to 43°54.27′ N lat., 68°58.33′ W long., S to 43°51.00′ N lat., 68°58.31′ W long., W to 43°51.00′ N lat., 69°00.11′ W long., SSE to 43°46.57′ N lat., 68°59.30′ W long., SW to 43°44.88′ N lat., 69°01.97′ W long., SE to 43°35.08′ N lat., 68° 50.08′ W long., S to 43°19.63′ N lat., 68° 44.255′ W long. where it intersects the LMA1/LMA3 boundary.
	The offshore boundary is the LMA1/LMA3 boundary.
D	The eastern boundary of Zone D runs along the points as follows:
	44° 18.72′ N, 068° 49.61′ W (Head of the Cape, Cape Rosier), SSW to 44° 10.492′ N, 068° 55.574′ W, SW to 44° 06.136′ N, 069° 00.000′ W, S to 44° 04.506′ N, 069° 00.014′ W, SSE to 44° 00.788′ N, 068° 59.475′ W, SSE to 43° 58.011′ N, 068° 58.023′ W, ENE to 43° 58.194′ N, 068° 57.381′ W, SSE to 43° 57.309′ N, 068° 57.226′ W, SE to 43° 55.688′ N, 068° 53.662′ W, WSW to 43° 55.285′ N, 068° 55.000′ W, WSW to 43° 54.265′ N, 068° 58.330′ W, S to 43° 50.997′ N, 068° 58.313′ W, W to 43° 51.001′ N, 069° 00.107′ W, SSE to 43° 46.565′ N, 068° 59.298′ W, NE to 43° 47452′ N, 068° 57.853′ W, SE to 43° 44.669′ N, 068° 54.350′ W, S to 43°19.63′ N lat., 68° 44.255′ W long. where it intersects the LMA1/LMA3 boundary.
	The western boundary of Zone D starts at the southern tip of Pemaquid Point, SSW and follows a line connecting the points as follows:
	43°48.1′ N lat, 69°30′W long., S to 43°39.0′ N lat, 69°30.0′ W long., S to 43°02.57′ N lat, 69°16.43′ W long., to where it intersects the LMA1/LMA3 boundary.
	The offshore boundary is the LMA1/LMA3 boundary.
E	The eastern boundary of Zone E is the western boundary of Zone C.
	The western boundary of Zone E begins at Newbury Point in Small Point Harbor, Phippsburg and follows a line connecting the points as follows:
	SSW to N″2′, SSE to “2BH”, S to 43°38.73′ N lat., 69°49.95′ W long., along the 3 mile line to 43°38.87′ N lat., 69°48.82′ W long, S to 42°53.51′ N lat., 69° 32.18′ W long., where it intersects the LMA1/LMA3 boundary.
	The offshore boundary is the LMA1/LMA3 boundary.
F	The eastern boundary of Zone F is the western boundary of Zone E.
	The western boundary of Zone F runs in a straight line from the active Lighthouse at Two Lights Cape Elizabeth and follows a line connecting the points as follows:
	43°31.80′ N lat. 70°08.56′ W long. near the C “1” East Hue & Cry buoy, WSW to 43°29.28′ N lat, 70°11.77′ W long., S to 42°36.22′ N lat. 69°52.66′ W long, where it intersects the southeastern apex of Zone G. From this point, Zone F boundary follows a straight line southeast to 42°29.85′ N−69° 40.08′ W where it meets the LMA1/LMA3 boundary.
	The offshore boundary is the LMA1/LMA3 boundary.
G	The eastern boundary of Zone G is as follows:
	43° 41.550′ N, 070° 14.650′ W, SSE 159° Magnetic to 43° 32.875′ N, 070° 05.920′ W, SSE to 42° 31.50′ N, −69° 43.34′ W where it meets with the southwestern boundary of Zone F.
	The western boundary of Zone G is the seaward extension of the Maine—NH border and follows a line connecting the points as follows:
	43°02.62′ N lat. 70°42.1′ W long., to 42°58.92′ N lat., 70°37.65′ W long., to 42°58.75′ N lat., 70°36.72′ W long., to where it intersects with the western Zone F boundary.

(3) Exempted waters—(i) COLREGS demarcation line. The regulations in this section do not apply to waters landward of the 72 COLREGS demarcation lines (International Regulations for Preventing Collisions at Sea, 1972), as depicted or noted on nautical charts published by the National Oceanic and Atmospheric Administration (Coast Charts 1:80,000 scale), and as described in 33 CFR part 80 with the exception of the COLREGS lines for Casco Bay (Maine), Portsmouth Harbor (New Hampshire), Gardiners Bay and Long Island Sound (New York), and the state of Massachusetts;

(ii) Other exempted waters—(A) Maine. The regulations in this section do not apply to waters landward of a line connecting the following points (Quoddy Narrows/U.S.-Canada border to Odiornes Pt., Portsmouth, New Hampshire):

Table 4 to Paragraph (a)(3)(ii)(A)

44°49.67′ N lat., 66°57.77′ W long. (R N “2”, Quoddy Narrows)

44°48.64′ N lat., 66°56.43′ W long. (G “1” Whistle, West Quoddy Head)

44°47.36′ N lat., 66°59.25′ W long. (R N “2”, Morton Ledge)

44°45.51′ N lat., 67°02.87′ W long. (R “28M” Whistle, Baileys Mistake)

44°37.70′ N lat., 67°09.75′ W long. (Obstruction, Southeast of Cutler)

44°27.77′ N lat., 67°32.86′ W long. (Freeman Rock, East of Great Wass Island)

44°25.74′ N lat., 67°38.39′ W long. (R “2SR” Bell, Seahorse Rock, West of Great Wass Island)

44°21.66′ N lat., 67°51.78′ W long. (R N “2”, Petit Manan Island)

44°19.08′ N lat., 68°02.05′ W long. (R “2S” Bell, Schoodic Island)

44°13.55′ N lat., 68°10.71′ W long. (R “8BI” Whistle, Baker Island)

44°08.36′ N lat., 68°14.75′ W long. (Southern Point, Great Duck Island)

43°59.36′ N lat., 68°37.95′ W long. (R “2” Bell, Roaring Bull Ledge, Isle Au Haut)

43°59.83′ N lat., 68°50.06′ W long. (R “2A” Bell, Old Horse Ledge)

43°56.72′ N lat., 69°04.89′ W long. (G “5TB” Bell, Two Bush Channel)

43°50.28′ N lat., 69°18.86′ W long. (R “2 OM” Whistle, Old Man Ledge)

43°48.96′ N lat., 69°31.15′ W long. (GR C “PL”, Pemaquid Ledge)

43°43.64′ N lat., 69°37.58′ W long. (R “2BR” Bell, Bantam Rock)

43°41.44′ N lat., 69°45.27′ W long. (R “20ML” Bell, Mile Ledge)

43°36.04′ N lat., 70°03.98′ W long. (RG N “BS”, Bulwark Shoal)

43°31.94′ N lat., 70°08.68′ W long. (G “1”, East Hue and Cry)

43°27.63′ N lat., 70°17.48′ W long. (RW “WI” Whistle, Wood Island)

43°20.23′ N lat., 70°23.64′ W long. (RW “CP” Whistle, Cape Porpoise)

43°04.06′ N lat., 70°36.70′ W long. (R N “2MR”, Murray Rock)

43°02.93′ N lat., 70°41.47′ W long. (R “2KR” Whistle, Kittery Point)

43°02.55′ N lat., 70°43.33′ W long. (Odiornes Pt., Portsmouth, New Hampshire)

(B) New Hampshire. New Hampshire state waters are exempt from the minimum number of traps per trawl requirement in paragraph (c)(2)(iv) of this section. Harbor waters landward of the following lines are exempt from all the regulations in this section;

Table 5 to Paragraph (a)(3)(ii)(B)

A line from 42°53.691′ N lat., 70°48.516′ W long. to 42°53.516′ N lat., 70°48.748′ W long. (Hampton Harbor)

A line from 42°59.986′ N lat., 70°44.654′ W long. to 42°59.956′ N, 70°44.737′ W long. (Rye Harbor)

(C) Rhode Island. Rhode Island state waters are exempt from the minimum number of traps per trawl requirement in paragraph (c)(2)(iv) of this sectioN Harbor waters landward of the following lines are exempt from all the regulations in this section;

Table 6 to Paragraph (a)(3)(ii)(C)

A line from 41°22.441′ N lat., 71°30.781′ W long. to 41°22.447′ N lat., 71°30.893′ W long. (Pt. Judith Pond Inlet)

A line from 41°21.310′ N lat., 71°38.300′ W long. to 41°21.300′ N lat., 71°38.330′ W long. (Ninigret Pond Inlet)

A line from 41°19.875′ N lat., 71°43.061′ W long. to 41°19.879′ N lat., 71°43.115′ W long. (Quonochontaug Pond Inlet)

A line from 41°19.660′ N lat., 71°45.750′ W long. to 41°19.660′ N lat., 71°45.780′ W long. (Weekapaug Pond Inlet)

A line from 41°26.550′ N lat., 71°26.400′ W long. to 41°26.500′ N lat., 71°26.505′ W long. (Pettaquamscutt Inlet)

(D) New York. The regulations in this section do not apply to waters landward of a line that follows the territorial sea baseline through Block Island Sound (Watch Hill Point, RI, to Montauk Point, NY);

(E) Massachusetts. The regulations in this section do not apply to waters landward of the first bridge over any embayment, harbor, or inlet in Massachusetts. The following Massachusetts state waters are exempt from the minimum number of traps per trawl requirement in paragraph (c)(2)(iv) of this section:

(1) Exempt waters of Massachusetts Bay and Outer Cape. Heading From the New Hampshire border to 70° W longitude south of Cape Cod, waters in EEZ Nearshore Management Area 1 and the Outer Cape Lobster Management Area (as defined in the American Lobster Fishery regulations under § 697.18 of this title), from the shoreline to 3 nautical miles from shore, and including waters of Cape Cod Bay southeast of a straight line connecting 41° 55.8′ N lat., 70°8.4′ W long. and 41°47.2′ N lat., 70°19.5′ W long.; and

(2) Exempt waters of southern Massachusetts. Heading From 70° W longitude south of Cape Cod to the Rhode Island border, all Massachusetts state waters in EEZ Nearshore Management Area 2 and the Outer Cape Lobster Management Area (as defined in the American Lobster Fishery regulations 50 CFR 697.18), including Federal waters of Nantucket Sound west of 70° W long.;

(F) South Carolina. The regulations in this section do not apply to waters landward of a line connecting the following points from 32°34.717′ N lat., 80°08.565′ W long. to 32°34.686′ N lat., 80°08.642′ W long. (Captain Sams Inlet);

(4) Sinking groundline exemption. The fisheries regulated under this section are exempt from the requirement to have groundlines composed of sinking line if their groundline is at a depth equal to or greater than 280 fathoms (1,680 feet or 512.1 m);

(5) Net panel weak link and anchoring exemption. The anchored gillnet fisheries regulated under this section are exempt from the requirement to install weak links in the net panel and anchor each end of the net string if the float-line is at a depth equal to or greater than 280 fathoms (1,680 feet or 512.1 m); and

(6) Island buffer. Those fishing in waters within 1/4 nautical miles of the following Maine islands are exempt from the minimum number of traps per trawl requirement in paragraph (c)(2)(iv) of this section: Monhegan Island, Matinicus Island Group (Metinic Island, Small Green Island, Large Green Island, Seal Island, Wooden Ball Island, Matinicus Island, Ragged Island), and Isles of Shoals Island Group (Duck Island, Appledore Island, Cedar Island, Smuttynose Island).

(b) Gear marking requirements—(1) Specified areas. Fishermen permitted by Maine, New Hampshire, Massachusetts, Rhode Island, and NMFS to fish for lobster and Jonah crab using trap/pot gear in the Northeast Region will follow the color marking requirements for Federal waters as indicated in paragraph (b)(2) of this section and, except for when fishing in LMA3, will follow the color code scheme assigned to their state, indicated in paragraph (b)(3) of this section. For all other trap/pot and gillnet gear, excluding shark gillnet, the following areas are specified for gear marking purposes: Northern Inshore State Trap/Pot Waters, Cape Cod Bay Restricted Area, Massachusetts Restricted Area, Stellwagen Bank/Jeffreys Ledge Restricted Area, Northern Nearshore Trap/Pot Waters Area, Great South Channel Restricted Trap/Pot Area, Great South Channel Restricted Gillnet Area, Great South Channel Sliver Restricted Area, Southern Nearshore Trap/Pot Waters Area, Offshore Trap/Pot Waters Area, Other Northeast Gillnet Waters Area, Mid/South Atlantic Gillnet Waters Area, Other Southeast Gillnet Waters Area, Southeast U.S. Restricted Areas, and Southeast U.S. Monitoring Area;

(i) Jordan Basin. The Jordan Basin Restricted Area is bounded by the following points connected by straight lines in the order listed:

Table 7 to Paragraph (b)(1)(i)

Point	N Lat.	W Long.
JBRA1	43°15′	68°50′
JBRA2	43°35′	68°20′
JBRA3	43°25′	68°05′
JBRA4	43°05′	68°20′
JBRA5	43°05′	68°35′
JBRA1	43°15′	68°50′

(ii) Jeffreys Ledge Restricted Area. The Jeffreys Ledge Restricted Area is bounded by the following points connected by a straight line in the order listed:

Table 8 to Paragraph (b)(1)(ii)

Point	N Lat.	W Long.
JLRA1	43°15′	70°25′
JLRA2	43°15′	70°00′
JLRA3	42°50′	70°00′
JLRA4	42°50′	70°25′
JLRA1	43°15′	70°25′

(2) Markings. All specified gear in specified areas must be marked with the color code shown in paragraph (b)(3) of this section. The color must be permanently marked on or along the rope or ropes specified under paragraphs (b)(2)(i) through (iv) of this section. Each colored mark must be clearly visible when the gear is hauled or removed from the water, including if the color of the rope is the same as or similar to the respective color code;

(i) Northeast Region lobster and Jonah crab buoy line markings. Beginning May 1, 2022, for all Federal and state Northeast Region lobster and Jonah crab trap/pot gear regulated under this section, the buoy lines must be marked with a solid mark at least 36 inches (91.4 cm) in length within 2 fathoms (3.7 m) of the surface buoy. When fishing in Federal waters, all Northeast Region lobster and Jonah crab trap/pot buoy lines must have an additional green mark of at least 12 inches (30.5 cm) in length no more than 6 inches (15.2 cm) from the 36-inch (91.4 cm) mark. These long marks within 2 fathoms (3.7 m) of the buoy must be solid marks that may be applied with dyed, painted, or heat-shrink tubing, insertion of a colored rope or braided sleeve, or the line may be marked as approved in writing by the Greater Atlantic Regional Administrator. When fishing in state waters, the buoy line below the surface system must be marked by the principal port state color at least two additional times (top half, bottom half) and each mark must at least total 12 inches (30.5 cm) for a total of at least three marks in state waters. For dual permitted vessels, state regulations will determine whether green Federal markings in the surface system and buoy line below the surface system can remain on gear being fished in state waters. When in Federal waters, the buoy line below the surface system must be marked at least three additional times (top, middle, and bottom) with the state or LMA 3 specific color, and each mark must total at least 12 inches (30.5 cm) in length. An additional green mark of at least 12 inches (30.5 cm) in length denoting Northeast Region Federal waters must be placed within 6 inches (15.2 cm) of each area-specific colored mark for a total of at least eight marks in Federal waters. In marking or affixing the color code(s) for the 1-foot buoy line marks for gear regulated under this paragraph (b)(2)(i), the line may be: Dyed; painted, marked with thin colored whipping line, thin colored plastic, or heat-shrink tubing; spliced in insertion of a colored rope or braided sleeve or other material, or a thin line may be woven into or through the line; or the line may be marked as approved in writing by the Greater Atlantic Regional Administrator. An outreach guide illustrating the techniques for marking gear is available from the Greater Atlantic Regional Administrator upon request and posted on the Atlantic Large Whale Take Reduction Plan website at Fisheries.NOAA.gov/ALWTRP;

