CLA-2-84:RR:NC:1:102 E80129
TARIFF NO. 8482.10.5044, 8482.10.5048
Ms. Brenda Schneider
FCI (Tampa) L.C.
2701 N. Rocky Point Drive (Suite 990)
Tampa, Florida 33607-5924
RE: The tariff classification of ball bearings from China.
Dear Ms. Schneider:
In your letter dated March 23,1999 you requested a tariff classification ruling on behalf of FCI (Tampa).
The items in question are ball bearings. Samples and descriptive literature were submitted. The part number and outside diameter of the outer race of each of the samples is listed below.
Part Numbers Outside Diameter
7R3 13 mm
608-Z, 608-2RS 22 mm
6200-Z, 6200-RS 30 mm
6201-Z, 6201-RZ 32 mm
6202-Z, 6202-RZ 35 mm
6203-Z, 6203-RZ 40 mm
6204-Z, 6204-RZ 47 mm
6205-Z, 6205-RZ 52 mm
6205-2RS-1 52 mm
Each of the subject ball bearings is designed to support a radial load and consists of a single row of caged rolling elements within inner and outer races of ground steel.
The applicable subheading for the 7R3, 608-Z, 608-2RS, 6200-Z and 6200-RS bearings will be 8482.10.5044, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other single row, radial ball bearings, having an outside diameter 9 mm and over, but not over 30 mm. The rate of duty will be 9 percent ad valorem.
The applicable subheading for the 6201-Z, 6201-RZ, 6202-Z, 6202-RZ, 6203-Z, 6203-RZ, 6204-Z, 6204-RZ 6205-Z, 6205-RZ and 6205-2RS-1 bearings will be 8482.10.5048, HTSUS, which provides for other single row, radial ball bearings, having an outside diameter over 30 mm, but not over 52 mm. The rate of duty will be 9 percent ad valorem.
It is the opinion of this office that the bearings listed above are not subject to antidumping duties because ball bearings which originate from China are not within the scope of current orders of the Department of Commerce relating to antifriction bearings. Should you desire a binding ruling on the applicability of dumping orders to your merchandise, please write directly to the Department of Commerce, Office of Compliance, Washington, D.C.
This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 CFR 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Kenneth T. Brock at 212-637-7026.
Sincerely,
Robert B. Swierupski
Director,
National Commodity
Specialist Division