CLA-2 CO:R:C:G 087209 AJS
Mr. John B. Rehm Esq.
Dorsey & Whitney
1330 Connecticut Avenue, N.W.
Suite 200
Washington, D.C. 20036
RE: Digital signal cross-connect equipment; jackfields; pro-
patch; ultra-patch; connectorized terminal block; jack; plug;
patch cord; heading 8517; heading 8536; heading 8544; Explanatory
Note 85.17; apparatus; subheading 8517.81.00; HQ 085661;
Explanatory Note 85.36; subheading 8536.90.00; subheading
8536.69.00; socket; Explanatory Note 85.44.
Dear Mr. Rehm:
This letter is in response to your letter of May 15, 1990,
requesting a tariff classification under the Harmonized Tariff
Schedule of the United States Annotated (HTSUSA).
FACTS:
The merchandise at issue consists of 10 articles which are
principally used for telecommunications purposes. The Digital
Signal Cross-Connect (DSX) equipment forms a centralized cross-
connect (distribution frame) for digital signals. Designed to be
transparent in the digital telephony hierarchy, DSX equipment
permits temporary jack access, cross-connection, reconfiguration
and restoration of various digital circuits. Internal jack
circuits provide input/output connections to each digital signal
level source. The DSX enables patching, terminating and
rearranging of circuits as traffic patterns change and demands on
the communications network grow.
The Wired Assembly, also described as a jackfield, performs
the same function as the DSX equipment except that it is used
-2-
with voice frequency (VF) circuits. They allow monitoring and
testing of VF circuits, on either side of the line (telco or
modem, transmit or receive), without circuit interruption.
The Pro-Patch and Ultra-Patch also perform the same
function as the DSX equipment except that they are used with
audio signals.
The Connectorized Terminal Block (CTB) is used in an analog
or digital circuit to provide for flexible connections between
two or more lines or pieces of equipment.
The next three items are all a type of "jack". Your
literature states that jacks are used to access a communication
circuit at a number of points for purposes of electrical testing,
maintenance, signal monitoring and circuit patching. Accessing
of a communication circuit is described as a point or means of
entry into a circuit or as the action of entering or connecting
to a circuit. Testing of a communication circuit is described as
a procedure or sequence of operations and tests which determine
whether a circuit is operating properly and, if it is not, the
type and location of the trouble. Monitoring a communication
circuit is described as listening to a voice/data communication,
without disturbing it, for the purpose of determining its quality
and freedom from interference or trouble. Patching is described
as a temporary interconnection or rearrangement of communication
circuits using a double-ended patch cord which is plugged into
the jacks on which the circuits are terminated.
The Coaxial Jacks at issue are plugged into coaxial cables
and designed for patching (i.e., interconnecting) or accessing
(i.e., entering or connecting) high frequency signals from dc to
100 MHz. The Printed Circuit Board Jacks at issue are designed
to mount on printed circuit boards whenever access points are
required. The Telephone Jacks at issue function as line, drop
and monitor jacks and are used in 4-wire voice frequency or data
circuit applications.
A plug is used to access (i.e., enter or connect) a jack.
It is a cylindrical connector of either two or three connectors
shaped to actuate the jack spring conductors. They are used to
"loop" or patch (i.e., interconnect) adjacent jack circuits.
A patch cord is a plug or multiple of plugs connected via a
twisted pair cable. The cord is used to conduct a signal so that
a circuit can be monitored, accessed, tested and patched.
ISSUE:
Whether the merchandise in question is properly classifiable
within headings 8517, 8536 or 8544 of the HTSUSA.
-3-
LAW AND ANALYSIS:
Heading 8517, HTSUSA, provides for electrical apparatus for
line telephony or line telegraphy. The electrical apparatus of
this heading encompass "apparatus for the transmission between
two points of speech or other sounds (or of symbols representing
written messages, images or other data), by variation of an
electric current or of an optical wave flowing in a metallic or
dielectric (copper, optical fibres, combination cable, etc.)
circuit connecting the transmitting station to the receiving
station." Explanatory Note (EN) 85.17. This heading covers all
such electrical apparatus designed for this purpose. EN 85.17.
The DSX, Wired Assembly, Pro-Patch and Ultra-Patch (hereinafter
"DSX apparatus") satisfy the terms of this heading.
The term "apparatus" is intended to encompass a group of
devices or a collection or set of materials, instruments or
appliances to be used for a particular purpose or a given end.
ITT Thompson Industries, Inc. v. United States, 3 CIT 36, 44, 537
F. Supp. 1272, 1277-78, aff'd 703 F. 2d 585 (Fed. Cir. 1982).
See also The Deseret Co., v. United States, 10 CIT 609, 611
(1986). The DSX apparatus are principally used within
telecommunication systems for jack access, cross-connection,
reconfiguration and restoration of digital communications
circuits. They are a group of devices used for the particular
purposes of patching, terminating and rearranging of communi-
cations circuits as speech or other sounds are transmitted
between two points. Accordingly, the DSX apparatus satisfy the
description of "apparatus".
You claim that the DSX apparatus are not designed for, nor
play an active role in, the transmission of speech and thus are
excluded from the terms of heading 8517, HTSUSA. We do not agree
with this contention. The DSX apparatus are principally used
within telecommunications circuits. Both speech and data can be
transmitted through the apparatus to transmitting and receiving
stations. The functions of cross-connection and reconfiguration
of communications circuits is done for the purpose of trans-
mitting speech or data between two points. These types of
apparatus satisfy the terms of heading 8517, HTSUSA.
