CustomsMobile Pro beta now open!
Apply for a FREE beta account. Spaces are limited so apply today.
The following table lists authorized emissions and maximum power. Power must be determined by direct measurement.
1 The power is measured at the transmitter output terminals and the type of power is determined according to the emission designator as follows:
(i) Mean power (pY) for amplitude modulated emissions and transmitting both sidebands using unmodulated full carrier.
(ii) Peak envelope power (pX) for all emission designators other than those referred to in paragraph (i) of this note.
2 Power and antenna height are restricted to the minimum necessary to achieve the required service.
3 Transmitter power may be increased to overcome line and duplexer losses but must not exceed 25 watts delivered to the antenna.
4 Frequency, emission, and maximum power will be determined after coordination with appropriate Government agencies.
5 To be used with airborne marine equipment certificated for part 80 (ship) and used in accordance with part 87.
6 Applicable onIy to marine frequencies used for public correspondence.
7 Frequency, emission, and maximum power will be determined by appropriate standards during the certification process.
8 Power may not exceed 60 watts per carrier, as measured at the input of the antenna subsystem, including any installed diplexer. The maximum EIRP may not exceed 2000 watts per carrier.
9 Excludes automatic link establishment.
10 Power is limited to 0.5 watt, but may not exceed 2 watts when station is used in an automatic unattended mode.