(ii) Other buoy line markings. For all other trap/pot and gillnet gear regulated under this section, the buoy line must be marked at least three times (top, middle, bottom) and each mark must total at least 12 inches (30.5 cm) in length. If the mark consists of two colors, then each color mark may be at least 6 inches (15.2 cm) for a total mark of 12 inches (30.5 cm). In marking or affixing the color code for gear regulated under this paragraph (b)(2)(ii), the line may be: Dyed, painted, marked with thin colored whipping line, thin colored plastic, or heat-shrink tubing, spliced in insertion of a colored rope or braided sleeve or other material, or a thin line may be woven into or through the line, or the line may be marked as approved in writing by the Greater Atlantic Regional Administrator. An outreach guide illustrating the techniques for marking gear is available from the Greater Atlantic Regional Administrator upon request and posted on the Atlantic Large Whale Take Reduction Plan website at Fisheries.NOAA.gov/ALWTRP;

(iii) Net panel markings. Shark gillnet gear net panels in the Southeast U.S. Restricted Area S, Southeast U.S. Monitoring Area and Other Southeast Gillnet Waters are required to be marked. The net panel must be marked along both the floatline and the leadline at least once every 100 yards (91.4 m);

(iv) Surface buoy markings. Trap/pot and gillnet gear regulated under this section must mark all surface buoys to identify the vessel or fishery with one of the following: The owner's motorboat registration number, the owner's U.S. vessel documentation number, the Federal commercial fishing permit number, or whatever positive identification marking is required by the vessel's home-port state. When marking of surface buoys is not already required by state or Federal regulations, the letters and numbers used to mark the gear to identify the vessel or fishery must be at least 1 inch (2.5 cm) in height in block letters or Arabic numbers in a color that contrasts with the background color of the buoy. An outreach guide illustrating the techniques for marking gear is available from the Greater Atlantic Regional Administrator upon request and posted on the Atlantic Large Whale Take Reduction Plan website Fisheries.NOAA.gov/ALWTRP;

(3) Color code. Gear must be marked with the appropriate colors to designate gear types and areas as follows:

Table 9 to Paragraph (b)(3)

Color code scheme
Plan management area	Color
Northeast Region, Lobster and Jonah Crab Trap/Pot Gear, Applicable beginning May 1, 2022
Trawls fished by vessels permitted by the state of Maine and with a principal port identified in Maine when fished in state waters	Purple.
Trawls fished by vessels permitted by the state of Maine and NMFS, with a principal port identified in Maine when fished in Federal LMA 1 waters *	Purple, Green.
Trawls fished by vessels permitted by the state of New Hampshire and with a principal port identified in New Hampshire when fished in state waters	Yellow.
Trawls fished by vessels permitted by the state of New Hampshire and NMFS, with a principal port identified in New Hampshire when fished in Federal LMA 1 waters *	Yellow, Green.
Trawls fished by vessels permitted by the state of Massachusetts and with a principal port identified in Massachusetts when fished in state waters	Red.
Trawls fished by vessels permitted by the state of Massachusetts and NMFS with a principal port identified in Massachusetts when fished in Federal waters of LMA 1, OC, LMA 2 (including 2/3 overlap) *	Red, Green.
Trawls fished by vessels permitted by the state of Rhode Island and with a principal port identified in Rhode Island when fished in state waters	Silver/Gray.
Trawls fished by vessels permitted by the state of Rhode Island and NMFS, with a principal port identified in Rhode Island when in Federal waters of LMA 2 (including 2/3 overlap) *	Silver/Gray, Green.
Trawls fished in the Northeast EEZ Offshore Management Area 3 (LMA3) excluding the 2/3 overlap	Black, Green.
Northeast Region, Other Trap/Pot gear
Massachusetts Restricted Area	Red.
Northern Nearshore	Red.
Northern Inshore State	Red.
Stellwagen Bank/Jeffreys Ledge Restricted Area	Red.
Great South Channel Restricted Area overlapping with LMA 2 and/or Outer Cape	Red.
Exempt Rhode Island state waters (single traps)	Red and Blue.
Exempt Massachusetts state waters in LMA 1 (single traps)	Red and White.
Exempt Massachusetts state waters in LMA 2 (single traps)	Red and Black.
Exempt Massachusetts state waters in Outer Cape (single traps)	Red and Yellow.
Isles of Shoals, ME (single traps)	Red and Orange.
Great South Channel Restricted Area overlapping with LMA 2/3 and/or LMA 3	Black.
Jordan Basin	Black and Purple (LMA 3), Red and Purple (LMA 1)
Jeffreys Ledge	Red and Green.
Trap/Pot Gear
Southern Nearshore	Orange.
Southeast Restricted Area North (state Waters)	Blue and Orange.
Southeast Restricted Area North (Federal Waters)	Green and Orange.
Offshore	Black.
Gillnet excluding shark gillnet
Cape Cod Bay Restricted Area	Green.
Stellwagen Bank/Jeffreys Ledge Restricted Area	Green.
Great South Channel Restricted Area	Green.
Great South Channel Restricted Sliver Area	Green.
Other Northeast Gillnet Waters	Green.
Jordan Basin	Green and Yellow.
Jeffreys Ledge	Green and Black.
Mid/South Atlantic Gillnet Waters	Blue.
Southeast U.S. Restricted Area South	Yellow.
Other Southeast Gillnet Waters	Yellow.
Shark Gillnet (with webbing of 5″ or greater)
Southeast U.S. Restricted Area South	Green and Blue.
Southeast Monitoring Area	Green and Blue.
Other Southeast Waters	Green and Blue.

* For dual permitted vessels, state regulations will determine whether green marks can remain on gear being fished in state waters.

(c) Restrictions applicable to trap/pot gear in regulated waters—(1) Universal trap/pot gear requirements. In addition to the gear marking requirements listed in paragraph (b) of this section and the area-specific measures listed in paragraphs (c)(2) through (14) of this section, all trap/pot gear in regulated waters, including the Northern Inshore State Trap/Pot Waters Area, must comply with the universal gear requirements listed in paragraphs (c)(1)(i) through (iii) of this section; 1

1 Fishermen are also encouraged to maintain their buoy lines to be as knot-free as possible. Splices are considered to be less of an entanglement threat and are thus preferable to knots.

(i) No buoy line floating at the surface. No person or vessel may fish with trap/pot gear that has any portion of the buoy line floating at the surface at any time when the buoy line is directly connected to the gear at the ocean bottom. If more than one buoy is attached to a single buoy line or if a high flyer and a buoy are used together on a single buoy line, floating line may be used between these objects;

(ii) No wet storage of gear. Trap/pot gear must be hauled out of the water at least once every 30 days; and

(iii) Groundlines. All groundlines must be composed entirely of sinking line. The attachment of buoys, toggles, or other floatation devices to groundlines is prohibited.

(2) Area specific gear requirements. Trap/pot gear must be set according to the requirements outlined in paragraphs (c)(2)(i) through (iii) of this section and in the table to paragraph (c)(2)(iv) of this section;

(i) Single traps and multiple-trap trawls. All traps must be set according to the configuration outlined in the table to paragraph (c)(2)(iv) of this section. Trawls up to and including five traps must only have one buoy line unless specified otherwise in the table to paragraph (c)(2)(iv) of this section;

(ii) Buoy line weak links. With the exception of Northeast Region lobster and Jonah crab trap/pot trawls, all buoys, flotation devices and/or weights (except traps/pots, anchors, and leadline woven into the buoy line), such as surface buoys, high flyers, radar reflectors, subsurface buoys, toggles, window weights, etc., must be attached to the buoy line with a weak link placed either as close to each individual buoy, flotation device and/or weight as operationally feasible, or at the base of the surface system where the surface system attaches to the single buoy line, and that meets the following specifications;

(A) Weak link breaking strengths. The breaking strength of the weak links must not exceed the breaking strength listed in paragraph (c)(2)(iv) of this section for a specified management area;

(B) Approved weak links. The weak link must be chosen from the following list approved by NMFS: Swivels, plastic weak links, rope of appropriate breaking strength, hog rings, rope stapled to a buoy stick, or other materials or devices approved in writing by the Greater Atlantic Regional Administrator. An outreach guide illustrating the techniques for making weak links is available from the Greater Atlantic Regional Administrator upon request and posted on the Atlantic Large Whale Take Reduction Plan website Fisheries.NOAA.gov/ALWTRP; and

(C) Clean breaks. Weak links must break cleanly leaving behind the bitter end of the line. The bitter end of the line must be free of any knots when the weak link breaks. Splices are not considered to be knots for the purposes of this paragraph (c)(2)(ii)(C);

(iii) Weak buoy lines and weak insertion devices. Beginning May 1, 2022, all lobster and Jonah crab trap/pot buoy lines in the management areas and configurations outlined in the table to paragraph (c)(2)(iv) of this section must use weak line or must insert weak devices along the buoy line as described in the table to paragraph (c)(2)(iv). The weak line and weak insert devices must meet the following specifications;

(A) Breaking strength. The breaking strength of the weak buoy lines and weak insertion devices must not exceed 1,700 lb (771 kgs);

(B) Approved devices and distance between weak insertions. Weak insertion devices must be inserted in the specified intervals from the surface system and must be devices chosen from the following list approved by NMFS, including any rope no thinner than 5/16 inch (8 mm) diameter that is engineered to break at 1,700 lb (771 kg) or less in a color contrasting with the primary buoy line and 3 feet (91.4 cm) or longer spliced on either end into the primary buoy line. Splices that achieve nearly the manufactured breaking strength include but are not limited to: Three or more tuck splices, an eye to loop with 3 or more tuck splices, or a butt splice. A 3-foot long hollow braided sleeve such as those known as the South Shore Sleeve installed over a parted buoy line is approved. A plastic weak link engineered to break at 1700 lb (771 kg) or less in a color that contrasts with the buoy line and with the breaking strength imprinted on the weak link is approved. The Greater Atlantic Regional Administrator will approve other materials, devices, or configurations inserted according to specifications approved in writing by the Greater Atlantic Regional Administrator. An outreach guide illustrating the techniques for making weak insert devices is available from the Greater Atlantic Regional Administrator upon request and posted on the Atlantic Large Whale Take Reduction Plan website Fisheries.NOAA.gov/ALWTRP; and

(C) Clean breaks. Weak line and weak inserts must break cleanly leaving behind the bitter end of the line. The bitter end of the line must be free of any knots when the weak insert breaks. Splices are not considered to be knots for the purposes of this paragraph (c)(2)(iii)(D).

(iv) Table of area specific trap/pot gear requirements.

Table 10 to Paragraph (c)(2)(iv)