The ENs to heading 8517, HTSUSA, cite numerous examples of
devices, that do not in and of themselves, actively transmit
speech or data. These include such articles as telephone bells
or buzzers, telephone switching devices, devices for memorizing
telephone numbers, devices for holding a connection on line,
devices for listening-in to or breaking into other lines, and
telephone switching devices are all examples of apparatus which
do not actively transmit speech or sound. Accordingly, a device
is not required to actively transmit speech or data in order to
satisfy the terms of heading 8517, HTSUSA.
-4-
Subheading 8517.81.00, HTSUSA, provides for other telephonic
apparatus. Customs has previously ruled that telephonic
apparatus encompass articles which transmit digital signals
representing both speech and data. HQ 085661 (02/15/90). The
DSX apparatus are used in the process of transmitting digital
signals representing telephonic communications, voice and audio
signals. Therefore, the DSX apparatus satisfy the description of
telephonic apparatus and are properly classifiable within this
subheading.
Heading 8536, HTSUSA, provides for "[e]lectrical apparatus
for switching or protecting electrical circuits, or for making
connections to or in electrical circuits (for example, switches,
relays, fuses, surge suppressors, plugs, sockets, lamp-holders,
junction boxes), for a voltage not exceeding 1,000 V." You admit
that the DSX apparatus are not specifically provided for within
this heading. Instead, you claim that the DSX apparatus are
"other electrical apparatus for making connections to or in
electrical circuits". We disagree with this claim for the
following reasons. The DSX apparatus are not one of the examples
listed for these connection apparatus (i.e., switches, relays,
etc.). Furthermore, the ENs to heading 8536 regarding apparatus
for making connections to or in electrical circuits state that
these apparatus are used to connect together the various parts of
an electrical circuit. The DSX apparatus are used for patching,
terminating and rearranging of communications circuits and not
merely making connections in or to electrical circuits. Heading
8536 specifically includes plugs, sockets and other contacts for
connecting a moveable lead or apparatus to an installation which
is usually fixed; other connectors, terminals and terminal
strips; and junction boxes. EN 85.36. The DSX apparatus are
also not similar to any of these items. Accordingly, the DSX
apparatus do not satisfy the terms of this heading and are not
properly classifiable therein.
You claim that the CTB satisfy the terms of heading 8536,
HTSUSA. More specifically, you state that the CTB is described
within subheading 8536.90.00, HTSUSA, as an other apparatus for
making connections to or in electrical circuits. The CTB
satisfies the terms of this subheading. It provides for flexible
connections between two or more lines or pieces of equipment.
You also claim that the subject jacks are described within
subheading 8536.69.00, HTSUSA, as sockets. These apparatus are
used for connecting a moveable lead or apparatus to an
installation which is usually fixed. EN 85.36(III)(A). The
jacks at issue satisfy the terms of this subheading. They are
used to enter or connect to a circuit.
Subheading 8536.69.00, HTSUSA, additionally provides for
plugs which connect a moveable lead or apparatus to an
-5-
installation. You claim that the subject plugs are "plugs"
within the meaning of this subheading. The plug at issue is used
to enter or connect to a circuit. Therefore, we agree that the
plug in question satisfies the terms of this subheading.
Heading 8544, HTSUSA, provides for insulated electrical
conductors, whether or not fitted with connectors. This heading
covers electric cable used as a conductor in electrical
apparatus. EN 85.44. This cable remains classified in this
heading if cut to length or fitted with connectors. EN 85.44.
The patch cord is a plug or multiple of conductor plugs connected
via a twisted pair cable. However, plugs assembled with a length
of wire are excluded from heading 8536, HTSUSA, and instead
classifiable within heading 8544, HTSUSA. EN 85.36(III)(A). The
subject patch cord is used to conduct a signal so that a circuit
can be monitored, accessed, tested and patched. Accordingly, the
patch cord satisfies the terms of this heading. More
specifically, they are provided for within subheading 8544.51.80,
HTSUSA, which provides for electric conductors for a voltage
exceeding 80 V but not exceeding 1,000 V.
HOLDING:
The DSX, Wired Assembly, Pro-Patch and Ultra-Patch are
properly classifiable within subheading 8517.81.00, HTSUSA, which
provides for telephonic apparatus dutiable at the rate of 8.5
percent ad valorem.
The Connectorized Terminal Block is properly classifiable
within subheading 8536.90.00, HTSUSA, which provides for sockets
dutiable at the rate of 5.3 percent ad valorem.
The Coaxial, Printed-Circuit and Telephone Jacks are
properly classifiable within subheading 8536.69.00, HTSUSA, which
provides for apparatus for making connections to or in
electrical circuits dutiable at the rate of 5.3 percent ad
valorem. The plugs are also classifiable within this subheading.
The patch cord is properly classifiable within subheading
8544.51.80, HTSUSA, which provides for electric conductors, for a
voltage exceeding 80 V but not exceeding 1,000 V, fitted with
connectors, dutiable at the rate of 5.3 percent ad valorem.
Sincerely,
John Durant, Director
Commercial Rulings Division