§ 5112.
(a)
The Secretary of the Treasury may mint and issue only the following coins:
(1)
a dollar coin that is 1.043 inches in diameter.
(2)
a half dollar coin that is 1.205 inches in diameter and weighs 11.34 grams.
(3)
a quarter dollar coin that is 0.955 inch in diameter and weighs 5.67 grams.
(4)
a dime coin that is 0.705 inch in diameter and weighs 2.268 grams.
(5)
a 5-cent coin that is 0.835 inch in diameter and weighs 5 grams.
(6)
except as provided under subsection (c) of this section, a one-cent coin that is 0.75 inch in diameter and weighs 3.11 grams.
(7)
A fifty dollar gold coin that is 32.7 millimeters in diameter, weighs 33.931 grams, and contains one troy ounce of fine gold.
(8)
A twenty-five dollar gold coin that is 27.0 millimeters in diameter, weighs 16.966 grams, and contains one-half troy ounce of fine gold.
(9)
A ten dollar gold coin that is 22.0 millimeters in diameter, weighs 8.483 grams, and contains one-fourth troy ounce of fine gold.
(10)
A five dollar gold coin that is 16.5 millimeters in diameter, weighs 3.393 grams, and contains one-tenth troy ounce of fine gold.
(11)
A $50 gold coin that is of an appropriate size and thickness, as determined by the Secretary, weighs 1 ounce, and contains 99.99 percent pure gold.
(12)
A $25 coin of an appropriate size and thickness, as determined by the Secretary, that weighs 1 troy ounce and contains .9995 fine palladium.
(n)
Redesign and Issuance of Circulating $1 Coins Honoring Each of the Presidents of the United States.—
(1)
Redesign beginning in 2007.—
Notwithstanding subsection (d) and in accordance with the provisions of this subsection, $1 coins issued during the period beginning January 1, 2007, and ending upon the termination of the program under paragraph (8), shall—
(A)
have designs on the obverse selected in accordance with paragraph (2)(B) which are emblematic of the Presidents of the United States; and
(B)
have a design on the reverse selected in accordance with paragraph (2)(A).
(2)
Design requirements.—
The $1 coins issued in accordance with paragraph (1)(A) shall meet the following design requirements:
(A)
Coin reverse.—
The design on the reverse shall bear—
(i)
a likeness of the Statue of Liberty extending to the rim of the coin and large enough to provide a dramatic representation of Liberty while not being large enough to create the impression of a “2-headed” coin;
(ii)
the inscription “$1”; and
(iii)
the inscription “United States of America”.
(B)
Coin obverse.—
The design on the obverse shall contain—
(i)
the name and likeness of a President of the United States; and
(ii)
basic information about the President, including—
(I)
the dates or years of the term of office of such President; and
(II)
a number indicating the order of the period of service in which the President served.
(C)
Edge-incused inscriptions.—
(i)
In general.—
The inscription of the year of minting or issuance of the coin and the inscription “E Pluribus Unum” shall be edge-incused into the coin.
(ii)
Preservation of distinctive edge.—
The edge-incusing of the inscriptions under clause (i) on coins issued under this subsection shall be done in a manner that preserves the distinctive edge of the coin so that the denomination of the coin is readily discernible, including by individuals who are blind or visually impaired.
(D)
Inscriptions of “liberty”.—
Notwithstanding the second sentence of subsection (d)(1), because the use of a design bearing the likeness of the Statue of Liberty on the reverse of the coins issued under this subsection adequately conveys the concept of Liberty, the inscription of “Liberty” shall not appear on the coins.
(E)
Limitation in series to deceased presidents.—
No coin issued under this subsection may bear the image of a living former or current President, or of any deceased former President during the 2-year period following the date of the death of that President.
(F)
Inscription of “in god we trust”.—
The design on the obverse or the reverse shall bear the inscription “In God We Trust”.
(3)
Issuance of coins commemorating presidents.—
(A)
Order of issuance.—
The coins issued under this subsection commemorating Presidents of the United States shall be issued in the order of the period of service of each President, beginning with President George Washington.
(B)
Treatment of period of service.—
(i)
In general.—
Subject to clause (ii), only 1 coin design shall be issued for a period of service for any President, no matter how many consecutive terms of office the President served.
(ii)
Nonconsecutive terms.—
If a President has served during 2 or more nonconsecutive periods of service, a coin shall be issued under this subsection for each such nonconsecutive period of service.
(4)
Issuance of coins commemorating 4 presidents during each year of the period.—
(A)
In general.—
The designs for the $1 coins issued during each year of the period referred to in paragraph (1) shall be emblematic of 4 Presidents until each President has been so honored, subject to paragraph (2)(E).
(B)
Number of 4 circulating coin designs in each year.—
The Secretary shall prescribe, on the basis of such factors as the Secretary determines to be appropriate, the number of $1 coins that shall be issued with each of the designs selected for each year of the period referred to in paragraph (1).
(5)
Legal tender.—
The coins minted under this title shall be legal tender, as provided in section 5103.
(6)
Treatment as numismatic items.—
For purposes of section
1
So in original. Probably should be “sections”.