Mgmt area; location	Minimum number traps/trawl	Minimum number of weak rope or weak insertion configuration
Northeast Region Lobster and Jonah Crab Trap/Pot, Applicable beginning May 1, 2022
Northern Inshore State; Maine Zones A, B, F, G exempt waters to 3 miles	3 (1 buoy line)	Weak line for the top 50 percent of the buoy line or one weak insertion device at 50 percent buoy line length from top.
Northern Inshore State; Maine Zones C, D, and E exempt waters to 3 miles	2 (1 buoy line) or 4 (2 buoy lines)	Weak line for the top 50 percent of the buoy line or one weak insertion device at 50 percent buoy line length from top.
Northern Nearshore: Maine Zone A East 3 to 12 miles	10 (1 buoy line) or 20 (2 buoy lines)	Weak line for the top 33 percent of the buoy line or one weak insertion device at 33 percent buoy line length from top.
Northern Nearshore: Maine Zone A West 3 to 6 miles	4 (1 buoy line) or 8 (2 buoy lines)	Weak line for the top 50 percent of the buoy line or two weak insertion devices, one at 25 percent and one at 50 percent buoy line length from top.
Northern Nearshore: Maine Zone A West 6 to 12 miles	8 (1 buoy line) or 15 (2 buoy lines)	Weak line for the top 50 percent of the buoy line or two weak insertion devices, one at 25 percent and one at 50 percent buoy line length from top.
Northern Nearshore: Maine Zone B 3 to 6 miles	5 (1 buoy line)	Weak line for the top 50 percent of the buoy line or two weak insertion devices, one at 25 percent and one at 50 percent buoy line length from top.
Northern Nearshore: Maine Zone C, D, E 3 to 6 miles	5 (1 buoy line) or 10 (2 buoy lines)	Weak line for the top 50 percent of the buoy line or two weak insertion devices, one at 25 percent and one at 50 percent buoy line length from top.
Northern Nearshore: Maine Zone F and G 3 to 6 miles	5 (1 buoy line) or 10 (2 buoy lines)	Weak line for the top 33 percent of the buoy line or one weak insertion device at 33 percent buoy line length from top.
Northern Nearshore: Maine Zone B, D, and E 6 to 12 miles	5 (1 buoy line) or 10 (2 buoy lines)	Weak line for the top 50 percent of the buoy line or two weak insertion devices, one at 25 percent and one at 50 percent buoy line length from top.
Northern Nearshore: Maine Zone C 6 to 12 miles	10 (1 buoy line) or 20 (2 buoy lines)	Weak line for the top 50 percent of the buoy line or two weak insertion devices, one at 25 percent and one at 50 percent buoy line length from top.
Northern Nearshore: Maine Zone F 6 to 12 miles	5 (1 buoy line) or 10 (2 buoy lines)	Weak line for the top 33 percent of the buoy line or one weak insertion device at 33 percent buoy line length from top.
Northern Nearshore: Maine Zone G 6 to 12 miles	10 (1 buoy line) or 20 (2 buoy lines)	Weak line for the top 33 percent of the buoy line or one weak insertion device at 33 percent buoy line length from top.
Northern Inshore State and Massachusetts Restricted Area; Massachusetts State Waters ²	No minimum number of traps per trawl. Trawls up to and including 3 or fewer traps must only have one buoy line	Weak inserts every 60 feet (18.3 m) in top 75 percent of line or full weak line through top 75 percent of line.
Northern Inshore State and Massachusetts Restricted Area; Other Massachusetts State Waters	2 (1 buoy line) Trawls up to and including 3 or fewer traps must only have one buoy line	Weak inserts every 60 feet (18.3 m) in top 75 percent of line or full weak line through top 75 percent of line.
Northern Inshore State; New Hampshire State Waters	No minimum trap/trawl	Weak line for the top 50 percent of the buoy line or one weak insertion device at 50 percent buoy line length from top.
Northern Nearshore; New Hampshire and Massachusetts (3-6 miles)	10	Weak line for the top 50 percent of the buoy line or two weak insertion devices, one at 25 percent and one at 50 percent buoy line length from top.
Northern Nearshore, Massachusetts Restricted Area, and Stellwagen Bank/Jeffreys Ledge Restricted Area; LMA 1 (6-12 miles)	15	Weak line for the top 50 percent of the buoy line or two weak insertion devices, one at 25 percent and one at 50 percent buoy line length from top.
Northern Nearshore and LMA1 Restricted Area; LMA1 (12+ miles)	25	Weak line for the top 33 percent of the buoy line or one weak insertion device at 33 percent buoy line length from top.
Northern Inshore State, Massachusetts Restricted Area, and Massachusetts South Island Restricted Area; OC and LMA1/OC Overlap(0-3 miles)	No minimum number of traps per trawl	Weak inserts every 60 ft (18.3 m) in top 75 percent of line or full weak line through top 75 percent of line.
Northern Nearshore and Massachusetts Restricted Area; OC (3-12 miles)	15	Weak line for the top 50 percent of the buoy line or two weak insertion devices, one at 25 percent and one at 50 percent buoy line length from top.
Northern Nearshore and Great South Channel Restricted Area; OC (12+ miles)	20	Weak line for the top 33 percent of the buoy line or one weak insertion device at 33 percent buoy line length from top.
Northern Inshore State; RI State Waters	No minimum number of traps per trawl	Weak inserts every 60 feet (18.3 m) in top 75 percent of line or full weak line through top 75 percent of line.
Northern Nearshore; LMA 2 (3-12 miles)	10	Weak inserts every 60 feet (18.3 m) in top 75 percent of line or full weak line through top 75 percent of line.
Northern Nearshore, Great South Channel Restricted Area, and Massachusetts South of Island Restricted Area; LMA 2 (12+ miles)	20	Weak inserts every 60 feet (18.3 m) in top 75 percent of line or full weak line through top 75 percent of line.
Offshore, Great South Channel Restricted Area, and Massachusetts South Island Restricted Area; LMA 2/3 Overlap (12+ miles)	20	Weak inserts every 60 feet (18.3 m) in top 75 percent of line or full weak line through top 75 percent of line.
Northeast Region Offshore waters including Great South Channel Restricted Area, and Massachusetts South Island Restricted Area, with the exception of the Georges Basin and South Georges 50 Fathom Restricted Areas; LMA 3 including LMA3-only vessels fishing in 2/3 overlap	45	Weak line for the top 75 percent of one buoy line.
Northeast Region Offshore waters Georges Basin Restricted Area	50	Weak line for the top 75 percent of the buoy line.
Northeast Region Offshore waters South Georges 50 Fathom Restricted Area	35	Weak line for the top 75 percent of the buoy line.
Other Trap/Pot
Northern Inshore State; Maine State and Pocket Waters ¹	2 (1 buoy line)	≤600 lb.
Northern Nearshore; Maine Zones A-G (3-6 miles) ¹	3 (1 buoy line)	≤600 lb.
Northern Nearshore; Maine Zones A-C (6-12 miles) ¹	5 (1 buoy line)	≤600 lb.
Northern Nearshore; Maine Zones D-G (6-12 miles) ¹	10	≤600 lb.
Northern Nearshore, Offshore, and LMA1 Restricted Area; Maine Zones A-E (12+ miles)	15	≤600 lb (≤1500 lb in offshore, 2,000 lb if red crab trap/pot).
Northern Nearshore, Offshore, and LMA1 Restricted Area; Maine Zones F-G (12+ miles)	15 (Mar 1-Oct 31) 20 (Nov 1-Feb 28/29)	≤600 ls (≤1500 lb in offshore, 2,000 ls if red crab trap/pot).
Northern Inshore State and Massachusetts Restricted Area; Massachusetts State Waters ²	No minimum number of traps per trawl. Trawls up to and including 3 or fewer traps must only have one buoy line	≤600 lb.
Northern Inshore State, Massachusetts Restricted Area, and Massachusetts South Island Restricted Area; Other Massachusetts State Waters	2 (1 buoy line) Trawls up to and including 3 or fewer traps must only have one buoy line	≤600 lb.
Northern Inshore State; New Hampshire State Waters	No minimum number of traps per trawl	≤600 lb.
Northern Nearshore and Massachusetts Restricted Area and Stellwagen Bank/Jeffreys Ledge Restricted Area; LMA 1 (3-12 miles)	10	≤600 lb.
Northern Nearshore and LMA1 Restricted Area; LMA 1 (12+ miles)	20	≤600 lb.
Northern Inshore State and Massachusetts Restricted Area; LMA1/OC Overlap (0-3 miles)	No minimum number of traps per trawl	≤600 lb.
Northern Inshore State and Massachusetts Restricted Area; OC (0-3 miles)	No minimum number of traps per trawl	≤600 lb.
Northern Nearshore and Massachusetts Restricted Area; OC (3-12 miles)	10	≤600 lb.
Northern Nearshore and Great South Channel Restricted Area; OC (12+ miles)	20	≤600 lb.
Northern Inshore State; Rhode Island State Waters	No minimum number of traps per trawl	≤600 lb.
Northern Nearshore, and Massachusetts South Island Restricted Area; LMA 2 (3-12 miles)	10	≤600 lb.
Northern Nearshore, Great South Channel Restricted Area; LMA 2 (12+ miles)	20	≤600 lb.
Northeast Offshore and Great South Channel Restricted Area, and Massachusetts South Island Restricted Area; LMA 2/3 Overlap (12+ miles)	20	≤1500 lb (2,000 lb if red crab trap/pot).
Northeast Offshore waters, Great South Channel Restricted Area, and Massachusetts South Island Restricted Area; LMA 3 (12+ miles)	20	≤1500 lb (2,000 lb if red crab trap/pot).
Southern Nearshore; LMA 4,5,6	No minimum number of traps per trawl	≤600 lb.
Southeast U.S. Restricted Area North ³ Florida State Waters	1	≤200 lb.
Southeast U.S. Restricted Area North; ³ Georgia State Waters	1	≤600 lb.
Southeast U.S. Restricted Area North; ³ South Carolina State Waters	1	≤600 lb.
Southeast U.S. Restricted Area North; ³ Federal Waters off Florida, Georgia, South Carolina	1	≤600 lb.

¹ The 6-mile line, pocket waters, and Maine Zones are defined in paragraphs (a)(2)(iii) through (v) of this section.

² Massachusetts State waters as defined as paragraph (a)(3)(ii)(E) of this section.

³ See paragraph (f)(1) of this section for description of area.

(3) Massachusetts Restricted Area— (i) Area. The Massachusetts Restricted Area is bounded landward by the Massachusetts shoreline, from points MRA1 through MRA3 bounded seaward by the designated Massachusetts State waters boundary, and then bounded by a rhumb line connecting points MRA3 through MRA10 in order as detailed in table 11 to this paragraph (c)(3)(i);

Table 11 to Paragraph (c)(3)(i)

Point	N Lat.	W Long.
MRA1	42°52.32′	70°48.98′
MRA2	42°52.58′	70°43.94′
MRA3	42°39.77′	70°30′
MRA4	42°30′	70°30′
MRA5	42°30′	69°45′
MRA6	41°56.5′	69°45′
MRA7	41°21.5′	69°16′
MRA8	41°15.3′	69°57.9′
MRA9	41°20.3′	70°00′
MRA10	41°40.2′	70°00′

(ii) Closure to fishing with buoy lines. From February 1 to April 30, it is prohibited to fish with, set, or possess trap/pot gear in the area in this paragraph (c)(3)(i) of this section unless it is fished without buoy lines or with buoy lines that are stored on the bottom until it can be remotely released for hauling, or it is stowed in accordance with § 229.2 of this chapter. Authorizations for fishing without buoy lines must be obtained if such fishing would not be in accordance with surface marking requirements of §§ 697.21 and 648.84 of this title or other applicable fishery management regulations. The minimum number of trap/trawl gear configuration requirements specified in paragraph (c)(2)(iv) of this section remain in effect unless an exemption to those requirements is authorized.

(iii) Area-specific gear or vessel requirements. From May 1 through January 31, no person or vessel may fish with or possess trap/pot gear in the Massachusetts Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, and the area-specific requirements listed in paragraph (c)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(4) South Island Restricted Area—(i) Area. The South Island Restricted Area is bounded by the following points connected by rhumb lines in the order listed, and bounded on the north by the shoreline of Nantucket, Massachusetts.

Table 12 to Paragraph (c)(4)(i)

Point	N lat.	W long.
SIRA1	41°20.00′ N	71°19.00′ W
SIRA2	41°20.00′ N	69°30.00′ W
SIRA3	40°30.00′ N	69°30.00′ W
SIRA4	40°30.00′ N	71°19.00′ W
SIRA	41°20.00′ N	71°19.00′ W

(ii) Closure to fishing with buoy lines. From February 1 to April 30, it is prohibited to fish with, set, or possess trap/pot gear in the area in paragraph (c)(4)(i) of this section unless it is fished without buoy lines or with buoy lines that are stored on the bottom until they can be remotely released for hauling, or the trap/pot gear is stowed in accordance with § 229.2. Authorizations for fishing without buoy lines must be obtained if such fishing would not be in accordance with surface marking requirements of 50 CFR 697.21 and 648.84. The minimum number of trap/trawl gear configuration requirements specified in paragraph (c)(2)(iv) of this section remain in effect unless an exemption to those requirements is authorized.

(iii) Area-specific gear or vessel requirements. From May 1 through January 31, no person or vessel may fish with or possess trap/pot gear in the Massachusetts South Island Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, and the area-specific requirements listed in paragraph (c)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(5) Great South Channel Restricted Trap/Pot Area—(i) Area. The Great South Channel Restricted Trap/Pot Area consists of the area bounded by the following points.

Table 13 to Paragraph (c)(5)(i)

Point	N lat.	W long.
GSC1	41°40′	69°45′
GSC2	41°0′	69°05′
GSC3	41°38′	68°13′
GSC4	42°10′	68°31′
GSC1	41°40′	69°45′

(ii) Closure to fishing with buoy lines. From April 1 through June 30, it is prohibited to fish with, set, or possess trap/pot gear in the area in paragraph (c)(5)(i) of this section unless it is fished without buoy lines or with buoy lines that are stored on the bottom until they can be remotely released for hauling, or the trap/pot gear is stowed in accordance with § 229.2. Authorizations for fishing without buoy lines must be obtained if such fishing would not be in accordance with surface marking requirements of 50 CFR 697.21 and 648.84.

(iii) Area-specific gear or vessel requirements. From July 1 through March 31, no person or vessel may fish with or possess trap/pot gear in the Great South Channel Restricted Trap/Pot Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, and the area-specific requirements listed in paragraph (c)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(6) Lobster Management Area One Restricted Area—(i) Area. The Lobster Management Area One Restricted Area (LMRA1) is bounded by the following points connected by rhumblines in the order listed.

Table 14 to Paragraph (c)(6)(i)

Point	N lat.	W long.
LMA1RA 1	43°06′	69°36.77′
LMA1RA 2	43°44′	68°21.6′
LMA1RA 3	43°32.68′	68°17.27′
LMA1RA 4	42°53.52′	69°32.16′
LMA1RA 1	43°06′	69°36.77′

(ii) Restrictions to fishing with buoy lines. From October 1 to January 31, it is prohibited to fish with, set, or possess trap/pot gear in the area in paragraph (c)(6)(i) of this section unless it is fished without buoy lines or with buoy lines that are stored on the bottom until they can be remotely released for hauling, or the trap/pot gear is stowed in accordance with § 229.2. Authorizations for fishing without buoy lines must be obtained if such fishing would not be in accordance with surface marking requirements of 50 CFR 697.21 and 648.84. The minimum number of trap/trawl gear configuration requirements specified in paragraph (c)(2)(iv) of this section remain in effect unless an exemption to those requirements is authorized.

(iii) Area-specific gear or vessel requirements. From February 1 through September 30, no person or vessel may fish with or possess trap/pot gear in the LMA 1 Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, and the area-specific requirements listed in paragraph (c)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(7) Stellwagen Bank/Jeffreys Ledge Restricted Area—(i) Area. The Stellwagen Bank/Jeffreys Ledge Restricted Area includes all Federal waters of the Gulf of Maine, except those designated as the Massachusetts Restricted Area in paragraph (c)(3) of this section, that lie south of 43°15′ N lat. and west of 70°00′ W long.

(ii) Year round area-specific gear or vessel requirements. No person or vessel may fish with or possess trap/pot gear in the Stellwagen Bank/Jeffreys Ledge Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, and the area-specific requirements listed in paragraph (c)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(8) Georges Basin Restricted Area—(i) Area. The Georges Basin Restricted Area (GBRA) referred to in paragraph (c)(2)(iv) of this section is bounded by rhumb lines connecting the following points in the order listed in table 15 to paragraph (c)(8)(i).

Table 15 to Paragraph (c)(8)(i)

Point	N lat.	W long.
GBRA 1	42°03.00′	67°40.02′
GBRA 2	42°30.00′	67°40.02′
GBRA 3	42°30.00′	67°27.00′
GBRA 4	42°09.30′	67°08.70′
GBRA 1	42°03.00′	67°40.02′

(ii) [Reserved]

(iii) Area-specific gear or vessel requirements. Beginning May 1 2022, no person or vessel may fish with or possess trap/pot gear in the Georges Basin Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, and the area-specific requirements listed in paragraph (c)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(9) South Georges 50 Fathom Restricted Area—(i) Area. The South Georges 50 Fathom Restricted Area curve line referred to in paragraph (c)(2)(iv) of this section is an area bounded in the south by the 40 degree southern border of the Northeast Region, bounded seaward by the EEZ, and bounded in the north by rhumb lines connecting the following points in the order listed in table 16 to paragraph (c)(9)(i).

Table 16 to Paragraph (c)(9)(i)

Point	N lat.	W long.
SGRA 1	40°00.00′	71°49.86′
SGRA 2	40°06.47′	71°24.69′
SGRA 3	40°06.49′	71°24.62′
SGRA 4	40°20.82′	71°03.52′
SGRA 5	40°20.89′	71°03.42′
SGRA 6	40°21.16′	70°35.17′
SGRA 7	40°21.16′	70°35.02′
SGRA 8	40°16.84′	70°07.34′
SGRA 9	40°16.81′	70°07.17′
SGRA 10	40°09.92′	69°40.43′
SGRA 11	40°09.87′	69°40.25′
SGRA 12	40°14.72′	69°12.77′
SGRA 13	40°14.74′	69°12.63′
SGRA 14	40°19.83′	68°45.19′
SGRA 15	40°19.86′	68°45.05′
SGRA 16	40°31.55′	68°21.25′
SGRA 17	40°31.63′	68°21.10′
SGRA 18	40°34.09′	67°52.94′
SGRA 19	40°34.11′	67°52.76′
SGRA 20	40°38.45′	67°24.98′
SGRA 21	40°38.46′	67°24.90′
SGRA 22	40°50.05′	67°00.91′
SGRA 23	40°50.14′	67°00.73′
SGRA 24	41°00.10′	66°35.45′
SGRA 25	41°00.21′	66°35.18′
SGRA 26	41°14.84′	66°21.82′

(ii) Area-specific gear or vessel requirements. Beginning May 1, 2022, no person or vessel may fish with or possess trap/pot gear in the South Georges 50 Fathom Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, and the area-specific requirements listed in paragraph (c)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(10) Offshore Trap/Pot Waters Area—(i) Area. The Offshore Trap/Pot Waters Area includes all Federal waters of the EEZ Offshore Management Area known as Lobster Management Area 3, including the area known as the Area 2/3 Overlap and Area 3/5 Overlap as defined in the American Lobster Fishery regulations at 50 CFR 697.18, with the exception of the Great South Channel Restricted Trap/Pot Area, Southeast Restricted Area, Georges Basin Restricted Area, South Georges 50 Fathom Restricted Area, and extending south along the 100-fathom (600-ft or 182.9-m) depth contour from 35°14′ N lat. South to 27°51′ N lat., and east to the eastern edge of the EEZ.

