Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved incorporation by reference (IBR) material is available for inspection at U.S. EPA and at the National Archives and Records Administration (NARA). Contact U.S. EPA at: U.S. EPA, Air and Radiation Docket and Information Center, WJC West Building, Room 3334, 1301 Constitution Ave. NW, Washington, DC 20460; (202) 566-1742. For information on the availability of this material at NARA, visit: www.archives.gov/federal-register/cfr/ibr-locations.html or email [email protected]. The material may be obtained from the following sources:
(a) American Petroleum Institute (API), 200 Massachusetts Avenue NW, Suite 1100, Washington, DC 20001-5571; (202) 682-8000; www.api.org.
(1) API MPMS 14.1-2016, Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluids Measurement Section 1—Collecting and Handling of Natural Gas Samples for Custody Transfer, 7th Edition, May 2016 (“API MPMS 14.1”); IBR approved for § 80.155(b).
(2) API MPMS 14.3.1-2012, Manual of Petroleum Measurement Standards Chapter 14.3.1—Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square-edged Orifice Meters Part 1: General Equations and Uncertainty Guidelines, 4th Edition, including Errata July 2013, Reaffirmed, July 2022 (“API MPMS 14.3.1”); IBR approved for § 80.155(a).
(3) API MPMS 14.3.2-2016, Manual of Petroleum Measurement Standards Chapter 14.3.2—Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square-edged Orifice Meters Part 2: Specification and Installation Requirements, 5th Edition, March 2016 (“API MPMS 14.3.2”); IBR approved for § 80.155(a).
(4) API MPMS 14.3.3-2013, Manual of Petroleum Measurement Standards Chapter 14.3.3—Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square-edged Orifice Meters Part 3: Natural Gas Applications, 4th Edition, Reaffirmed, June 2021 (“API MPMS 14.3.3”); IBR approved for § 80.155(a).
(5) API MPMS 14.3.4-2019, Manual of Petroleum Measurement Standards Chapter 14.3.4—Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square-edged Orifice Meters Part 4—Background, Development, Implementation Procedure, and Example Calculations, 4th Edition, October 2019 (“API MPMS 14.3.4”); IBR approved for § 80.155(a).
(6) API MPMS 14.12-2017, Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluid Measurement Section 12—Measurement of Gas by Vortex Meters, 1st Edition, March 2017 (“API MPMS 14.12”); IBR approved for § 80.155(a).
Note 1 to paragraph (a):
API MPMS 14.3.1, 14.3.2, 14.3.3, and 141.3.4, are co-published as AGA Report 3, Parts 1, 2, 3, and 4, respectively.
(b) American Public Health Association (APHA), 1015 15th Street NW, Washington, DC 20005; (202) 777-2742; www.standardmethods.org.
(1) SM 2540, revised June 10, 2020; IBR approved for § 80.155(c).
(2) [Reserved]
(c) ASTM International (ASTM), 100 Barr Harbor Dr., P.O. Box C700, West Conshohocken, PA 19428-2959; (877) 909-2786; www.astm.org.
(1) ASTM D975-21, Standard Specification for Diesel Fuel, approved August 1, 2021 (“ASTM D975”); IBR approved for §§ 80.2; 80.1426(f); 80.1450(b); 80.1451(b); 80.1454(l).
(2) ASTM D1250-19e1, Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1, approved May 1, 2019 (“ASTM D1250”); IBR approved for § 80.1426(f).
(3) ASTM D3588-98 (Reapproved 2017)e1, Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels, approved April 1, 2017 (“ASTM D3588”); IBR approved for § 80.155(b) and (f).
(4) ASTM D4057-12, Standard Practice for Manual Sampling of Petroleum and Petroleum Products, approved December 1, 2012 (“ASTM D4057”); IBR approved for § 80.8(a).
(5) ASTM D4177-95 (Reapproved 2010), Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, approved May 1, 2010 (“ASTM D4177”); IBR approved for § 80.8(b).
(6) ASTM D4442-20, Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials, approved March 1, 2020 (“ASTM D4442”); IBR approved for § 80.1426(f).
(7) ASTM D4444-13 (Reapproved 2018), Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters, reapproved July 1, 2018 (“ASTM D4444”); IBR approved for § 80.1426(f).
(8) ASTM D4888-20, Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes, approved December 15, 2020 (“ASTM D4888”); IBR approved for § 80.155(b).
(9) ASTM D5504-20, Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence, approved November 1, 2020 (“ASTM D5504”); IBR approved for § 80.155(b).
(10) ASTM D5842-14, Standard Practice for Sampling and Handling of Fuels for Volatility Measurement, approved January 15, 2014 (“ASTM D5842”); IBR approved for § 80.8(c).
(11) ASTM D5854-96 (Reapproved 2010), Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products, approved May 1, 2010 (“ASTM D5854”); IBR approved for § 80.8(d).
(12) ASTM D6751-20a, Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels, approved August 1, 2020 (“ASTM D6751”); IBR approved for § 80.2.
(13) ASTM D6866-22, Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis, approved March 15, 2022 (“ASTM D6866”); IBR approved for §§ 80.155(b); 80.1426(f); 80.1430(e).
(14) ASTM D7164-21, Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography, approved April 1, 2021 (“ASTM D7164”); IBR approved for § 80.155(a).
(15) ASTM D8230-19, Standard Test Method for Measurement of Volatile Silicon-Containing Compounds in a Gaseous Fuel Sample Using Gas Chromatography with Spectroscopic Detection, approved June 1, 2019 (“ASTM D8230”); IBR approved for § 80.155(b).
(16) ASTM E711-87 (Reapproved 2004), Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter, reapproved 2004 (“ASTM E711”); IBR approved for § 80.1426(f).
(17) ASTM E870-82 (Reapproved 2019), Standard Test Methods for Analysis of Wood Fuels, reapproved April 1, 2019 (“ASTM E870”); IBR approved for § 80.1426(f).
(d) European Committee for Standardization (CEN), Rue de la Science 23, B-1040 Brussels, Belgium; + 32 2 550 08 11; www.cencenelec.eu.
(1) EN 17526:2021(E), Gas meter—Thermal-mass flow-meter based gas meter, approved July 11, 2021 (“EN 17526”); IBR approved for § 80.155(a).
(2) [Reserved]
[88 FR 44563, July 12, 2023]