CLA-2-62:OT:RR:NC:3:353
Mr. Francisco Ramirez, Jr.
ACE Group, Automated Commercial Experts
9163 Siempre Viva Rd.
San Diego, CA 92154
RE: Classification and country of origin determination for a ballistic panel; 19 CFR 102.21(c)(2); tariff shift; the status under the North American Free Trade Agreement (NAFTA); Article 509
Dear Mr. Ramirez:
This is in reply to your letter dated November 9, 2007, on behalf of Safariland, Ltd., requesting a classification, country of origin determination and status under the NAFTA for a ballistic panel which will be imported into the United States.
FACTS:
The subject merchandise consists of a Model MLAW-II-LGL Ballistic Panel constructed of an outer shell of woven Gore-Tex fabric with a plastic backing; the outer shell surrounds 3 inner ballistic layers of woven Kevlar fabric. The ballistic chest panel will be sold in the United States as a replacement panel for a ballistic garment.
The manufacturing operations for the Model MLAW-II-LGL are as follows:
Fabric and components, originating in the United States or Canada are shipped from Canada to Mexico where the Ballistic Panel is manufactured. In Mexico, the fabric is cut to shape and the garment is sewn and assembled.
ISSUE:
What are the classification, country of origin and status under the NAFTA of the subject merchandise?
CLASSIFICATION:
The applicable tariff provision for the Model MLAW-II-LGL Ballistic Panel will be 6217.90.9085, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Other made up clothing accessories; Parts of garments or of clothing accessories…Parts: Other, Other: Of man-made fibers.” The general rate of duty will be 14.6% ad valorem.
Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/.
COUNTRY OF ORIGIN - LAW AND ANALYSIS:
Section 334 of the Uruguay Round Agreements Act (codified at 19 U.S.C. 3592), enacted on December 8, 1994, and provided rules of origin for textiles and apparel entered, or withdrawn from warehouse for consumption, on and after July 1, 1996. Section 102.21, Customs Regulations (19 C.F.R. 102.21), published September 5, 1995 in the Federal Register, implements Section 334 (60 FR 46188). Section 334 of the URAA was amended by section 405 of the Trade and Development Act of 2000, enacted on May 18, 2000, and accordingly, section 102.21 was amended (68 Fed. Reg. 8711). Thus, the country of origin of a textile or apparel product shall be determined by the sequential application of the general rules set forth in paragraphs (c)(1) through (5) of Section 102.21.
Paragraph (c)(1) states, “The country of origin of a textile or apparel product is the single country, territory, or insular possession in which the good was wholly obtained or produced.” As the subject merchandise is not wholly obtained or produced in a single country, territory or insular possession, paragraph (c)(1) of Section 102.21 is inapplicable.
Paragraph (c)(2) states, “Where the country of origin of a textile or apparel product cannot be determined under paragraph (c)(1) of this section, the country of origin of the good is the single country, territory, or insular possession in which each of the foreign materials incorporated in that good underwent an applicable change in tariff classification, and/or met any other requirement, specified for the good in paragraph (e) of this section:” Paragraph (e) in pertinent part states,
The following rules shall apply for purposes of determining the country of origin of a textile or apparel product under paragraph (c)(2) of this section:
HTSUS Tariff shift and/or other requirements
6215–6217 (1) If the good consists of two or more component parts, a change to an assembled good of heading 6215 through 6217 from unassembled components, provided that the change is the result of the good being wholly assembled in a single country, territory, or insular possession.
As the Model MLAW-II-LGL Ballistic Panel is assembled in a single country, that is, Mexico, as per the terms of the tariff shift requirement, country of origin is conferred in Mexico.
The Model MLAW-II-LGL Ballistic Panel falls within textile category 659. With the exception of certain products of China, quota/visa requirements are no longer applicable for merchandise which is the product of World Trade Organization (WTO) member countries. Quota and visa requirements are the result of international agreements that are subject to frequent renegotiations and changes. To obtain the most current information on quota and visa requirements applicable to this merchandise, we suggest you check, close to the time of shipment, the “Textile Status Report for Absolute Quotas” which is available on our web site at www.cbp.gov. For current information regarding possible textile safeguard actions on goods from China and related issues, we refer you to the web site of the Office of Textiles and Apparel of the Department of Commerce at otexa.ita.doc.gov.
NAFTA
.
General Note 12(b), HTSUS, sets forth the criteria for determining whether a good is originating under the NAFTA. General Note 12(b), HTSUS, (19 U.S.C. § 1202) states, in pertinent part, that
For the purposes of this note, goods imported into the customs territory of the United States are eligible for the tariff treatment and quantitative limitations set forth in the tariff schedule as "goods originating in the territory of a NAFTA party" only if--
(i) they are goods wholly obtained or produced entirely in the territory of Canada, Mexico and/or the United States; or
(ii) they have been transformed in the territory of Canada, Mexico and/or the United States so that--
(A) except as provided in subdivision (f) of this note, each of the non-originating materials used in the production of such goods undergoes a change in tariff classification described in subdivisions (r), (s) and (t) of this note or the rules set forth therein, or
(B) the goods otherwise satisfy the applicable requirements of subdivisions (r), (s) and (t) where no change in tariff classification is required, and the goods satisfy all other requirements of this note; or
(iii) they are goods produced entirely in the territory of Canada, Mexico and/or the United States exclusively from originating materials; or
(iv) they are produced entirely in the territory of Canada, Mexico and/or the United States but one or more of the nonoriginating materials falling under provisions for "parts" and used in the production of such goods does not undergo a change in tariff classification because--
(A) the goods were imported into the territory of Canada, Mexico and/or the United States in unassembled or disassembled form but were classified as assembled goods pursuant to general rule of interpretation 2(a), or
(B) the tariff headings for such goods provide for and specifically describe both the goods themselves and their parts and is not further divided into subheadings, or the subheadings for such goods provide for and specifically describe both the goods themselves and their parts,
provided that such goods do not fall under chapters 61 through 63, inclusive, of the tariff schedule, and provided further that the regional value content of such goods, determined in accordance with subdivision (c) of this note, is not less than 60 percent where the transaction value method is used, or is not less than 50 percent where the net cost method is used, and such goods satisfy all other applicable provisions of this note.
The Model MLAW-II-LGL Ballistic Panel being made entirely in the territory of Mexico using materials which themselves were originating, will satisfy the requirements of HTSUS General Note 12(b)(iii). The merchandise will therefore be entitled to a free rate of duty under the NAFTA upon compliance with all applicable laws, regulations, and agreements.
This ruling is being issued under the provisions of Parts 177 and 181 of the Customs Regulations (19 C.F.R. 177 and 181). Should it be subsequently determined that the information furnished is not complete and does not comply with 19 CFR 177.9(b)(1), the ruling will be subject to modification or revocation. In the event there is a change in the facts previously furnished, this may affect the determination of country of origin. Accordingly, if there is any change in the facts submitted to Customs, it is recommended that a new ruling request be submitted in accordance with 19 CFR 177.2
A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Kenneth Reidlinger at 646-733-3053.
Sincerely,
Robert B. Swierupski
Director,
National Commodity
Specialist Division