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess trap/pot gear in the Northeast Region portion of Offshore Trap/Pot Waters Area that overlaps an area from the U.S./Canada border south to a straight line from 41°18.2′ N lat., 71°51.5′ W long. (Watch Hill Point, RI) south to 40°00′ N lat., and then east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, and the area-specific requirements listed in paragraph (c)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(iii) Seasonal area-specific gear or vessel requirements. From September 1 to May 31, no person or vessel may fish with or possess trap/pot gear in the Offshore Trap/Pot Waters Area that overlaps an area bounded on the north by a straight line from 41°18.2′ N lat., 71°51.5′ W long. (Watch Hill Point, RI) south to 40°00′ N lat. and then east to the eastern edge of the EEZ, and bounded on the south by a line at 32°00′ N lat., and east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, and area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(iv) Seasonal area-specific gear or vessel requirements. From November 15 to April 15, no person or vessel may fish with or possess trap/pot gear in the Offshore Trap/Pot Waters Area that overlaps an area from 32°00′ N lat. south to 29°00′ N lat. and east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(v) Seasonal area-specific gear or vessel requirements. From December 1 to March 31, no person or vessel may fish with or possess trap/pot gear in the Offshore Trap/Pot Waters Area that overlaps an area from 29°00′ N lat. south to 27°51′ N lat. and east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) in this section, or unless the gear is stowed as specified in § 229.2.

(11) Northern Inshore State Trap/Pot Waters Area—(i) Area. The Northern Inshore State Trap/Pot Waters Area includes the state waters of Rhode Island, Massachusetts, New Hampshire, and Maine, with the exception of Massachusetts Restricted Area and those waters exempted under paragraph (a)(3) of this section. Federal waters west of 70°00′ N lat. in Nantucket Sound are also included in the Northern Inshore State Trap/Pot Waters Area.

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess trap/pot gear in the Northern Inshore State Trap/Pot Waters Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(12) Northern Nearshore Trap/Pot Waters Area—(i) Area. The Northern Nearshore Trap/Pot Waters Area includes all Federal waters of EEZ Nearshore Management Area 1, Area 2, and the Outer Cape Lobster Management Area (as defined in the American Lobster Fishery regulations at 50 CFR 697.18), with the exception of the Great South Channel Restricted Trap/Pot Area, Massachusetts Restricted Area, Stellwagen Bank/Jeffreys Ledge Restricted Area, and Federal waters west of 70°00′ N lat. in Nantucket Sound (included in the Northern Inshore State Trap/Pot Waters Area) and those waters exempted under paragraph (a)(3) of this section.

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess trap/pot gear in the Northern Nearshore Trap/Pot Waters Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(13) Southern Nearshore Trap/Pot Waters Area—(i) Area. The Southern Nearshore Trap/Pot Waters Area includes all state and Federal waters that fall within EEZ Nearshore Management Area 4, EEZ Nearshore Management Area 5, and EEZ Nearshore Management Area 6 (as defined in the American Lobster Fishery regulations in § 697.18 of this title, and excluding the Area 3/5 Overlap), and inside the 100-fathom (600-ft or 182.9-m) depth contour line from 35°30′ N lat. south to 27°51′ N lat. and extending inshore to the shoreline or exemption line, with the exception of those waters exempted under paragraph (a)(3) of this section and those waters in the Southeast Restricted Area defined in paragraph (f)(1) of this section.

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess trap/pot gear in the Southern Nearshore Trap/Pot Waters Area that is east of a straight line from 41°18.2′ N lat., 71°51.5′ W long. (Watch Hill Point, RI) south to 40°00′ N lat., unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(iii) Seasonal area-specific gear or vessel requirements. From September 1 to May 31, no person or vessel may fish with or possess trap/pot gear in the Southern Nearshore Trap/Pot Waters Area that overlaps an area bounded on the north by a straight line from 41°18.2′ N lat., 71°51.5′ W long. (Watch Hill Point, RI) south to 40°00′ N lat. and then east to the eastern edge of the EEZ, and bounded on the south by 32°00′ N lat., and east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(iv) Seasonal area-specific gear or vessel requirements. From November 15 to April 15, no person or vessel may fish with or possess trap/pot gear in the Southern Nearshore Trap/Pot Waters Area that overlaps an area from 32°00′ N lat. south to 29°00′ N lat. and east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(v) Seasonal area-specific gear or vessel requirements. From December 1 to March 31, no person or vessel may fish with or possess trap/pot gear in the Southern Nearshore Trap/Pot Waters Area that overlaps an area from 29°00′ N lat. south to 27°51′ N lat. and east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(14) Restrictions applicable to the red crab trap/pot fishery—(i) Area. The red crab trap/pot fishery is regulated in the waters identified in paragraphs (c)(10)(i) and (c)(14)(i) of this section.

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess red crab trap/pot gear in the area identified in paragraph (c)(14)(i) of this section that overlaps an area from the U.S./Canada border south to a straight line from 41° 18.2′ N lat., 71°51.5′ W long. (Watch Hill Point, RI) south to 40°00′ N lat., and then east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(iii) Seasonal area-specific gear or vessel requirements. From September 1 to May 31, no person or vessel may fish with or possess red crab trap/pot gear in the area identified in paragraph (c)(14)(i) of this section that overlaps an area bounded on the north by a straight line from 41°18.2′ N lat., 71°51.5′ W long. (Watch Hill Point, RI) south to 40°00′ N lat. and then east to the eastern edge of the EEZ, and bounded on the south by a line at 32°00′ N lat., and east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(iv) Seasonal area-specific gear or vessel requirements. From November 15 to April 15, no person or vessel may fish with or possess red crab trap/pot gear in the area identified in paragraph (c)(14)(i) of this section that overlaps an area from 32°00′ N lat. south to 29°00′ N lat. and east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(v) Seasonal area-specific gear or vessel requirements. From December 1 to March 31, no person or vessel may fish with or possess red crab trap/pot gear in the area identified in paragraph (c)(14)(i) of this section that overlaps an area from 29°00′ N lat. south to 27°51′ N lat. and east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal trap/pot gear requirements specified in paragraph (c)(1) of this section, the area-specific requirements in paragraph (c)(2) of this section or unless the gear is stowed as specified in § 229.2.

(d) Restrictions applicable to anchored gillnet gear—(1) Universal anchored gillnet gear requirements. In addition to the area-specific measures listed in paragraphs (d)(3) through (8) of this section, all anchored gillnet gear in regulated waters must comply with the universal gear requirements listed in paragraphs (d)(1)(i) through (iii) of this section.

(i) No buoy line floating at the surface. No person or vessel may fish with anchored gillnet gear that has any portion of the buoy line floating at the surface at any time when the buoy line is directly connected to the gear at the ocean bottom. If more than one buoy is attached to a single buoy line or if a high flyer and a buoy are used together on a single buoy line, sinking and/or neutrally buoyant line must be used between these objects.

(ii) No wet storage of gear. Anchored gillnet gear must be hauled out of the water at least once every 30 days.

(iii) Groundlines. All groundlines must be composed entirely of sinking line unless exempted from this requirement under paragraph (a)(4) of this section. The attachment of buoys, toggles, or other floatation devices to groundlines is prohibited.

(2) Area specific gear restrictions. No person or vessel may fish with or possess anchored gillnet gear in Areas referenced in paragraphs (d)(3) through (8) of this section, unless that gear complies with the gear requirements specified in paragraph (d)(1) of this section, and the area specific requirements listed in paragraphs (d)(2)(i) through (iii) of this section, or unless the gear is stowed as specified in § 229.2.

(i) Buoy line weak links. All buoys, flotation devices and/or weights (except gillnets, anchors, and leadline woven into the buoy line), such as surface buoys, high flyers, sub-surface buoys, toggles, window weights, etc., must be attached to the buoy line with a weak link placed as close to each individual buoy, flotation device and/or weight as operationally feasible and that meets the following specifications:

(A) The weak link must be chosen from the following list approved by NMFS: Swivels, plastic weak links, rope of appropriate breaking strength, hog rings, rope stapled to a buoy stick, or other materials or devices approved in writing by the Assistant Administrator. A brochure illustrating the techniques for making weak links is available from the Regional Administrator, NMFS, Greater Atlantic Region upon request.

(B) The breaking strength of the weak links must not exceed 1,100 lb (499.0 kg).

(C) Weak links must break cleanly leaving behind the bitter end of the line. The bitter end of the line must be free of any knots when the weak link breaks. Splices are not considered to be knots for the purposes of this paragraph (d)(2)(i).

(ii) Net panel weak links. The breaking strength of each weak link must not exceed 1,100 lb (499.0 kg). The weak link requirements apply to all variations in panel size. All net panels in a string must contain weak links that meet one of the following two configurations unless exempted from this requirement under paragraph (a)(5) of this section:

(A) Configuration 1. (1) The weak link must be chosen from the following list approved by NMFS: Plastic weak links or rope of appropriate breaking strength. If rope of appropriate breaking strength is used throughout the floatline or as the up and down line, or if no up and down line is present, then individual weak links are not required on the floatline or up and down line. A brochure illustrating the techniques for making weak links is available from the Regional Administrator, NMFS, Greater Atlantic Region upon request; and

(2) One weak link must be placed in the center of each of the up and down lines at both ends of the net panel; and

(3) One weak link must be placed as close as possible to each end of the net panels on the floatline; and

(4) For net panels of 50 fathoms (300 ft or 91.4 m) or less in length, one weak link must be placed in the center of the floatline; or

(5) For net panels greater than 50 fathoms (300 ft or 91.4 m) in length, one weak link must be placed at least every 25 fathoms (150 ft or 45.7 m) along the floatline.

(B) Configuration 2. (1) The weak link must be chosen from the following list approved by NMFS: Plastic weak links or rope of appropriate breaking strength. If rope of appropriate breaking strength is used throughout the floatline or as the up and down line, or if no up and down line is present, then individual weak links are not required on the floatline or up and down line. A brochure illustrating the techniques for making weak links is available from the Regional Administrator, NMFS, Greater Atlantic Region upon request; and

(2) One weak link must be placed in the center of each of the up and down lines at both ends of the net panel; and

(3) One weak link must be placed between the floatline tie loops between net panels; and

(4) One weak link must be placed where the floatline tie loops attaches to the bridle, buoy line, or groundline at the end of a net string; and

(5) For net panels of 50 fathoms (300 ft or 91.4 m) or less in length, one weak link must be placed in the center of the floatline; or

(6) For net panels greater than 50 fathoms (300 ft or 91.4 m) in length, one weak link must be placed at least every 25 fathoms (150 ft or 45.7 m) along the floatline.

(iii) Anchoring systems. All anchored gillnets, regardless of the number of net panels, must be secured at each end of the net string with a burying anchor (an anchor that holds to the ocean bottom through the use of a fluke, spade, plow, or pick) having the holding capacity equal to or greater than a 22-lb (10.0-kg) Danforth-style anchor unless exempted from this requirement under paragraph (a)(5) of this section. Dead weights do not meet this requirement. A brochure illustrating the techniques for rigging anchoring systems is available from the Regional Administrator, NMFS, Greater Atlantic Region.

(3) Cape Cod Bay Restricted Area—(i) Area. The Cape Cod Bay restricted area is bounded by the following points and on the south and east by the interior shoreline of Cape Cod, Massachusetts.

Table 17 to Paragraph (d)(3)(i)

Point	N lat.	W long.
CCB1	41°46.8′	70°30′
CCB2	42°12′	70°30′
CCB3	42°12′	70°15′
CCB4	42°04.8′	70°10′

(ii) Closure. During January 1 through May 15 of each year, no person or vessel may fish with or possess anchored gillnet gear in the Cape Cod Bay Restricted Area unless the Assistant Administrator specifies gear restrictions or alternative fishing practices in accordance with paragraph (i) of this section and the gear or practices comply with those specifications, or unless the gear is stowed as specified in § 229.2. The Assistant Administrator may waive this closure for the remaining portion of the winter restricted period in any year through a notification in the Federal Register if NMFS determines that right whales have left the restricted area and are unlikely to return for the remainder of the season.

(iii) Area-specific gear or vessel requirements. From May 16 through December 31 of each year, no person or vessel may fish with or possess anchored gillnet gear in the Cape Cod Bay Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal anchored gillnet gear requirements specified in paragraph (d)(1) of this section, and the area-specific requirements listed in paragraph (d)(2) of this section, or unless the gear is stowed as specified in § 229.2.

(4) Great South Channel Restricted Gillnet Area—(i) Area. The Great South Channel Restricted Gillnet Area consists of the area bounded by lines connecting the following four points:

Table 18 to Paragraph (d)(4)(i)

Point	N lat.	W long.
GSC1	41°02.2′	69°02′
GSC2	41°43.5′	69°36.3′
GSC3	42°10′	68°31′
GSC4	41°38′	68°13′

(ii) Closure. From April 1 through June 30 of each year, no person or vessel may fish with or possess anchored gillnet gear in the Great South Channel Restricted Gillnet Area unless the Assistant Administrator specifies gear restrictions or alternative fishing practices in accordance with paragraph (i) of this section and the gear or practices comply with those specifications, or unless the gear is stowed as specified in § 229.2.

(iii) Area-specific gear or vessel requirements. From July 1 through March 31 of each year, no person or vessel may fish with or possess anchored gillnet gear in the Great South Channel Restricted Gillnet Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal anchored gillnet gear requirements specified in paragraph (d)(1) of this section, and the area-specific requirements listed in paragraph (d)(2) of this section or unless the gear is stowed as specified in § 229.2.

(5) Great South Channel Sliver Restricted Area—(i) Area. The Great South Channel Sliver Restricted Area consists of the area bounded by lines connecting the following points:

Table 19 to Paragraph (d)(5)(i)

Point	N lat.	W long.
GSCRA1	41°02.2′	69°02′
GSCRA2	41°43.5′	69°36.3′
GSCRA3	41°40′	69°45′
GSCRA4	41°00′	69°05′

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess anchored gillnet gear in the Great South Channel Sliver Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal anchored gillnet gear requirements specified in paragraph (d)(1) of this section, and the area-specific requirements listed in paragraph (d)(2) of this section or unless the gear is stowed as specified in § 229.2.

(6) Stellwagen Bank/Jeffreys Ledge Restricted Area—(i) Area. The Stellwagen Bank/Jeffreys Ledge Restricted Area includes all Federal waters of the Gulf of Maine, except those designated as the Cape Cod Bay Restricted Area in paragraph (d)(3) of this section that lie south of 43°15′ N lat. and west of 70°00′ W long.

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess anchored gillnet gear in the Stellwagen Bank/Jeffreys Ledge Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal anchored gillnet gear requirements specified in paragraph (d)(1) of this section, and the area-specific requirements listed in paragraph (d)(2) of this section or unless the gear is stowed as specified in § 229.2.

(7) Other Northeast Gillnet Waters Area—(i) Area. The Other Northeast Gillnet Waters Area consists of all state and Federal U.S. waters from the U.S./Canada border to Long Island, NY, at 72°30′ W long. south to 36°33.03′ N lat. and east to the eastern edge of the EEZ, with the exception of the Cape Cod Bay Restricted Area, Stellwagen Bank/Jeffreys Ledge Restricted Area, Great South Channel Restricted Gillnet Area, Great South Channel Sliver Restricted Area, and exempted waters listed in paragraph (a)(3) of this section.

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess anchored gillnet gear in the Other Northeast Gillnet Waters Area that overlaps an area from the U.S./Canada border south to a straight line from 41°18.2′ N lat., 71°51.5′ W long. (Watch Hill Point, RI) south to 40°00′ N lat. and then east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal anchored gillnet gear requirements specified in paragraph (d)(1) of this section, and the area-specific requirements listed in paragraph (d)(2) of this section or unless the gear is stowed as specified in § 229.2.