5134 and 5136, all coins minted under this subsection shall be considered to be numismatic items.
(7)
Issuance of numismatic coins.—
The Secretary may mint and issue such number of $1 coins of each design selected under this subsection in uncirculated and proof qualities as the Secretary determines to be appropriate.
(8)
Termination of program.—
The issuance of coins under this subsection shall terminate when each President has been so honored, subject to paragraph (2)(E), and may not be resumed except by an Act of Congress.
(9)
Reversion to preceding design.—
Upon the termination of the issuance of coins under this subsection, the design of all $1 coins shall revert to the so-called “Sacagawea-design” $1 coins.
(p)
Removal of Barriers to Circulation of $1 Coin.—
(1)
Acceptance by agencies and instrumentalities.—
Beginning January 1, 2006, all agencies and instrumentalities of the United States, the United States Postal Service, all nonappropriated fund instrumentalities established under title 10, and all transit systems that receive operational subsidies or any disbursement of funds from the Federal Government, such as funds from the Federal Highway Trust Fund, including the Mass Transit Account, shall take such action as may be appropriate to ensure that by the end of the 2-year period beginning on such date—
(A)
any business operations conducted by any such agency, instrumentality, system, or entity that involve coins or currency will be fully capable of—
(i)
accepting $1 coins in connection with such operations; and
(ii)
other than vending machines that do not receive currency denominations higher than $1, dispensing $1 coins in connection with such operations; and
(B)
display signs and notices denoting such capability on the premises where coins or currency are accepted or dispensed, including on each vending machine.
This paragraph does not apply with respect to business operations conducted by any entity under a contract with an agency or instrumentality of the United States, including with any nonappropriated fund instrumentality established under title 10.
(2)
Publicity.—
The Director of the United States Mint,
2
So in original. The comma probably should not appear.
shall work closely with consumer groups, media outlets, and schools to ensure an adequate amount of news coverage, and other means of increasing public awareness, of the inauguration of the Presidential $1 Coin Program established in subsection (n) to ensure that consumers know of the availability of the coin.
(3)
Coordination.—
The Board of Governors of the Federal Reserve System and the Secretary shall take steps to ensure that an adequate supply of $1 coins is available for commerce and collectors at such places and in such quantities as are appropriate by—
(A)
consulting, to accurately gauge demand for coins and to anticipate and eliminate obstacles to the easy and efficient distribution and circulation of $1 coins as well as all other circulating coins, from time to time but no less frequently than annually, with a coin users group, which may include—
(i)
representatives of merchants who would benefit from the increased usage of $1 coins;
(ii)
vending machine and other coin acceptor manufacturers;
(iii)
vending machine owners and operators;
(v)
municipal parking officials;
(vi)
depository institutions;
(vii)
coin and currency handlers;
(viii)
armored-car operators;
(ix)
car wash operators; and
(x)
coin collectors and dealers;
(B)
submitting an annual report to the Congress containing—
(i)
an assessment of the remaining obstacles to the efficient and timely circulation of coins, particularly $1 coins;
(ii)
an assessment of the extent to which the goals of subparagraph (C) are being met; and
(iii)
such recommendations for legislative action the Board and the Secretary may determine to be appropriate;
(C)
consulting with industry representatives to encourage operators of vending machines and other automated coin-accepting devices in the United States to accept coins issued under the Presidential $1 Coin Program established under subsection (n) and any coins bearing any design in effect before the issuance of coins required under subsection (n) (including the so-called “Sacagawea-design” $1 coins), and to include notices on the machines and devices of such acceptability;
(D)
ensuring that—
(i)
during an introductory period, all institutions that want unmixed supplies of each newly-issued design of $1 coins minted under subsections (n) and (o) are able to obtain such unmixed supplies; and
(ii)
circulating coins will be available for ordinary commerce in packaging of sizes and types appropriate for and useful to ordinary commerce, including rolled coins;
(E)
working closely with any agency, instrumentality, system, or entity referred to in paragraph (1) to facilitate compliance with the requirements of such paragraph; and
(F)
identifying, analyzing, and overcoming barriers to the robust circulation of $1 coins minted under subsections (n) and (o), including the use of demand prediction, improved methods of distribution and circulation, and improved public education and awareness campaigns.
(4)
Bullion dealers.—
The Director of the United States Mint shall take all steps necessary to ensure that a maximum number of reputable, reliable, and responsible dealers are qualified to offer for sale all bullion coins struck and issued by the United States Mint.
(5)
Review of co-circulation.—
At such time as the Secretary determines to be appropriate, and after consultation with the Board of Governors of the Federal Reserve System, the Secretary shall notify the Congress of its assessment of issues related to the co-circulation of any circulating $1 coin bearing any design, other than the so-called “Sacagawea-design” $1 coin, in effect before the issuance of coins required under subsection (n), including the effect of co-circulation on the acceptance and use of $1 coins, and make recommendations to the Congress for improving the circulation of $1 coins.
