CLA-2 CO:R:C:M 951157 LTO
District Director
U.S. Customs Service
Lincoln Juarez Bridge, Bldg. 2
P.O. Box 3130
Laredo, Texas 78044-3130
RE: Protest No. 2304-91-000010; electric heating resistors; EN
85.16
Dear Sir:
This protest concerns the classification of electric heating
elements under the Harmonized Tariff Schedule of the United
States (HTSUS).
FACTS:
The articles in question consist of a variety of heating
elements. The elements are specifically designed for use with
particular ranges (range surface elements) and ovens (bake and
broil elements). A sample of a range surface heating element was
provided by the protestant.
Based on this sample, the Chicago Customs Laboratory found
that the article in question consisted of a hollow metal coil
(black "casing") containing a resistance wire surrounded by a
white refractory material, which is in powder form. The hollow
metal coil consists of an alloy of iron, chromium and manganese.
The white refractory material is composed of magnesium oxide.
The wire constitutes the heating resistor.
In operation, heat dissipates from the wire to the
refractory material and, finally, to the metal coil. The
refractory material serves to insulate the wire and to facilitate
the even distribution of heat to the metal coil. The metal coil
provides a flat, solid surface upon which to place a cooking
utensil. - 2 -
The articles in question were entered under various
provisions for parts under Heading 8516, HTSUS. The merchandise
was classified upon liquidation under subheading 8516.80.80,
HTSUS, which provides for other electric heating resistors.
ISSUE:
Whether the heating elements are classifiable as "electric
heating resistors," under Heading 8516, HTSUS.
LAW AND ANALYSIS:
The General Rules of Interpretation (GRI's) to the HTSUS
govern the classification of goods in the tariff schedule. GRI 1
states in pertinent part that "for legal purposes, classification
shall be determined according to the terms of the headings and
any relative section or chapter notes . . . ."
Heading 8516, HTSUS, provides for "electric heating
resistors." The Harmonized Commodity Description and Coding
System Explanatory Note (EN) to Heading 8516, HTSUS, pg. 1360,
states that "all electrical heating resistors are classified
here, irrespective of the classification of the apparatus or
equipment in which they are to be used." The note also provides
that "[w]ire resistors are usually mounted on insulating formers
(e.g., of ceramics, steatite, mica or plastics) or on soft
insulating core (e.g., of glass fibres or asbestos)."
The articles which are the subject of this protest are a
variety of heating elements designed for use with particular
ranges and ovens. They consist of a hollow metal coil (black
"casing") containing a resistance wire surrounded by a refractory
material. The resistance wire constitutes the electric heating
resistor. The hollow metal coil consisting of an alloy of iron,
chromium and manganese, constitutes the insulating former.
EN 85.16, pg. 1360, states that resistors remain classified
under Heading 8516, HTSUS, "if specialised for a particular
machine or apparatus, but if assembled with parts other than a
simple insulated former and electrical connections they are
classified as parts of the machines or apparatus in question
(e.g., base plates for smoothing irons and plates for electric
cookers) [underlining added]."
According to EN 85.16, those heating elements, for both
range surfaces and ovens, that do not contain any additional
parts other than an insulated former and electrical connections
are classifiable as other electric heating resistors under
subheading 8516.80.80, HTSUS. However, many of the heating - 3 -
elements in question are assembled with additional parts other
than an insulated former and electrical connections.
In light of the examples in EN 85.16 of the additional parts
that would require classification of a particular resistor as a
part (base plates for smoothing irons and plates for electric
cookers), we believe that subheading 8516.80.80, HTSUS, also
encompasses resistors that are assembled with certain parts other
than an insulated former and electrical connections.
In the instant case, several models of heating resistors for
both range surfaces and ovens are assembled with support
brackets, as well as, an insulated former and electrical
connections. It is our opinion that these support brackets do
not perform a function that is similar to, or a function as
substantial as, that performed by the examples listed in EN
85.16. Therefore, these heating elements are also classifiable
under subheading 8516.80.80, HTSUS.
However, it is our opinion that the heating elements for
range surfaces that are assembled with metallic caps, drip pans
or trim rings, in addition to an insulated former, electrical
connections and support brackets, are not covered by subheading
8516.80.80, HTSUS, and must be classified as parts of ranges
under subheading 8516.90.20, HTSUS (none of the heating elements
for ovens are classifiable as parts).
In HQ 085280, dated November 9, 1989, this office determined
that certain electric stove-top heating elements that were
assembled with electrical connections, an insulated former, a Y-
shaped support bracket and a metallic cap, were classifiable as
electric heating resistors under subheading 8516.80.80, HTSUS.
For the reasons stated above, HQ 085280 does not reflect the
current position of the Customs Service and will be modified.
HOLDING:
Heating elements for range surfaces and ovens that are
assembled with an insulated former and electrical connections,
and heating elements assembled with an insulated former,
electrical connections and support brackets, are classifiable
under subheading 8516.80.80, HTSUS, which provides for other
electric heating resistors. The corresponding rate of duty for
articles of this subheading is 3.9% ad valorem.
Heating elements for range surface that are assembled with
parts other than electrical connections, insulated former and
support brackets, such as, metallic caps, drip pans and trim
rings, are classifiable under subheading 8516.90.20, HTSUS, which
- 4 -
provides for parts of stoves, ranges and ovens. The
corresponding rate of duty for articles of this subheading is
free.
Accordingly, the protest should be granted to the extent
reclassification of the merchandise as indicated above results in
a net duty reduction or partial allowance. A copy of this
decision should be attached to the Customs Form 19 and provided
to the protestant as part of the notice of action on the protest.
Sincerely,
John Durant, Director