(iii) Seasonal area-specific gear or vessel requirements. From September 1 to May 31, no person or vessel may fish with or possess anchored gillnet gear in the Other Northeast Gillnet Waters Area that is south of a straight line from 41°18.2′ N lat., 71 °51.5′ W long. (Watch Hill Point, RI) south to 40°00′ N lat. and then east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal anchored gillnet gear requirements specified in paragraph (d)(1) of this section, and the area-specific requirements listed in paragraph (d)(2) of this section or unless the gear is stowed as specified in § 229.2.

(8) Mid/South Atlantic Gillnet Waters—(i) Area. The Mid/South Atlantic Gillnet Waters consists of all U.S. waters bounded on the north from Long Island, NY, at 72°30′ W long. south to 36°33.03′ N lat. and east to the eastern edge of the EEZ, and bounded on the south by 32°00′ N lat., and east to the eastern edge of the EEZ. When the Mid/South Atlantic Gillnet Waters Area overlaps the Southeast U.S. Restricted Area and its restricted period as specified in paragraphs (f)(1) and (2) of this section, then the closure and exemption for the Southeast U.S. Restricted Area as specified in paragraph (f)(2) of this section applies.

(ii) Area-specific gear or vessel requirements. From September 1 through May 31, no person or vessel may fish with or possess anchored gillnet gear in the Mid/South Atlantic Gillnet Waters unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal anchored gillnet gear requirements specified in paragraph (d)(1) of this section, and the following area specific requirements, or unless the gear is stowed as specified in § 229.2. When the Mid/South Atlantic Gillnet Waters Area overlaps the Southeast U.S. Restricted Area and its restricted period as specified in paragraphs (f)(1) and (2) of this section, then the closure and exemption for the Southeast U.S. Restricted Area as specified in paragraph (f)(2) of this section applies.

(A) Buoy line weak links. All buoys, flotation devices and/or weights (except gillnets, anchors, and leadline woven into the buoy line), such as surface buoys, high flyers, sub-surface buoys, toggles, window weights, etc., must be attached to the buoy line with a weak link placed as close to each individual buoy, flotation device and/or weight as operationally feasible and that meets the following specifications:

(1) The weak link must be chosen from the following list approved by NMFS: Swivels, plastic weak links, rope of appropriate breaking strength, hog rings, rope stapled to a buoy stick, or other materials or devices approved in writing by the Assistant Administrator. A brochure illustrating the techniques for making weak links is available from the Regional Administrator, NMFS, Greater Atlantic Region upon request.

(2) The breaking strength of the weak links must not exceed 1,100 lb (499.0 kg).

(3) Weak links must break cleanly leaving behind the bitter end of the line. The bitter end of the line must be free of any knots when the weak link breaks. Splices are not considered to be knots for the purposes of this paragraph (d)(8)(ii)(A).

(B) Net panel weak links. The weak link requirements apply to all variations in panel size. All net panels must contain weak links that meet the following specifications unless exempted under paragraph (a)(5) of this section:

(1) The breaking strength for each of the weak links must not exceed 1,100 lb (499.0 kg).

(2) The weak link must be chosen from the following list approved by NMFS: Plastic weak links or rope of appropriate breaking strength. If rope of appropriate breaking strength is used throughout the floatline then individual weak links are not required. A brochure illustrating the techniques for making weak links is available from the Regional Administrator, NMFS, Greater Atlantic Region upon request.

(3) Weak links must be placed in the center of the floatline of each gillnet net panel up to and including 50 fathoms (300 ft or 91.4 m) in length, or at least every 25 fathoms (150 ft or 45.7 m) along the floatline for longer panels.

(C) Additional anchoring system and net panel weak link requirements. All gillnets must return to port with the vessel unless the gear meets the following specifications:

(1) Anchoring systems. All anchored gillnets, regardless of the number of net panels, must be secured at each end of the net string with a burying anchor (an anchor that holds to the ocean bottom through the use of a fluke, spade, plow, or pick) having the holding capacity equal to or greater than a 22-lb (10.0-kg) Danforth-style anchor unless exempted under paragraph (a)(5) of this section. Dead weights do not meet this requirement. A brochure illustrating the techniques for rigging anchoring systems is available from the Regional Administrator, NMFS, Greater Atlantic Region upon request.

(2) Net panel weak links. Net panel weak links must meet the specifications in this paragraph. The breaking strength of each weak link must not exceed 1,100 lb (499.0 kg). The weak link requirements apply to all variations in panel size. All net panels in a string must contain weak links that meet one of the following two configurations found in paragraph (d)(2)(ii)(A) or (B) of this section.

(3) Additional provision for North Carolina. All gillnets set 300 yards (274.3 m) or less from the shoreline in North Carolina must meet the anchoring system and net panel weak link requirements in paragraphs (d)(8)(ii)(C)(1) and (2) of this section, or the following:

(i) The entire net string must be less than 300 yards (274.3 m) from shore.

(ii) The breaking strength of each weak link must not exceed 600 lb (272.2 kg).The weak link requirements apply to all variations in panel size.

(iii) All net panels in a string must contain weak links that meet one of the following two configuration specifications found in paragraph (d)(2)(ii)(A) or (B) of this section.

(iv) Regardless of the number of net panels, all anchored gillnets must be secured at the offshore end of the net string with a burying anchor (an anchor that holds to the ocean bottom through the use of a fluke, spade, plow, or pick) having a holding capacity equal to or greater than an 8-lb (3.6-kg) Danforth-style anchor, and at the inshore end of the net string with a dead weight equal to or greater than 31 lb (14.1 kg).

(e) Restrictions applicable to drift gillnet gear—(1) Cape Cod Bay Restricted Area—(i) Area. The Cape Cod Bay Restricted Area is bounded by the following points and on the south and east by the interior shoreline of Cape Cod, Massachusetts.

Table 20 to Paragraph (e)(1)(i)

Point	N lat.	W long.
CCB1	41°46.8′	70°30′
CCB2	42°12′	70°30′
CCB3	42°12′	70°15′
CCB4	42°04.8′	70°10′

(ii) Closure. From January 1 through April 30 of each year, no person or vessel may fish with or possess drift gillnet gear in the Cape Cod Bay Restricted Area unless the Assistant Administrator specifies gear restrictions or alternative fishing practices in accordance with paragraph (e)(1)(i) of this section and the gear or practices comply with those specifications, or unless the gear is stowed as specified in § 229.2. The Assistant Administrator may waive this closure for the remaining portion of the winter restricted period in any year through a notification in the Federal Register if NMFS determines that right whales have left the restricted area and are unlikely to return for the remainder of the season.

(iii) Area-specific gear or vessel requirements. From May 1 through December 31 of each year, no person or vessel may fish with or possess drift gillnet gear in the Cape Cod Bay Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, or unless the gear is stowed as specified in § 229.2. Additionally, no person or vessel may fish with or possess drift gillnet gear at night in the Cape Cod Bay Restricted Area unless that gear is tended, or unless the gear is stowed as specified in § 229.2. During that time, all drift gillnet gear set by that vessel in the Cape Cod Bay Restricted Area must be removed from the water and stowed on board the vessel before a vessel returns to port.

(2) Great South Channel Restricted Gillnet Area—(i) Area. The Great South Channel Restricted Gillnet Area consists of the area bounded by lines connecting the following four points:

Table 21 to Paragraph (e)(2)(i)

Point	N lat.	W long.
GSC1	41°02.2′	69°02′
GSC2	41°43.5′	69°36.3′
GSC3	42°10′	68°31′
GSC4	41°38′	68°13′

(ii) Closure. From April 1 through June 30 of each year, no person or vessel may set, fish with or possess drift gillnet gear in the Great South Channel Restricted Gillnet Area unless the Assistant Administrator specifies gear restrictions or alternative fishing practices in accordance with paragraph (i) of this section and the gear or practices comply with those specifications, or unless the gear is stowed as specified in § 229.2.

(iii) Area-specific gear or vessel requirements. From July 1 through March 31 of each year, no person or vessel may fish with or possess drift gillnet gear in the Great South Channel Restricted Gillnet Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, or unless the gear is stowed as specified in § 229.2. Additionally, no person or vessel may fish with or possess drift gillnet gear at night in the Great South Channel Restricted Gillnet Area unless that gear is tended, or unless the gear is stowed as specified in § 229.2. During that time, all drift gillnet gear set by that vessel in the Great South Channel Restricted Gillnet Area must be removed from the water and stowed on board the vessel before a vessel returns to port.

(3) Great South Channel Sliver Restricted Area—(i) Area. The Great South Channel Sliver Restricted Area consists of the area bounded by lines connecting the following points:

Table 22 to Paragraph (e)(3)(i)

Point	N lat.	W long.
GSCRA1	41°02.2′	69°02′
GSCRA2	41°43.5′	69°36.3′
GSCRA3	41°40′	69°45′
GSCRA4	41°00′	69°05′

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess drift gillnet gear in the Great South Channel Sliver Restricted Gillnet Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, or unless the gear is stowed as specified in § 229.2. Additionally, no person or vessel may fish with or possess drift gillnet gear at night in the Great South Channel Sliver Restricted Area unless that gear is tended, or unless the gear is stowed as specified in § 229.2. During that time, all drift gillnet gear set by that vessel in the Great South Channel Sliver Restricted Area must be removed from the water and stowed on board the vessel before a vessel returns to port.

(4) Stellwagen Bank/Jeffreys Ledge Restricted Area—(i) Area. The Stellwagen Bank/Jeffreys Ledge Restricted Area includes all Federal waters of the Gulf of Maine, except those designated the Cape Cod Bay Restricted Area in paragraph (e)(1) of this section, that lie south of 43°15′ N lat. and west of 70°00′ W long.

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess drift gillnet gear in the Stellwagen Bank/Jeffreys Ledge Restricted Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, or unless the gear is stowed as specified in § 229.2. Additionally, no person or vessel may fish with or possess drift gillnet gear at night in the Stellwagen Bank/Jeffreys Ledge Area unless that gear is tended, or unless the gear is stowed as specified in § 229.2. During that time, all drift gillnet gear set by that vessel in the Stellwagen Bank/Jeffreys Ledge Restricted Area must be removed from the water and stowed on board the vessel before a vessel returns to port.

(5) Other Northeast Gillnet Waters Area—(i) Area. The Other Northeast Gillnet Waters Area consists of all state and Federal U.S. waters from the U.S./Canada border to Long Island, NY, at 72°30′ W long. south to 36°33.03′ N lat. and east to the eastern edge of the EEZ, with the exception of the Cape Cod Bay Restricted Area, Stellwagen Bank/Jeffreys Ledge Restricted Area, Great South Channel Restricted Gillnet Area, Great South Channel Sliver Restricted Area, and exempted waters listed in paragraph (a)(3) of this section.

(ii) Year-round area-specific gear or vessel requirements. No person or vessel may fish with or possess drift gillnet gear in the Other Northeast Gillnet Waters Area unless that gear complies with the gear marking requirements specified in paragraph (b) of this section, or unless the gear is stowed as specified in § 229.2. Additionally, no person or vessel may fish with or possess drift gillnet gear at night in the Other Northeast Gillnet Waters Area unless that gear is tended, or unless the gear is stowed as specified in § 229.2. During that time, all drift gillnet gear set by that vessel in the Other Northeast Gillnet Waters Area must be removed from the water and stowed on board the vessel before a vessel returns to port.

(iii) Seasonal area-specific gear or vessel requirements. From September 1 to May 31, no person or vessel may fish with or possess drift gillnet gear in the Other Northeast Gillnet Waters Area that is south of a straight line from 41°18.2′ N lat., 71°51.5′ W long. (Watch Hill Point, RI) south to 40°00′ N lat. and then east to the eastern edge of the EEZ, unless that gear complies with the gear marking requirements specified inparagraph (b) of this section, or unless the gear is stowed as specified in § 229.2. Additionally, no person or vessel may fish with or possess drift gillnet gear at night in the Other Northeast Gillnet Waters Area unless that gear is tended, or unless the gear is stowed as specified in § 229.2. During that time, all drift gillnet gear set by that vessel in the Other Northeast Gillnet Waters Area must be removed from the water and stowed on board the vessel before a vessel returns to port.

(6) Mid/South Atlantic Gillnet Waters Area—(i) Area. The Mid/South Atlantic Gillnet Waters consists of all U.S. waters bounded on the north from Long Island, NY at 72°30′ W long. south to 36°33.03′ N lat. and east to the eastern edge of the EEZ, and bounded on the south by 32°00′ N lat., and east to the eastern edge of the EEZ. When the Mid/South Atlantic Gillnet Waters Area overlaps the Southeast U.S. Restricted Area and its restricted period as specified in paragraphs (f)(1) and (2) of this section, then the closure and exemption for the Southeast U.S. Restricted Area as specified in paragraph (f)(2) of this section applies.

(ii) Area-specific gear or vessel requirements. From September 1 through May 31, no person or vessel may fish with or possess drift gillnet gear at night in the Mid/South Atlantic Gillnet Waters Area unless:

(A) The gear complies with gear marking requirements specified in paragraph (b) of this section;

(B) The gear is tended; and

(C) All gear is removed from the water and stowed on board the vessel before a vessel returns to port. No person or vessel may possess drift gillnet at night in the Mid/South Atlantic Gillnet Waters unless the gear is stowed as specified in § 229.2. When the Mid/South Atlantic Gillnet Waters Area overlaps the Southeast U.S. Restricted Area and its restricted period as specified in paragraphs (f)(1) and (2) of this section, then the closure and exemption for the Southeast U.S. Restricted Area as specified in paragraph (f)(2) of this section applies.

(f) Restrictions applicable to the Southeast U.S. Restricted Area—(1) Area. The Southeast U.S. Restricted Area consists of the area bounded by straight lines connecting the following points in the order stated from south to north:

Table 23 to Paragraph (f)(1)

Point	N lat.	W long.
SERA1	27°51′	( ¹)
SERA2	27°51′	80°00′
SERA3	32°00′	80°00′
SERA4	32°36′	78°52′
SERA5	32°51′	78°36′
SERA6	33°15′	78°24′
SERA7	33°27′	78°04′
SERA8	( ²)	78°33.9′

¹ Florida shoreline.

² South Carolina shoreline.

(i) Southeast U.S. Restricted Area N. The Southeast U.S. Restricted Area N consists of the Southeast U.S. Restricted Area from 29°00′ N lat. northward.

(ii) Southeast U.S. Restricted Area S. The Southeast U.S. Restricted Area S consists of the Southeast U.S. Restricted Area southward of 29°00′ N lat.

(2) Restricted periods, closure, and exemptions—(i) Restricted periods. The restricted period for the Southeast U.S. Restricted Area N is from November 15 through April 15, and the restricted period for the Southeast U.S. Restricted Area S is from December 1 through March 31.

(ii) Closure for gillnets. (A) Except as provided under paragraph (f)(2)(v) of this section, fishing with or possessing gillnet in the Southeast U.S. Restricted Area N during the restricted period is prohibited.

(B) Except as provided under paragraphs (f)(2)(iii) and (iv) of this section, fishing with gillnet in the Southeast U.S. Restricted Area S during the restricted period is prohibited.

