CLA-2-84:S:N:N1:104 878799
8458.19.0050; 8460.29.0010; 8537.10.0060; 9031.80.0080
Mr. Harry Paskewicz
92 County Line Road
Colmar, PA 18915-9607
RE: The tariff classification of machinery from France, Germany,
Italy and Sweden.
Dear Mr. Paskewicz:
In your letter dated September 25, 1992 you requested a
tariff classification ruling.
Item 1 is a rod loading magazine, model AS325/62CT (Italy).
The magazine will accept a quantity of full length rod bar stock
and automatically dispense one length at a time to Item 2, the
Traub cam-controlled automatic screw machine (Germany). The Traub
Model TD26 is a non-CNC, single spindle machine. Nine rod loading
magazines will be shipped to Germany and combined with nine screw
machines. Items 1 and 2 will then be shipped to the U.S.
Items 3 and 5 are belt type rod conveyors. Item 4 is a rod
hopper/step conveyor assembly (also described as a vertical
walking beam conveyor). Item 8 is a rod stacking mechanism which
stacks the rods in a cage type metal container. These items are
all made in Germany and do not have full "on board" controls. A
separate programmable controller will control these machines as
well as other equipment not part of this ruling request.
Item 6 is a Lidkoping Model 630 Centreless Grinder. Two of
these non-CNC grinding machines will be shipped directly from
Sweden. The belt type rod conveyors feeding the rods to the
grinders will be imported separately from Germany.
Item 7 is described as an automatic compensation system
(France) that measures rod diameters and automatically provides a
signal for compensation (diameter correction). The system
consists of a ring type pneumatic transducer and an electronic
computing module. Two of these systems will be integrated with
the two grinders above after importation. They will not be
shipped with the grinders.
The rod loading magazines, item 1, will be classified with
the screw machines, item 2, as a functional unit under subheading
8458.19.0050, Harmonized Tariff Schedule of the United States
(HTS), which provides for other horizontal lathes for removing
metal. The rate of duty will be 4.4 percent ad valorem.
The applicable subheading for Items 3 and 5, the belt type
rod conveyors, will be 8428.33.0000, HTS, which provides for
other conveyors, belt type. The rate of duty will be 2 percent.
The rod hopper/step conveyor assembly is classified under
8428.39.0000, HTS, which provides for other conveyors, other. The
rate of duty will be 2 percent.
The applicable subheading for Item 8, the automatic rod
stacking mechanism, will be 8422.30.9040, HTS, which provides for
machinery for filling bottles, cans or similar containers. The
rate of duty will be 3.6 percent.
The programmable controller which controls items 3,4,5 and 8
will be classified under HTS subheading 8537.10.0060 which
provides for other bases, equipped with two or more apparatus of
heading 8535 or 8536, for electric control or the distribution of
electricity: For a voltage not exceeding 1,000 V ... Other ...
Programmable controllers. The rate of duty will be 5.3 percent.
The applicable subheading for Item 6, the Lidkoping
grinders, will be 8460.29.0010, HTS, which provides for other
grinding machines, in which the positioning in any one axis can
be set up to an accuracy of at least 0.01 mm: other. The rate of
duty will be 4.4 percent.
The applicable subheading for item 7, the automatic
compensation system, will be 9031.80.0080, HTS, which provides
for measuring or checking instruments, appliances, and machines,
not specified or included elsewhere in this chapter. The rate of
duty will be 4.9 percent.
This ruling is being issued under the provisions of Section
177 of the Customs Regulations (19 C.F.R. 177).
A copy of this ruling letter should be attached to the entry
documents filed at the time this merchandise is imported. If the
documents have been filed without a copy, this ruling should be
brought to the attention of the Customs officer handling the
transaction.
Sincerely,
Jean F. Maguire
Area Director
New York Seaport