CLA-2 R:C:M 957779 DFC
District Director of Customs
511 Broadway
Room 0198
Portland OR 97209
RE: Protest 2904-95-100074; Cam gears; Hay baler, parts;
Agricultural machinery
Dear District Director:
This is in response to Protest 2904-95-100074 concerning
your action in classifying and assessing duty on cam gears for
hay balers.
FACTS:
The cam gear involved is a component part used in the
knotter drive assembly of a hay baling machine. The unit is
disc-shaped and contains two partial sets of gears as well as an
actuating cam. When the knotter shaft is rotated, the first gear
engages a separate pinion gear which moves as "bill hook" (a
device for making a knot), while the second gear engages another
pinion gear that advances the twine. The cam portion of this
unit activates the knife arm, cutting the twine. The two entries
covering this merchandise were liquidated on December 16, 1994,
and January 20, 1995, under subheading 8483.90.50, Harmonized
Tariff Schedule of the United States (HTSUS), which provides for
parts of gearing, gear boxes and other speed changers. The
protest against these liquidations was timely filed on March 9,
1995.
The protestant claims that the cam gears should be
classified as parts of agricultural machinery. However, he did
not specify what subheading of the HTSUS described this
merchandise. We assume that his claim for classification of the
cam gears is under subheading 8433.90.50, HTSUS, which provides
for parts of harvesting or threshing machinery, other.
ISSUE:
Whether the cam gears should be classified as parts of
harvesting or threshing machinery under subheading 8433.90.50,
HTSUS, or under subheading 8483.90.50, HTSUS, as parts of
gearing, gear boxes and other speed changers.
LAW AND ANALYSIS:
Classification of goods under the HTSUS is governed by
the General Rules of Interpretation (GRI's). GRI 1 provides that
"classification shall be determined according to the terms of the
headings and any relative section or chapter notes, and, provided
such headings or notes do not otherwise require, according to
[the remaining GRI's]." In other words, classification is
governed first by the terms of the headings of the tariff and any
relative section or chapter notes.
The competing provisions are as follows:
8433 Harvesting or threshing machinery, including straw or
fodder balers; . . . parts thereof:
* * *
8433.90 Parts:
* * *
8433.90.50 Other . . . . . .
* * *
8483 Transmission shafts (including camshafts and
crankshafts) and cranks; . . . gears and gearing, ball
screws; gear boxes and other speed changers, including
torque converters; flywheels and pulleys, including
pulley blocks; clutches and shaft couplings (including
universal joints); parts thereof:
8483.90 Parts:
* * *
8483.90.50 Parts of gearing, gear boxes and other
speed changers . . . . . .
The basis for the protestant's claim that the cam gears are
classifiable as parts of agricultural machinery is that they are
made for use solely on hay balers and will not function as a gear
for anything else.
Note 2(a) to Section XVI, HTSUS, which is relevant, reads,
as follows:
2. Subject to note 1 to this section, note 1 to chapter 84
and to note 1 to chapter 85, parts of machines (not
being parts of the articles of heading 8484, 8544,
8545, 8546 or 8547) are to be classified according to
the following rules:
(a) Parts which are goods included in any of the
headings of chapters 84 and 85 (other than heading
8485 and 8548) are in all cases to be classified
in their respective headings[.]
The Harmonized Commodity Description and Coding System
Explanatory Notes to the HTSUS (EN), although not dispositive, or
legally binding, provide a commentary on the scope of each
heading of the HTSUS, and are generally indicative of the proper
interpretation of the HTSUS. See T.D. 89-80, 54 FR 35127, 35128
(August 23, 1989). The EN to Heading 84.83 at page 1328, which
is also relevant, reads in pertinent part, as follows:
The heading also excludes:
* * *
(b) Transmission equipment of the kinds described above
(gear boxes, transmission shafts, clutches,
differentials , etc.), but which are designed for use
solely or principally with vehicles or aircraft
(Section XVII); it should, however, be noted that this
exclusion does not apply to internal parts of vehicle
or aircraft engines-these parts remain classified in
this heading.
The two models involved are known and used as gears.
Heading 8483, HTSUS, cited above, specifically provides for
transmission components, among which are gears, gearboxes,
speedchangers and parts thereof. Inasmuch as these gears are for
use in agricultural machinery, the exclusionary language of the
EN to heading 84.83, cited above, which excludes transmission
equipment used solely for vehicles or aircraft of Section XVII,
HTSUS, does not apply here. Consequently, it is our opinion that
the cam gears for hay balers are classifiable under subheading
8483.90.50, HTSUS, as parts of gearing, gear boxes and other
speed changers.
HOLDING:
The cam gears for hay balers are dutiable at the rate of
2.5% ad valorem under subheading 8483.90.50, HTSUS.
The protest should be denied. In accordance with
Section 3A(11)(b) of Customs Directive 099 3550-065, dated August
4, 1993, Subject: Revised Protest Directive, this decision
together with the Customs Form 19, should be mailed by your
office to the protestant no later than 60 days from the date of
this letter. Any reliquidation of the entry in accordance with
the decision must be accomplished prior to mailing of the
decision. Sixty days from the date of the decision the Office of
Regulations and Rulings will take steps to make the decision
available to Customs personnel via the Customs Rulings Module in
ACS and the public via the Diskette Subscription Service, Freedom
of Information Act and other public access channels.
Sincerely,
John Durant, Director
Commercial Rulings Division