(iii) Exemption for Southeastern U.S. Atlantic shark gillnet fishery. Fishing with gillnet for sharks with webbing of 5 inches (12.7 cm) or greater stretched mesh is exempt from the restrictions under paragraph (f)(2)(ii)(B) of this section if:

(A) The gillnet is deployed so that it encloses an area of water;

(B) A valid commercial directed shark limited access permit has been issued to the vessel in accordance with 50 CFR 635.4(e) and is on board;

(D) The gillnet is removed from the water before night or immediately if visibility decreases below 500 yards (1,500 ft, 460 m);

(E) Each set is made under the observation of a spotter plane;

(F) No gillnet is set within 3 nautical miles (5.6 km) of a right, humpback, or fin whale;

(G) The gillnet is removed immediately from the water if a right, humpback, or fin whale moves within 3 nautical miles (5.6 km) of the set gear;

(H) The gear complies with the gear marking requirements specified in paragraph (b) of this section; and

(I) The operator of the vessel calls the Southeast Fisheries Science Center Panama City Laboratory in Panama City, FL, not less than 48 hours prior to departing on any fishing trip in order to arrange for observer coverage. If the Panama City Laboratory requests that an observer be taken on board a vessel during a fishing trip at any time from December 1 through March 31 south of 29°00′ N lat., no person may fish with such gillnet aboard that vessel in the Southeast U.S. Restricted Area S unless an observer is on board that vessel during the trip.

(iv) Exemption for Spanish Mackerel component of the Southeast Atlantic gillnet fishery. Fishing with gillnet for Spanish mackerel is exempt from the restrictions under paragraph (f)(2)(ii)(B) of this section from December 1 through December 31, and from March 1 through March 31 if:

(A) Gillnet mesh size is between 3.5 inches (8.9 cm) and 4 7/8 inches (12.4 cm) stretched mesh;

(B) A valid commercial vessel permit for Spanish mackerel has been issued to the vessel in accordance with 50 CFR 622.4(a)(2)(iv) and is on board;

(C) No person may fish with, set, place in the water, or have on board a vessel a gillnet with a float line longer than 800 yards (2,400 ft, 732 m);

(D) No person may fish with, set, or place in the water more than one gillnet at any time;

(E) No more than two gillnets, including any net in use, may be possessed at any one time; provided, however, that if two gillnets, including any net in use, are possessed at any one time, they must have stretched mesh sizes (as allowed under the regulations) that differ by at least .25 inch (.64 cm);

(F) No person may soak a gillnet for more than 1 hour. The soak period begins when the first mesh is placed in the water and ends either when the first mesh is retrieved back on board the vessel or the gathering of the gillnet is begun to facilitate retrieval on board the vessel, whichever occurs first; providing that, once the first mesh is retrieved or the gathering is begun, the retrieval is continuous until the gillnet is completely removed from the water;

(G) No net is set at night or when visibility is less than 500 yards (1,500 ft, 460 m);

(H) The gillnet is removed from the water before night or immediately if visibility decreases below 500 yards (1,500 ft, 460 m);

(I) No net is set within 3 nautical miles (5.6 km) of a right, humpback, or fin whale;

(J) The gillnet is removed immediately from the water if a right, humpback, or fin whale moves within 3 nautical miles (5.6 km) of the set gear; and

(K) The gear complies with the gear marking requirements specified in paragraph (b) of this section, the universal anchored gillnet gear requirements specified in paragraph (d)(1) of this section, and the area-specific requirements for anchored gillnets specified in paragraphs (d)(8)(ii)(A) through (D) of this section for the Mid/South Atlantic Gillnet Waters.

(v) Exemption for vessels in transit with gillnet aboard. Possession of gillnet aboard a vessel in transit is exempt from the restrictions under paragraph (f)(2)(ii)(A) of this section if: All nets are covered with canvas or other similar material and lashed or otherwise securely fastened to the deck, rail, or drum; and all buoys, high flyers, and anchors are disconnected from all gillnets. No fish may be possessed aboard such a vessel in transit.

(vi) Restrictions for trap/pot gear. Fishing with trap/pot gear in the Southeast U.S. Restricted Area N during the restricted period is allowed if:

(A) Trap/pot gear is not fished in a trap/pot trawl;

(B) All buoys or flotation devices are attached to the buoy line with a weak link that meets the requirements of paragraph (c)(2)(ii) of this section. The weak link has a maximum breaking strength of 600 lbs (272 kg) except in Florida State waters where the maximum breaking strength is 200 lbs (91kg);

(C) The buoy line has a maximum breaking strength of 2,200 lbs (998 kg) except in Florida State waters where the maximum breaking strength is 1,500 lbs (630 kg);

(D) The entire buoy line must be free of objects (e.g., weights, floats, etc.) except where it attaches to the buoy and trap/pot;

(E) The buoy line is made of sinking line;

(F) The gear complies with gear marking requirements as specified in paragraph (b) of this section; and

(G) Trap/pot gear that is deployed in the EEZ (as defined in § 600.10 of this title) is brought back to port at the conclusion of each fishing trip.

(g) Restrictions applicable to the Other Southeast Gillnet Waters—(1) Area. The Other Southeast Gillnet Waters Area includes all waters bounded by 32°00′ N lat. on the north (near Savannah, GA), 26°46.50′ N lat. on the south (near West Palm Beach, FL), 80°00′ W long. on the west, and the EEZ boundary on the east.

(2) Closure for gillnets. Fishing with or possessing gillnet gear in the Other Southeast Gillnet Waters Area north of 29°00′ N lat. from November 15 through April 15 or south of 29°00′ N lat. from December 1 through March 31 is allowed if one of the following exemptions applies:

(i) Exemption for Southeastern U.S. Atlantic shark gillnet fishery. Fishing with or possessing gillnet gear with webbing of 5 inches (12.7 cm) or greater stretched mesh is allowed if:

(A) The gear is marked as required in paragraph (b) of this section;

(B) No net is set within 3 nautical miles (5.6 km) of a right, humpback, or fin whale; and

(C) The gear is removed immediately from the water if a right, humpback, or fin whale moves within 3 nautical miles (5.6 km) of the set gear.

(ii) Exemption for Southeast Atlantic gillnet fishery. Fishing with or possessing gillnet gear is allowed if:

(A) The gear is marked as required in paragraph (b) of this section; or

(B) The gear is fished south of 27°51′ N.

(iii) Exemption for vessels in transit with gillnet aboard. Possession of gillnet gear aboard a vessel in transit is allowed if:

(A) All nets are covered with canvas other similar material and securely fastened to the deck, rail, or drum; and

(B) All buoys, high flyers, and anchors are disconnected from all gillnets.

(h) Restrictions applicable to the Southeast U.S. Monitoring Area—(1) Area. The Southeast U.S. Monitoring Area consists of the area from 27°51′ N lat. (near Sebastian Inlet, FL) south to 26°46.50′ N lat. (near West Palm Beach, FL), extending from the shoreline or exemption line out to 80°00′ W long.

(2) Restrictions for Southeastern U.S. Atlantic shark gillnet fishery. Fishing with or possessing gillnet gear with webbing of 5 inches (12.7 cm) or greater stretched mesh from December 1 through March 31 is allowed if:

(i) The gear complies with the gear marking requirements specified in paragraph (b) of this section;

(ii) The vessel owner/operator is in compliance with the vessel monitoring system (VMS) requirements found in 50 CFR 635.69; and

(iii) The vessel owner/operator and crew are in compliance with observer requirements found in § 229.7.

(3) Restrictions for Southeastern U.S. Atlantic shark gillnet fishery vessels in transit. Possession of gillnet gear with webbing of 5 inches (12.7 cm) or greater stretched mesh aboard a vessel in transit from December 1 through March 31 is allowed if:

(i) All gear is stowed as specified in § 229.2; and

(ii) The vessel owner/operator is in compliance with the vessel monitoring system (VMS) requirements found in 50 CFR 635.69.

(i) Other provisions. In addition to any other emergency authority under the Marine Mammal Protection Act, the Endangered Species Act, the Magnuson-Stevens Fishery Conservation and Management Act, or other appropriate authority, the Assistant Administrator may take action under this section in the following situations:

(1) Entanglements in critical habitat or restricted areas. If a serious injury or mortality of a right whale occurs in the Cape Cod Bay Restricted Area from January 1 through May 15, in the Great South Channel Restricted Area from April 1 through June 30, the Southeast U.S. Restricted Area N from November 15 to April 15, or the Southeast U.S. Restricted Area S from December 1 through March 31 as the result of an entanglement by trap/pot or gillnet gear allowed to be used in those areas and times, the Assistant Administrator shall close that area to that gear type (i.e., trap/pot or gillnet) for the rest of that time period and for that same time period in each subsequent year, unless the Assistant Administrator revises the restricted period in accordance with paragraph (i)(2) of this section or unless other measures are implemented under paragraph (i)(2) of this section.

(2) Other special measures. The Assistant Administrator may, in consultation with the Take Reduction Team, revise the requirements of this section through a publication in the Federal Register if:

(i) NMFS verifies that certain gear characteristics are both operationally effective and reduce serious injuries and mortalities of endangered whales;

(ii) New gear technology is developed and determined to be appropriate;

(iii) Revised breaking strengths are determined to be appropriate;

(iv) New marking systems are developed and determined to be appropriate;

(v) NMFS determines that right whales are remaining longer than expected in a closed area or have left earlier than expected;

(vi) NMFS determines that the boundaries of a closed area are not appropriate;

(vii) Gear testing operations are considered appropriate; or

(viii) Similar situations occur.

[86 FR 52011, Sept. 17, 2021, as amended at 87 FR 11979, Mar. 3, 2022; 89 FR 8349, Feb. 7, 2024]

§ 229.33 - Harbor Porpoise Take Reduction Plan Regulations—New England.

(a) Restrictions—(1) Northeast Closure Area—(i) Area restrictions. From August 15 through September 13, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies from the Northeast Closure Area. This restriction does not apply to vessels fishing with a single pelagic gillnet (as described and used as set forth in § 648.81(f)(2)(ii) of this title).

(ii) Area boundaries. The Northeast Closure Area is bounded by straight lines connecting the following points in the order stated:

Northeast Closure Area

Point	N. Lat.	W. Long.
NE1	44°27.3′	68°55.0′ (ME shoreline)
NE2	43°29.6′	68°55.0′
NE3	44°04.4′	67°48.7′
NE4	44°06.9′	67°52.8′
NE5	44°31.2′	67°02.7′
NE6	44°45.8′	67°02.7′ (ME shoreline)

(2) Mid-Coast Management Area—(i) Area restrictions. From September 15 through May 31, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies from the Mid-Coast Management Area, unless the gillnet gear is equipped with pingers in accordance with paragraphs (b) and (c) of this section. This prohibition does not apply to vessels fishing with a single pelagic gillnet (as described and used as set forth in § 648.81(f)(2)(ii) of this title).

(ii) Area boundaries. The Mid-Coast Management Area is the area bounded by straight lines connecting the following points in the order stated:

Mid-Coast Management Area

Point	N. Lat.	W. Long.
MC1	42°30.0′	70°50.1′ (MA shoreline)
MC2	42°30.0′	70°15.0′
MC3	42°40.0′	70°15.0′
MC4	42°40.0′	70°00.0′
MC5	43°00.0′	70°00.0′
MC6	43°00.0′	69°30.0′
MC7	43°30.0′	69°30.0′
MC8	43°30.0′	69°00.0′
MC9	44°17.8′	69°00.0′ (ME shoreline)

(3) Massachusetts Bay Management Area—(i) Area restrictions. From November 1 through February 28/29 and from April 1 through May 31, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies from the Massachusetts Bay Management Area, unless the gillnet gear is equipped with pingers in accordance with paragraphs (b) and (c) of this section. From March 1 through March 31, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies from the Massachusetts Bay Management Area. These restrictions do not apply to vessels fishing with a single pelagic gillnet (as described in § 648.81(f)(2)(ii) of this title).

(ii) Area boundaries. The Massachusetts Bay Management Area is bounded by straight lines connecting the following points in the order stated:

Massachusetts Bay Management Area

Point	N. Lat.	W. Long.
MB1	42°30.0′	70°50.1′ (MA shoreline)
MB2	42°30.0′	70°30.0′
MB3	42°15.0′	70°30.0′
MB4	42°15.0′	70°00.0′
MB5	42°00.0′	70°00.0′
MB6	42°00.0′	70°01.2′ (MA shoreline)
MB7	42°00.0′	70°04.8′ (MA shoreline)
MB8	42°00.0′	70°42.2′ (MA shoreline)

(4) Stellwagen Bank Management Area—(i) Area restrictions. From November 1 through May 31, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies from the Stellwagen Bank Management Area, unless the gillnet gear is equipped with pingers in accordance with paragraphs (b) and (c) of this section. This restriction does not apply to vessels fishing with a single pelagic gillnet (as described in § 648.81(f)(2)(ii) of this title).

(ii) Area boundaries. The Stellwagen Bank Management Area is bounded by straight lines connecting the following points in the order stated:

Stellwagen Bank Management Area

Point	N. Lat.	W. Long.
SB1	42°30.0′	70°30.0′
SB2	42°30.0′	70°15.0′
SB3	42°15.0′	70°15.0′
SB4	42°15.0′	70°30.0′
SB1	42°30.0′	70°30.0′

(5) Southern New England Management Area—(i) Area restrictions. From December 1 through May 31, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies from the Southern New England Management Area, unless the gillnet gear is equipped with pingers in accordance with paragraphs (b) and (c) of this section. This prohibition does not apply to vessels fishing with a single pelagic gillnet (as described in § 648.81(f)(2)(ii) of this title).

(ii) Area boundaries. The Southern New England Management Area is bounded by straight lines connecting the following points in the order stated:

Southern New England Management Area

Point	N. Lat.	W. Long.
SNE1	Western boundary as specified ¹.
SNE2	40°00.0′	72°30.0′
SNE3	40°00.0′	69°30.0′
SNE4	42°15.0′	69°30.0′
SNE5	42°15.0′	70°00.0′
SNE6	41°58.3′	70°00.0′ (MA shoreline)

¹ Bounded on the west by a line running from the Rhode Island shoreline at 41°18.2′ N. lat. and 71°51.5′ W. long. (Watch Hill, RI), southwesterly through Fishers Island, NY, to Race Point, Fishers Island, NY; and from Race Point, Fishers Island, NY; southeasterly to the intersection of the 3-nautical mile line east of Montauk Point; southwesterly along the 3-nautical mile line to the intersection of 72°30.0′ W. long.

(6) Cape Cod South Closure Area—(i) Area restrictions. From March 1 through March 31, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies from the Cape Cod South Closure Area. This prohibition does not apply to vessels fishing with a single pelagic gillnet (as described in § 648.81(f)(2)(ii) of this title).

(ii) Area boundaries. The Cape Cod South Closure Area is bounded by straight lines connecting the following points in the order stated:

Cape Cod South Closure Area

Point	N. Lat.	W. Long.
CCS1	41°19.6′	71°45.0′ (RI shoreline)
CCS2	40°40.0′	71°45.0′
CCS3	40°40.0′	70°30.0′
CCS4	41°20.9′	70°30.0′
CCS5	41°23.1′	70°30.0′
CCS6	41°33.1′	70°30.0′ (MA shoreline)

(7) Offshore Management Area—(i) Area restrictions. From November 1 through May 31, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies from the Offshore Management Area, unless the gillnet gear is equipped with pingers in accordance with paragraphs (b) and (c) of this section. This restriction does not apply to vessels fishing with a single pelagic gillnet (as described in § 648.81(f)(2)(ii) of this title).

(ii) Area boundaries. The Offshore Management Area is bounded by straight lines connecting the following points in the order stated:

Offshore Management Area

Point	N. Lat.	W. Long.
OFS1	42°50.0′	69°30.0′
OFS2	43°10.0′	69°10.0′
OFS3	43°10.0′	67°40.0′
OFS4	43°05.8′	67°40.0′ (EEZ boundary)
OFS5	42°53.1′	67°44.5′ (EEZ boundary)
OFS6	42°47.3′	67°40.0′ (EEZ boundary)
OFS7	42°10.0′	67°40.0′
OFS8	42°10.0′	69°30.0′
OFS1	42°50.0′	69°30.0′

(8) Cashes Ledge Closure Area—(i) Area restrictions. During the month of February, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies from the Cashes Ledge Closure Area. This restriction does not apply to vessels fishing with a single pelagic gillnet (as described in § 648.81(f)(2)(ii) of this title).

