CLA-2-84:OT:RR:NC:N1:106
Steven R. Keller, Corporate Manufacturing Services Manager
Cascade Corporation
2201 NE 201st Avenue
Fairview, OR 97024-9718
RE: The tariff classification of a coupler body part from China
Dear Mr. Keller,
In your letter dated December 11, 2013, you requested a tariff classification ruling. As per your request, the sample which you provided to this office is being returned to your attention.
The item being considered has been identified as a Wedgeplate (Part # PN 04CSM-070-2). You state in your request that the Wedgeplate is used as a component of a Wedgelock Coupler Unit (N240343, April 16, 2013). It is used as a locking wedge devise which will extend through the Wedgelock Coupler Body to lock/wedge a pin into place. The Wedgeplate helps to secure the upper pin mounting of a digging bucket or other backhoe type attachment. The Wedgeplate measures approximately 8 inches by 6.5 inches, weighs approximately 14 pounds and is constructed of a high alloy, low carbon steel which is a Bisalloy Steel Grade 80. It is rectangular in shape with a hollow, threaded circular mounting base, measuring approximately 4 inches in length. Each side of the rectangular plate has one pre-drilled hole. The Wedgeplate can be used as a replacement part for the complete Wedgelock Coupler Unit.
The applicable classification subheading for the Wedgeplate (Part # PN 04CSM-070-2) will be 8431.49.9040, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Parts suitable for use solely or principally with the machinery of heading 8425 to 8430: Of machinery of heading 8426, 8429 or 8430: Other: Other: Other: Other.” The general rate of duty will be Free.
Duty rates are provided for your convenience and are subject to change. The text of the most recent Harmonized Tariff Schedule of the United States and the accompanying duty rates are provided on the World Wide Web at http://www.usitc.gov/tata/hts/.
This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177).
A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding this ruling, please contact National Import Specialist Matthew Sullivan at 646-733-3013.
Sincerely,
Gwenn Klein Kirschner
Acting Director
National Commodity Specialist Division