List of substances
| Limitations
|
---|
n-Butyl alcohol
| |
tert-Butyl alcohol
| |
Butyl stearate
| |
Castor oil, sulfated, ammonium, potassium, or sodium salt
| |
Cetyl alcohol
| |
Cyclohexane
| |
Cyclohexanol
| |
Diethylene glycol monolaurate
| |
Diethylene glycol monostearate
| |
Dimers and trimers of unsaturated C18 fatty acids derived from: | For use only at levels not to exceed 0.1% by weight of total coating solids.
|
Animal and vegetable fats and oils.
| |
Tall oil.
| |
Dimethylpolysiloxane
| |
α-(Dinonylphenyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl), containing 7 to 24 moles of ethylene oxide per mole of dinonylphenol (CAS Reg. No. 9014-93-1) | For use only in defoaming agents for the production of styrene-butadiene coatings at a level not to exceed 0.05 percent by weight of the finished coating.
|
Dipropylene glycol
| |
Ethyl alcohol
| |
Fats and oils derived from animal, marine, or vegetable sources:
| |
Fatty acids derived from animal, marine, or vegetable fats and oils, and salts of such acids, single or mixed, as follows:
| |
Aluminum.
| |
Ammonium.
| |
Calcium.
| |
Magnesium.
| |
Potassium.
| |
Sodium.
| |
Zinc.
| |
Formaldehyde | For use as preservative of defoamer only.
|
Glyceryl mono-12-hydroxystearate
| |
Glyceryl monostearate
| |
Hexane
| |
Hexylene glycol (2-methyl-2,4-pentanediol)
| |
Isobutyl alcohol
| |
Isopropyl alcohol
| |
Kerosene
| |
Lecithin hydroxylated
| |
Methyl alcohol
| |
Methylcellulose
| |
Methyl esters of fatty acids derived from animal, marine, or vegetable fats and oils
| |
Methyl oleate
| |
Methyl palmitate
| |
Mineral oil
| |
Mustardseed oil, sulfated, ammonium, potassium, or sodium salt
| |
Myristyl alcohol
| |
Naphtha
| |
β-Naphthol | For use as preservative of defoamer only.
|
Nonylphenol
| |
Odorless light petroleum hydrocarbons | As defined in § 178.3650 of this chapter.
|
Oleic acid, sulfated, ammonium, potassium, or sodium salt
| |
Parachlorometacresol | For use as preservative of defoamer only.
|
Peanut oil, sulfated, ammonium, potassium, or sodium salt
| |
Petrolatum
| |
Pine oil
| |
Polyacrylic acid, sodium salt | As a stabilizer and thickener in defoaming agents containing dimethylpolysiloxane.
|
Polyethylene
| |
Polyethylene, oxidized
| |
Polyethylene glycol (200) dilaurate
| |
Polyethylene glycol (400) dioleate
| |
Polyethylene glycol (600) dioleate
| |
Polyethylene glycol (400) esters of coconut oil fatty acids
| |
Polyethylene glycol (400) monooleate
| |
Polyethylene glycol (600) monooleate
| |
Polyethylene glycol (600) monoricinoleate
| |
Polyethylene glycol (400) monostearate
| |
Polyoxybutylene-polyoxypropylene-polyoxyethylene glycol (min. mol. wt. 3,700)
| |
Polyoxyethylated (min. 3 mols) cetyl alcohol
| |
Polyoxyethylated (min. 5 mols) oleyl alcohol
| |
Polyoxyethylated (min. 1.5 mols) tridecyl alcohol
| |
Polyoxyethylene (min. 15 mols) ester of rosin
| |
Polyoxyethylene (min. 8 mols) monooleate
| |
Polyoxyethylene (40) stearate
| |
Polyoxypropylated (min. 20 mols) butyl alcohol
| |
Polyoxypropylene glycol (min. mol. wt. 200)
| |
Polyoxypropylene (min. 20 mols) oleate butyl ether
| |
Polyoxypropylene-polyoxyethylene glycol (min. mol. wt. 1,900)
| |
Polyoxypropylene (min. 40 mols) stearate butyl ether
| |
Potassium pentachlorophenate | For use as preservative of defoamer only.
|
Potassium trichlorophenate | Do.
|
Propylene glycol monoester of soybean oil fatty acids
| |
Propylene glycol monoester of tallow fatty acids
| |
Ricebran oil, sulfated, ammonium, potassium, or sodium salt
| |
Rosins and rosin derivatives | As provided in § 178.3870 of this chapter.
|
Silica
| |
Sodium 2-mercaptobenzothiazole | For use as preservative of defoamer only.
|
Sodium pentachlorophenate | Do.
|
Sodium trichlorophenate | Do.
|
Sperm oil, sulfated, ammonium, potassium, or sodium salt
| |
Stearyl alcohol
| |
Tall oil fatty acids
| |
Tallow fatty acids, hydrogenated or sulfated
| |
Tallow, sulfated, ammonium, potassium, or sodium salt
| |
Triethanolamine
| |
Triisopropanolamine
| |
Waxes, petroleum | |