(ii) Area boundaries. The Cashes Ledge Closure Area is bounded by straight lines connecting the following points in the order stated:

Cashes Ledge Closure Area

Point	N. Lat.	W. Long.
CL1	42°30.0′	69°00.0′
CL2	42°30.0′	68°30.0′
CL3	43°00.0′	68°30.0′
CL4	43°00.0′	69°00.0′
CL1	42°30.0′	69°00.0′

(b) Pingers—(1) Pinger specifications. For the purposes of this subpart, a pinger is an acoustic deterrent device which, when immersed in water, broadcasts a 10 kHz (plus or minus 2 kHz) sound at 132 dB (plus or minus 4 dB) re 1 micropascal at 1 m, lasting 300 milliseconds (plus or minus 15 milliseconds), and repeating every 4 seconds (plus or minus 0.2 seconds).

(2) Pinger attachment. An operating and functional pinger must be attached at each end of a string of gillnets and at the bridle of every net, or every 300 feet (91.4 m or 50 fathoms), whichever is closer.

(c) Pinger training and authorization. The operator of a vessel may not fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove sink gillnet gear or gillnet gear capable of catching multispecies in closed areas where pingers are required as specified under paragraph (b) of this section, unless the operator has satisfactorily received pinger training and possesses and retains on board the vessel a valid pinger training authorization issued by NMFS.

(d) [Reserved]

(e) Research permits. An exemption to the requirements set forth in this section may be acquired for the purposes of conducting scientific or gear research within the restricted areas described in this section. A scientific research permit must be acquired through NMFS's existing permit application process, administered by NMFS.

(f) Other special measures. The Assistant Administrator may, after consultation with the Take Reduction Team, revise the requirements of this section through notification published in the Federal Register if:

(1) NMFS determines that pinger operating effectiveness in the commercial fishery is inadequate to reduce bycatch below the stock's PBR level.

(2) NMFS determines that the boundary or timing of a closed area is inappropriate, or that gear modifications (including pingers) are not reducing bycatch to below the PBR level.

[75 FR 7396, Feb. 19, 2010, as amended at 78 FR 61826, Oct. 4, 2013]

§ 229.34 - Harbor Porpoise Take Reduction Plan Regulations—Mid-Atlantic.

(a)(1) Regulated waters. The regulations in this section apply to all waters in the Mid-Atlantic bounded on the east by 72°30′ W. long. at the southern coast of Long Island, NY at 40°50.1′ N. lat. and on the south by the NC/SC border (33°51.1′ N. lat.), except for the areas exempted in paragraph (a)(2) of this section.

(2) Exempted waters. The regulations within this section are not applicable to waters landward of the first bridge over any embayment, harbor, or inlet, or to waters landward of the following lines:

New York

40°45.70′ N., 72°45.15′ W. to 40°45.72′ N., 72°45.30′ W. (Moriches Bay Inlet)

40°37.32′ N., 73°18.40′ W. to 40°38.00′ N., 73°18.56′ W. (Fire Island Inlet)

40°34.40′ N., 73°34.55′ W. to 40°35.08′ N., 73°35.22′ W. (Jones Inlet)

New Jersey/Delaware

39°45.90′ N., 74°05.90′ W. to 39°45.15′ N., 74°06.20′ W. (Barnegat Inlet)

39°30.70′ N., 74°16.70′ W. to 39°26.30′ N., 74°19.75′ W. (Beach Haven to Brigantine Inlet)

38°56.20′ N., 74°51.70′ W. to 38°56.20′ N., 74°51.90′ W. (Cape May Inlet)

All marine and tidal waters landward of the 72 COLREGS demarcation line (International Regulations for Preventing Collisions at Sea, 1972), as depicted or noted on nautical charts published by NOAA (Coast Charts 1:80,000 scale), and as described in 33 CFR part 80. (Delaware Bay)

Maryland/Virginia

38°19.48′ N., 75°05.10′ W. to 38°19.35′ N., 75°05.25′ W. (Ocean City Inlet)

37°11.10′ N., 75°49.30′ W. to 37°10.65′ N., 75°49.60′ W. (Little Inlet)

37°07.00′ N., 75°53.75′ W. to 37°05.30′ N., 75°56.′ W. (Smith Island Inlet)

North Carolina

(b) Restrictions—(1) Waters off New Jersey Management Area. The Waters off New Jersey Management Area is bounded by straight lines connecting the following points in the order stated:

Waters Off New Jersey Management Area

Point	N. Lat.	W. Long.
WNJ1	40°50.1′	72°30.0′ (NY shoreline)
WNJ2	38°47.0′	72°30.0′
WNJ3	38°47.0′	75°05.0′ (DE shoreline)

(i) Closure. From April 1 through April 20, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear from the Waters off New Jersey Management Area.

(ii) Gear limitations and requirements—large mesh gillnet gear. From January 1 through April 30, except during April 1 through April 20, as described in paragraph (b)(1)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear in the Waters off New Jersey Management Area, unless the gear complies with the specified gear characteristics described in paragraphs (b)(1)(ii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Waters off New Jersey Management Area with large mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(1)(ii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 4,800 ft (1,463.0 m).

(B) Twine size. The twine is at least 0.035 inches (0.90 mm) in diameter.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel, or deployed by the vessel, does not exceed 80.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 16.

(F) Tie-down system. The gillnet gear is equipped with tie-downs spaced not more than 24 ft (7.3 m) apart along the floatline, and each tie-down is not more than 48 inches (18.90 cm) in length from the point where it connects to the floatline to the point where it connects to the lead line.

(iii) Gear limitations and requirements—small mesh gillnet gear. From January 1 through April 30, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any small mesh gillnet gear in the Waters off New Jersey Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(1)(iii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Waters off New Jersey Management Area with small mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(1)(iii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,000 ft (914.4 m) in length.

(B) Twine size. The twine is at least 0.031 inches (0.81 mm) in diameter.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 45.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 10.

(F) Tie-down system. Tie-downs are prohibited.

(2) Mudhole North Management Area. The Mudhole North Management Area is bounded by straight lines connecting the following points in the order stated:

Mudhole North Management Area

Point	N. Lat.	W. Long.
MN1	40°28.1′	74°00.0′ (NJ shoreline)
MN2	40°30.0′	74°00.0′
MN3	40°30.0′	73°20.0′
MN4	40°05.0′	73°20.0′
MN5	40°05.0′	74°02.0′ (NJ shoreline)

(i) Closures. From February 15 through March 15, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large or small mesh gillnet gear from the Mudhole North Management Area. In addition, from April 1 through April 20, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear from the Mudhole North Management Area.

(ii) Gear limitations and requirements—large mesh gillnet gear. From January 1 through April 30, except during February 15 through March 15 and April 1 through April 20 as described in paragraph (b)(2)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear in the Mudhole North Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(2)(ii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Mudhole North Management Area with large mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(2)(ii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,900 ft (1,188.7 m).

(B) Twine size. The twine is at least 0.035 inches (0.90 mm) in diameter.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 80.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 13.

(iii) Gear limitations and requirements—small mesh gillnet gear. From January 1 through April 30, except during February 15 through March 15 as described in paragraph (b)(2)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any small mesh gillnet gear in the Mudhole North Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(2)(iii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Mudhole North Management Area with small mesh gillnet gear on board unless the gear complies with the specified gear characteristics described in paragraphs (b)(2)(iii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,000 ft (914.4 m) in length.

(B) Twine size. The twine is at least 0.031 inches (0.81 mm) in diameter.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 45.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 10.

(F) Tie-down system. Tie-downs are prohibited.

(3) Mudhole South Management Area. The Mudhole South Management Area is bounded by straight lines connecting the following points in the order stated:

Mudhole South Management Area

Point	N. Lat.	W. Long.
MS1	40°05.0′	73°31.0′
MS2	40°05.0′	73°00.0′
MS3	39°51.0′	73°00.0′
MS4	39°51.0′	73°31.0′
MS1	40°05.0′	73°31.0′

(i) Closures. From February 1 through March 15, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large or small mesh gillnet gear in the Mudhole South Management Area. In addition, from April 1 through April 20, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear from the Mudhole South Management Area.

(ii) Gear limitations and requirements—large mesh gillnet gear. From January 1 through April 30, except during February 1 through March 15 and April 1 through April 20 as described in paragraph (b)(3)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear in the Mudhole South Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(3)(ii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Mudhole South Management Area with large mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(3)(ii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,900 ft (1,188.7 m).

(B) Twine size. The twine is at least 0.035 inches (0.90 mm) in diameter.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 80.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 13.

(iii) Gear limitations and requirements—small mesh gillnet gear. From January 1 through April 30 of each year, except during February 1 through March 15 as described in paragraph (b)(3)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any small mesh gillnet gear in the Mudhole South Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(3)(iii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Mudhole South Management Area with small mesh gillnet gear on board unless the gear complies with the specified gear characteristics described in paragraphs (b)(3)(iii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,000 ft (914.4 m) in length.

(B) Twine size. The twine is at least 0.031 inches (0.81 mm) in diameter.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 45.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 10.

(F) Tie-down system. Tie-downs are prohibited.

(4) Southern Mid-Atlantic Management Area. The Southern Mid-Atlantic Management Area is bounded by straight lines connecting the following points in the order stated:

Southern Mid-Atlantic Management Area

Point	N. Lat.	W. Long.
SMA1	38°47.0′	75°05.0′ (DE shoreline)
SMA2	38°47.0′	72°30.0′
SMA3	33°51.1′	72°30.0′
SMA4	33°51.1′	78°32.5′ (NC/SC border)

(ii) Gear limitations and requirements—large mesh gillnet gear. From February 1 through April 30, except during February 15 through March 15 as described in paragraph (b)(4)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear in the Southern Mid-Atlantic Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(4)(ii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Southern Mid-Atlantic Management Area with large mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(4)(ii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,900 ft (1,188.7 m) in length.

(B) Twine size. The twine is at least 0.035 inches (0.90 mm) in diameter.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 80.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 13.

(iii) Gear limitations and requirements—small mesh gillnet gear. From February 1 through April 30, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any small mesh gillnet gear in the Southern Mid-Atlantic Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(4)(iii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Southern Mid-Atlantic Management Area with small mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(4)(iii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is no longer than 2,118 ft (645.6 m).

(B) Twine size. The twine is at least 0.031 inches (0.81 mm) in diameter.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 45.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 7.

(F) Tie-down system. Tie-downs are prohibited.

(c) Research permits. An exemption to the requirements set forth in this section may be acquired for the purposes of conducting scientific or gear research within the restricted areas described in this section. A scientific research permit must be acquired through NMFS' existing permit application process, administered by NMFS.

(d) Other special measures. The Assistant Administrator may revise the requirements of this section through notification published in the Federal Register if NMFS determines that the boundary or timing of a closed area is inappropriate, or that gear modifications are not reducing bycatch to below the stock's PBR level.

[75 FR 7399, Feb. 19, 2010]

§ 229.35 - Bottlenose Dolphin Take Reduction Plan.

(a) Purpose and scope. The purpose of this section is to implement the Bottlenose Dolphin Take Reduction Plan (BDTRP) to reduce incidental mortality and serious injury of strategic stocks of bottlenose dolphins within the Western North Atlantic coastal morphotype in specific Category I and II commercial fisheries from New Jersey through Florida. Specific Category I and II commercial fisheries within the scope of the BDTRP are indentified and updated in the annual List of Fisheries. Gear restricted by this section includes small, medium, and large mesh gillnets and pound nets. The geographic scope of the BDTRP is all tidal and marine waters within 6.5 nautical miles (12 km) of shore from the New York-New Jersey border southward to Cape Hatteras, North Carolina, and within 14.6 nautical miles (27 km) of shore from Cape Hatteras, southward to, and including the east coast of Florida down to the fishery management council demarcation line between the Atlantic Ocean and the Gulf of Mexico (as described in § 600.105 of this title).

(b) Definitions. In addition to the definitions contained in the Act, §§ 216.3 and 229.2 of this chapter, the terms defined in this section shall have the following definitions, even if a contrary definition exists in the Act, § 216.3, or § 229.2:

Beach means landward of and including the mean low water line.

Beach/water interface means the mean low water line.

Bottlenose Dolphin Pound Net Regulated Area means all Virginia marine waters of the Atlantic Ocean within 3 nautical miles (5.56 km) of shoreline and all adjacent tidal waters, bounded on the north by 38°01.6′ N. (Maryland/Virginia border) and on the south by 36°33′ N (Virginia/North Carolina border); and all southern Virginia waters of the mainstem Chesapeake Bay bounded on the south and west by the Hampton Roads Bridge Tunnel across the James River and the Coleman Memorial Bridge across the York River; and north and east by the following points connected by straight lines in the order listed:

Point	Area description
1	Where 37°19.0′ N. lat. meets the shoreline of the Severn River fork, near Stump Point, Virginia (western portion of Mobjack Bay), which is approximately 76°26.75′ W. long.
2	37°19.0′ N. lat., 76°13.0′ W. long.
3	37°13.0′ N. lat., 76°13.0′ W. long.
4	Where 37°13.0′ N. lat. meets the eastern shoreline of Chesapeake Bay, Virginia, near Elliotts Creek, which is approximately 76°00.75′ W. long.

Large mesh gillnet means a gillnet constructed with a mesh size greater than or equal to 7-inches (17.8 cm) stretched mesh.

Medium mesh gillnet means a gillnet constructed with a mesh size of greater than 5-inches (12.7 cm) to less than 7-inches (17.8 cm) stretched mesh.

New Jersey, Delaware, and Maryland State waters means the area consisting of all marine and tidal waters, within 3 nautical miles (5.56 km) of shore, bounded on the north by 40o 30′ N. (New York/New Jersey border at the coast) and on the south by 38o 01.6′ N. (Maryland/Virginia border at the coast).

Night means any time between one hour after sunset and one hour prior to sunrise.

Northern North Carolina State waters means the area consisting of all marine and tidal waters, within 3 nautical miles (5.56 km) of shore, bounded on the north by 36° 33′ N. (Virginia/North Carolina border at the coast) and on the south by 34° 35.4′ N. (Cape Lookout, North Carolina).

Northern Virginia State waters means the area consisting of all marine and tidal waters, within 3 nautical miles (5.56 km) of shore, bounded on the north by 38° 01.6′ N. (Virginia/Maryland border at the coast) and on the south by 37° 07.23′ N. (Cape Charles Light on Smith Island in the Chesapeake Bay mouth).

Small mesh gillnet means a gillnet constructed with a mesh size of less than or equal to 5-inches (12.7 cm) stretched mesh.

South Carolina, Georgia, and Florida waters means the area consisting of all marine and tidal waters, within 14.6 nautical miles (27 km) of shore, bounded on the north by a line extending in a direction of 135°34′55″ from true north from the North Carolina/South Carolina border at 33°51′07.9″ N. and 78°32′32.6″ W., and on the south by the fishery management council demarcation line between the Atlantic Ocean and the Gulf of Mexico (as described in § 600.105 of this title).

Southern North Carolina State waters means the area consisting of all marine and tidal waters, within 3 nautical miles (5.56 km) of shore, bounded on the north by 34°35.4′ N. (Cape Lookout, North Carolina), and on the south by a line extending in a direction of 135°34′55″ from true north from the North Carolina/South Carolina border at 33°51′07.9″ N. and 78°32′32.6″ W.

