(a) Approved portable and semi-portable extinguishers must be installed in accordance with table 1 to § 34.50-10(a). The location of the equipment must be, in the opinion of the Officer in Charge, Marine Inspection, convenient in case of emergency. Where special circumstances exist, not covered by table 1 to § 34.50-10(a), the Officer in Charge, Marine Inspection, may require additional equipment as deemed necessary for the proper protection of the vessel.
(b) For additional portable extinguishers as a substitute for sand, see § 34.55-10.
(c) Semi-portable extinguishers must be located in the open so as to be readily seen.
(d) If portable extinguishers are not located in the open or behind glass so that they may be readily seen they may be placed in enclosures together with the firehose, provided such enclosures are marked as required by § 35.40-25 of this subchapter.
(e) Portable extinguishers and their stations must be numbered in accordance with § 35.40-25 of this subchapter.
(f) Portable or semi-portable extinguishers which are required by their nameplates to be protected from freezing must not be located where freezing temperatures may be expected.
(g) Semi-portable extinguishers must be fitted with a suitable hose and nozzle, or other practicable means, so that all portions of the space concerned can be protected.
(h) Table 1 to § 34.50-10(a) indicates the minimum required number and type for each space listed. Extinguishers with larger numerical ratings or multiple letter designations may be used if the extinguishers meet the requirements of the table.
Table 1 to § 34.50-10(a)—Portable and Semi-Portable Extinguishers
Tank ships
| Area
| Tank barges
|
---|
Quantity and location
| Minimum
required
rating
| Minimum
required
rating
| Quantity and location
|
---|
Safety Areas
|
1 required | 20-B:C | Wheelhouse and chartroom areas | | None required.
|
1 required in the vicinity of the exit | 20-B:C
1 | Radio room | | None required.
|
Accommodation Areas
|
1 required in each main passageway on each deck, conveniently located, and so that no room is more than 75 ft from an extinguisher | 2-A | Staterooms, toilet spaces, public spaces, offices, etc., and associated lockers, storerooms, and pantries | 2-A | 1 required in the vicinity of the exit.
|
Service Areas
|
1 required for each 2,500 sq ft or fraction thereof | 40-B:C | Galleys | 40-B:C | 1 required, suitable for the hazard involved.
|
1 required for each 2,500 sq ft or fraction thereof | 40-B | Stores areas, including paint and lamp rooms | | None required.
|
Machinery Area
2
|
2 required
3 | 40-B | Spaces containing oil fired boilers, either main or auxiliary, or any fuel oil units subject to the discharge pressure of the fuel oil service pump | 40-B | 1 required.
12
|
| and
| | | |
1 required | 160-B
4
| | | |
1 required for each 1,000 brake horsepower; not less than 2, not more than 6
5 | 40-B | Spaces containing internal combustion or gas turbine propulsion machinery | | None required.
|
| and
| | | |
1 required
6
7 | 120-B
| | | |
1 required in the vicinity of the exit
7 | 40-B | Auxiliary spaces containing internal combustion or gas turbine units | 40-B | 1 required in the vicinity of the exit.
7
9
12
|
1 required in the vicinity of the exit
8 | 40-B:C | Auxiliary spaces containing emergency generators | | None required.
|
Cargo Areas
|
1 required in the lower pumproom | 40-B | Pumprooms | 40-B | 1 required in the vicinity of the exit.
9
12
|
None required | | Cargo tank area | 40-B | 2 required.
10
12
13
|
| | | 160-B | 1 required.
9
11
|
Spare Units
|
10 percent of required units rounded up | 2-A | | 2-A | 10 percent of required units rounded up.
|
10 percent of required units rounded up | 40-B:C | | 40-B:C | 10 percent of required units rounded up.
|
[USCG-2012-0196, 81 FR 48249, July 22, 2016, as amended by USCG-2020-0519, 89 FR 76695, Sept. 18, 2024]
authority: 46 U.S.C. 3306,
3703; E.O. 12234, 45 FR 58801, 3 CFR, 1980 Comp., p. 277; DHS Delegation No. 00170.1, Revision No. 01.4
source: CGFR 65-50, 30 FR 16694, Dec. 30, 1965, unless otherwise noted.
cite as: 46 CFR 34.50-10