CLA-2-84:S:N:N1:104 803435
Mr. Hal Verity
JT Joe's International USA, Inc.
5722 Riverside Drive
Daytona Beach, FL 32127
RE: The tariff classification of a fusing press from Japan.
Dear Mr. Verity:
In your letter dated October 17, 1994 on you requested a
tariff classification ruling.
The literature describes the Mini Press Machines as
continuous fusing presses. In addition to the standard models
designated SR-200 (belt width 20cm), SR-300 (30cm belt), etc.,
there is the rolling scraper type designated SR-200KT, the lower
belt long (L Series)type, SR-200L and the lower belt long rolling
scraper type, SR-200LKT. The rolling scraper is at the press
outlet and forcibly separates the fusing parts from the belt to
ensure easy fusing. The L series has a 30cm longer lower belt at
the operator's side. All models are designed with one side open
to allow for partial fusing. Other common features include a
catch device at the inlet of the press adjustable to the
thickness of the material, a direct sensor combined with an
electronic thermostat for accurate temperature control and a
wrinkle preventing device.
The applicable subheading for the Mini Press Machines will
be 8451.30.0000, Harmonized Tariff Schedule of the United States
(HTS), which provides for ironing machines and presses (including
fusing presses). The rate of duty will be 3.9 percent.
This ruling is being issued under the provisions of Section
177 of the Customs Regulations (19 C.F.R. 177).
A copy of this ruling letter should be attached to the entry
documents filed at the time this merchandise is imported. If the
documents have been filed without a copy, this ruling should be
brought to the attention of the Customs officer handling the
transaction.
Sincerely,
Jean F. Maguire
Area Director
New York Seaport