Southern Virginia State waters means the area consisting of all marine and tidal waters, within 3 nautical miles (5.56 km) of shore, bounded on the north by 37° 07.23′ N. (Cape Charles Light on Smith Island in the Chesapeake Bay mouth) and on the south by 36° 33′ N. (Virginia/North Carolina border at the coast).

(c) BDTRP regulated waters—(1) Gillnets. The regulations pertaining to gillnets in this section apply to New Jersey, Delaware, and Maryland State waters; Northern North Carolina State waters; Northern Virginia State waters; South Carolina, Georgia, and Florida waters; Southern North Carolina State waters; and Southern Virginia State waters as defined in § 229.35(b), except for the waters identified in § 229.34(a)(2), with the following modification and addition. From Chincoteague to Ship Shoal Inlet in Virginia (37° 52′ N. 75° 24.30′ W. to 37° 11.90′ N. 75° 48.30′ W) and South Carolina, Georgia, and Florida waters, those waters landward of the 72 COLREGS demarcation line (International Regulations for Preventing Collisions at Sea, 1972), as depicted or noted on nautical charts published by the National Oceanic and Atmospheric Administration (Coast Charts 1:80,000 scale), and as described in 33 CFR part 80 are excluded from the regulations.

(2) Pound nets. The regulations pertaining to pound nets in this section apply to the Bottlenose Dolphin Pound Net Regulated Area.

(d) Regional management measures—(1) New Jersey, Delaware, and Maryland State waters—(i) Medium and large mesh gillnets. From June 1 through October 31, in New Jersey, Delaware, and Maryland state waters, no person may fish with any medium or large mesh anchored gillnet gear at night unless such person remains within 0.5 nautical mile (0.93 km) of the closest portion of each gillnet and removes all such gear from the water and stows it on board the vessel before the vessel returns to port.

(ii) [Reserved]

(2) Virginia state waters—(i) Medium and large mesh gillnets. From June 1 through October 31, in Southern Virginia State waters and Northern Virginia State waters, no person may fish with any medium or large mesh anchored gillnet gear at night unless such person remains within 0.5 nautical mile (0.93 km) of the closest portion of each gillnet and removes all such gear from the water and stows it on board the vessel before the vessel returns to port.

(ii) Pound nets. (A) Year-round, any offshore pound net in the Bottlenose Dolphin Pound Net Regulated Area must use a modified pound net leader.

(B) Year-round, any nearshore and offshore pound nets set in the Bottlenose Dolphin Pound Net Regulated Area must have all three continuous sections as defined in 50 CFR 229.2, except that one or more sections may be missing for a maximum period of 10 days for purposes of setting, removing, and/or repairing pound nets.

(C) The pound net licensee and the vessel operator of any offshore pound net set in the Bottlenose Dolphin Pound Net Regulated Area must have completed modified pound net leader compliance training and possess on board the vessel a valid modified pound net leader compliance training certificate issued by NMFS. NMFS retains discretion to provide exemptions in limited circumstances where appropriate. Notice will be given by NMFS announcing the times and locations of modified pound net leader compliance training.

(3) Southern Virginia State waters—(i) Large mesh gillnets. From November 1 through December 31, in Southern Virginia State waters, no person may fish with, possess on board a vessel unless stowed, or fail to remove from the water, any large mesh gillnet gear at night.

(ii) [Reserved]

(4) Northern North Carolina State waters—(i) Small mesh gillnets. From May 1 through October 31, in Northern North Carolina State waters, no person may fish with any small mesh gillnet gear longer than 1,000 feet (304.8 m).

(ii) Medium mesh gillnets. From November 1 through April 30 of the following year, in Northern North Carolina State waters, no person may fish with any medium mesh gillnet at night.

(iii) Large mesh gillnets. (A) From April 15 through December 15, in Northern North Carolina State waters, no person may fish with any large mesh gillnet.

(B) From December 16 through April 14 of the following year, in Northern North Carolina State waters, no person may fish with any large mesh gillnet without tie-downs at night.

(5) Southern North Carolina State waters—(i) Medium mesh gillnets. From November 1 through April 30 of the following year, in Southern North Carolina State waters, no person may fish with any medium mesh gillnet at night.

(ii) Large mesh gillnets. (A) From April 15 through December 15, in Southern North Carolina State waters, no person may fish with any large mesh gillnet.

(B) From December 16 through April 14 of the following year, in Southern North Carolina State waters, no person may fish, possess on board unless stowed, or fail to remove from the water, any large mesh gillnet at night.

(6) South Carolina, Georgia, and Florida waters—(i) Gillnets. Year-round, in South Carolina, Georgia, and Florida waters, no person may fish with any gillnet gear unless such person remains within 0.25 nautical miles (0.46 km) of the closest portion of the gillnet. Gear shall be removed from the water and stowed on board the vessel before the vessel returns to port.

(ii) [Reserved]

[71 FR 24796, Apr. 26, 2006, as amended at 73 FR 77533, Dec. 19, 2008; 77 FR 45270, July 31, 2012; 80 FR 6929, Feb. 9, 2015]

§ 229.36 - Atlantic Pelagic Longline Take Reduction Plan (PLTRP).

Link to an amendment published at 88 FR 36972, June 6, 2023. Link to a delay of the above amendment published at 89 FR 55523, July 5, 2024.

(a) Purpose and scope. The purpose of this section is to implement the PLTRP to reduce incidental mortality and serious injury of short-finned pilot whales in the Atlantic pelagic longline fishery off the U.S. East Coast, a component of the Atlantic Ocean, Caribbean, Gulf of Mexico large pelagics longline fishery. The requirements in this section apply to the owner or operator of any vessel that has been issued or is required to be issued an Atlantic HMS tunas, swordfish, or shark permit (under 50 CFR 635.4) and that has onboard pelagic longline gear (as defined at 50 CFR 635.2) in the EEZ (as defined in 50 CFR 600.10) of the Atlantic Ocean east of the line of demarcation between the Atlantic Ocean and the Gulf of Mexico (as defined in 50 CFR 600.105(c)).

(b) Definitions. In addition to the definitions contained in the MMPA and §§ 216.3 and 229.2 of this chapter, the following definitions apply.

(1) Active gear means mainline in the water with gangions (as defined in 50 CFR 635.2) or hooks attached.

(2) Mid-Atlantic Bight means the area bounded by rhumb lines connecting the following points: 43° N 77° W; 43° N 71° W; 35° N 71° W; 35° N 77° W; and 43° N 77° W.

(c) Marine Mammal Handling and Release Placard. The placard, “Marine Mammal Handling/Release Guidelines: A Quick Reference for Atlantic Pelagic Longline Gear,” must be kept posted inside the wheelhouse and on the working deck. You may contact the NMFS Southeast Regional Office at (727) 824-5312 to request additional copies of the placard.

(d) [Reserved]

(e) Mainline gear restrictions. Vessels operating in the portion of the Mid-Atlantic Bight in the EEZ (as defined in 50 CFR 600.10) may not deploy pelagic longline gear unless the gear meets the following mainline specifications:

(1) Mainline setting. There can only be one piece of mainline in the water at any time. If the gear breaks or parts after setting, the vessel owner or operator must make every effort to remove the additional portions of the gear as soon as possible.

(2) Mainline length. Mainline length cannot exceed 32 nmi.

(3) Active gear. There can be no more than 30 nmi of active gear.

(4) Maximum active gear length. A section of active gear cannot exceed 20 nmi.

(5) Gaps. Between any two parts of active gear, there must be a gap of at least 1 nmi.

[74 FR 23358, May 19, 2009, as amended at 88 FR 36972, June 6, 2023]

§ 229.37 - False Killer Whale Take Reduction Plan.

(a) Purpose and scope. The purpose of this section is to implement the False Killer Whale Take Reduction Plan to reduce mortality and serious injury of the Hawaii Pelagic and Hawaii Insular stocks of false killer whales in the Hawaii-based deep-set and shallow-set pelagic longline fisheries. The requirements in this section apply to vessel owners and operators, and vessels registered for use with Hawaii longline limited access permits issued under § 665.801(b) of this title.

(b) Definitions. In addition to the definitions contained in § 229.2, terms in this section have the following meanings:

(1) Deep-set or Deep-setting has the same meaning as the definition at § 665.800 of this title.

(2) Longline gear has the same meaning as the definition at § 665.800 of this title.

(c) Gear requirements. (1) While deep-setting, the owner and operator of a vessel registered for use under a Hawaii longline limited access permit must use only hooks meeting the following specifications:

(i) Circle hook with hook shank containing round wire that can be measured with a caliper or other appropriate gauge, with a wire diameter not to exceed 4.5 mm (0.177 in); and

(ii) Offset not to exceed 10 degrees.

(2) While deep-setting, owners and operators of vessels registered for use under a valid Hawaii longline limited access permit must use leaders and branch lines that all have a diameter of 2.0 mm or larger if the leaders and branch lines are made of monofilament nylon. If any other material is used for a leader or branch line, that material must have a breaking strength of at least 400 lb (181 kg).

(d) Prohibited area management. (1) Main Hawaiian Islands Longline Fishing Prohibited Area. Longline fishing is prohibited in the portion of the EEZ around Hawaii bounded by straight lines connecting the following coordinated in the order listed:

Point	N. lat.	W. long.
A	18°05′	155°40′
B	18°20′	156°25′
C	20°00′	157°30′
D	20°40′	161°40′
E	21°40′	161°55′
F	23°00′	161°30′
G	23°05′	159°30′
H	22°55′	157°30′
I	21°30′	155°30′
J	19°50′	153°50′
K	19°00′	154°05′
A	18°05′	155°40′

(2) Southern Exclusion Zone. Deep-set longline fishing is prohibited in the Southern Exclusion Zone when the zone is closed to protect false killer whales pursuant to the procedures outlined in paragraph (e) of this section. The Southern Exclusion Zone is the portion of the EEZ around Hawaii bounded by 165° 00′ W. longitude on the west, 154° 30′ W. longitude on the east, the Papahanaumokuakea Marine National Monument and the Main Hawaiian Islands Longline Fishing Prohibited Area on the north, and the EEZ boundary on the south.

(e) Southern Exclusion Zone trigger and procedures. (1) The Assistant Administrator will publish in the Federal Register the expected observer coverage for a fishing year, the potential biological removal level for the Hawaii Pelagic stock of false killer whales, and the associated trigger calculated using the specifications in paragraph (e)(2) of this section. This trigger will remain in effect until superseded by publication of a revised trigger.

(2) As used in this section, trigger means the number of observed false killer whale mortalities or serious injuries in the deep-set longline fishery that occur in the EEZ around Hawaii, and that serves as the bycatch threshold for closing the Southern Exclusion Zone to deep-set longline fishing. The trigger is calculated as the larger of these two values:

(i) Two; or

(ii) The smallest number of observed false killer whale mortalities or serious injuries that, when extrapolated based on the percentage observer coverage in the deep-set longline fishery for that year, exceeds the Hawaii Pelagic false killer whale stock's potential biological removal level.

(3) Unless otherwise subject to paragraph (e)(4) of this section, if there is an observed false killer whale mortality or serious injury in the EEZ around Hawaii on a declared deep-set longline trip that meets the established trigger for a given fishing year, the Southern Exclusion Zone will be closed to deep-set longline fishing until the end of that fishing year.

(4) If during the same calendar year following closure of the Southern Exclusion Zone in accordance with paragraph (e)(3) of this section, there is one observed false killer whale mortality or serious injury on a declared deep-set longline trip anywhere in the EEZ around Hawaii, then NMFS shall immediately convene the False Killer Whale Take Reduction Team.

(5) If in the subsequent calendar year following closure of the Southern Exclusion Zone in accordance with paragraph (e)(3) of this section, there is an observed false killer whale mortality or serious injury in the EEZ around Hawaii on a declared deep-set longline trip that meets the established trigger for a given fishing year, the Southern Exclusion Zone will be closed to deep-set longline fishing until the area is reopened by the Assistant Administrator as per criteria in paragraph (e)(7) of this section.

(6) Upon determining that closing the Southern Exclusion Zone is warranted pursuant to the procedures in paragraphs (e)(1) through (e)(5) of this section, the Assistant Administrator will provide notice to Hawaii longline permit holders and the False Killer Whale Take Reduction Team, publish a notice in the Federal Register, and post information on the NMFS Pacific Islands Regional Office web site. The notice will announce that the fishery will be closed beginning at a specified date, which is not earlier than 7 days and not later than 15 days, after the date of filing the closure notice for public inspection at the Office of the Federal Register.

(7) Reopening criteria. If the Southern Exclusion Zone is closed pursuant to the procedure in paragraphs (e)(1) through (e)(6) of this section, the Assistant Administrator would reopen the Southern Exclusion Zone if one or more of the follow criteria were met:

(i) The Assistant Administrator determines, upon consideration of the False Killer Whale Take Reduction Team's recommendations and evaluation of all relevant circumstances, that reopening of the Southern Exclusion Zone is warranted;

(ii) In the 2-year period immediately following the date of the Southern Exclusion Zone closure, the deep-set longline fishery has zero observed false killer whale incidental mortalities and serious injuries within the remaining open areas of the EEZ around Hawaii;

(iii) In the 2-year period immediately following the date of the closure, the deep-set longline fishery has reduced its total rate of false killer whale incidental mortality and serious injury (including the EEZ around Hawaii, the high seas, and the EEZ around Johnston Atoll (but not Palmyra Atoll) by an amount equal to or greater than the rate that would be required to reduce false killer whale incidental mortality and serious injury within the EEZ around Hawaii to below the Hawaii Pelagic false killer whale stock's potential biological removal level; or

(iv) The average estimated level of false killer whale incidental mortality and serious injury in the deep-set longline fishery within the remaining open areas of the EEZ around Hawaii for up to the 5 most recent years is below the potential biological removal level for the Hawaii Pelagic stock of false killer whales at that time.

(8) Upon determining that reopening the Southern Exclusion Zone is warranted pursuant to the procedures in paragraph (e)(7) of this section, the Assistant Administrator will provide notice to Hawaii longline permit holders and the False Killer Whale Take Reduction Team, publish a notice in the Federal Register, and post information on the NMFS Pacific Islands Regional Office web site. The notice will announce that the fishery will be reopened beginning at a specified date, which is not earlier than 7 days and not later than 15 days, after the date of filing the closure notice for public inspection at the Office of the Federal Register.

(f) Marine mammal handling and release. (1) Each year, both the owner and the operator of a vessel registered for use with a longline permit issued under § 665.801 of this title must attend and be certified for completion of a workshop conducted by NMFS on interaction mitigation techniques for sea turtles, seabirds, and marine mammals, as required under § 665.814 of this title.

(2) Longline vessel operators (captains) must supervise and be in visual and/or verbal contact with the crew during any handling or release of marine mammals.

(3) A NMFS-approved placard setting forth marine mammal handling and/or release procedures must be posted on the longline vessel in a conspicuous place that is regularly accessible and visible to the crew.

(4) A NMFS-approved placard instructing vessel crew to notify the captain in the event of a marine mammal interaction must be posted on the longline vessel in a conspicuous place that is regularly accessible and visible to the crew.

[77 FR 71285, 71286, Nov. 29, 2012, as amended at 77 FR 71286, 71286, Nov. 29, 2012]

Appendix - Figure 1 to Part 229—Drift Gillnet Pinger Configuration and Extender Requirements

[64 FR 3434, Jan. 22, 1999]

authority: 16 U.S.C. 1361

cite as: 50 CFR 229.31