(t)
Redesign and Issuance of Quarter Dollars Emblematic of National Sites in Each State, the District of Columbia, and Each Territory.—
(1)
Redesign beginning upon completion of prior program.—
(A)
In general.—
Notwithstanding the fourth sentence of subsection (d)(1) and subsection (d)(2), quarter dollars issued beginning in 2010 shall have designs on the reverse selected in accordance with this subsection which are emblematic of the national sites in the States, the District of Columbia and the territories of the United States.
(B)
Flexibility with regard to placement of inscriptions.—
Notwithstanding subsection (d)(1), the Secretary may select a design for quarter dollars referred to in subparagraph (A) in which—
(i)
the inscription described in the second sentence of subsection (d)(1) appears on the reverse side of any such quarter dollars; and
(ii)
any inscription described in the third sentence of subsection (d)(1) or the designation of the value of the coin appears on the obverse side of any such quarter dollars.
(C)
Inclusion of district of columbia, and territories.—
For purposes of this subsection, the term “State” has the same meaning as in section 3(a)(3) of the Federal Deposit Insurance Act.
(2)
Single site in each state.—
The design on the reverse side of each quarter dollar issued during the period of issuance under this subsection shall be emblematic of 1 national site in each State.
(3)
Selection of site and design.—
(A)
Site.—
(i)
In general.—
The selection of a national park or other national site in each State to be honored with a coin under this subsection shall be made by the Secretary of the Treasury, after consultation with the Secretary of the Interior and the governor or other chief executive of each State with respect to which a coin is to be issued under this subsection, and after giving full and thoughtful consideration to national sites that are not under the jurisdiction of the Secretary of the Interior so that the national site chosen for each State shall be the most appropriate in terms of natural or historic significance.
(ii)
Timing.—
The selection process under clause (i) shall be completed before the end of the 270-day period beginning on the date of the enactment of the America’s Beautiful National Parks Quarter Dollar Coin Act of 2008.
(B)
Design.—
Each of the designs required under this subsection for quarter dollars shall be—
(i)
selected by the Secretary after consultation with—
(I)
the Secretary of the Interior; and
(II)
the Commission of Fine Arts; and
(ii)
reviewed by the Citizens Coinage Advisory Committee.
(C)
Selection and approval process.—
Recommendations for site selections and designs for quarter dollars may be submitted in accordance with the site and design selection and approval process developed by the Secretary in the sole discretion of the Secretary.
(D)
Participation in design.—
The Secretary may include participation by officials of the State, artists from the State, engravers of the United States Mint, and members of the general public.
(E)
Standards.—
Because it is important that the Nation’s coinage and currency bear dignified designs of which the citizens of the United States can be proud, the Secretary shall not select any frivolous or inappropriate design for any quarter dollar minted under this subsection.
(F)
Prohibition on certain representations.—
No head and shoulders portrait or bust of any person, living or dead, no portrait of a living person, and no outline or map of a State may be included in the design on the reverse of any quarter dollar under this subsection.
(4)
Issuance of coins.—
(A)
Order of issuance.—
The quarter dollar coins issued under this subsection bearing designs of national sites shall be issued in the order in which the sites selected under paragraph (3) were first established as a national site.
(B)
Rate of issuance.—
The quarter dollar coins bearing designs of national sites under this subsection shall be issued at the rate of 5 new designs during each year of the period of issuance under this subsection.
(C)
Number of each of 5 coin designs in each year.—
Of the quarter dollar coins issued during each year of the period of issuance, the Secretary of the Treasury shall prescribe, on the basis of such factors as the Secretary determines to be appropriate, the number of quarter dollars which shall be issued with each of the designs selected for such year.
(5)
Treatment as numismatic items.—
For purposes of sections 5134 and 5136, all coins minted under this subsection shall be considered to be numismatic items.
(6)
Issuance.—
(A)
Quality of coins.—
The Secretary may mint and issue such number of quarter dollars of each design selected under paragraph (3) in uncirculated and proof qualities as the Secretary determines to be appropriate.
(B)
Silver coins.—
Notwithstanding subsection (b), the Secretary may mint and issue such number of quarter dollars of each design selected under paragraph (3) as the Secretary determines to be appropriate, with a content of not less than 90 percent silver.
(7)
Period of issuance.—
(A)
In general.—
Subject to paragraph (2), the program established under this subsection shall continue in effect until a national site in each State has been honored.
(B)
Second round at discretion of secretary.—
(i)
Determination.—
The Secretary may make a determination before the end of the 9-year period beginning when the first quarter dollar is issued under this subsection to continue the period of issuance until a second national site in each State, the District of Columbia, and each territory referred to in this subsection has been honored with a design on a quarter dollar.
(ii)
Notice and report.—
Within 30 days after making a determination under clause (i), the Secretary shall submit a written report on such determination to the Committee on Financial Services of the House of Representatives and the Committee on Banking, Housing, and Urban Affairs of the Senate.
(iii)
Applicability of provisions.—
If the Secretary makes a determination under clause (i), the provisions of this subsection applicable to site and design selection and approval, the order, timing, and conditions of issuance shall apply in like manner as the initial issuance of quarter dollars under this subsection, except that the issuance of quarter dollars pursuant to such determination bearing the first design shall commence in order immediately following the last issuance of quarter dollars under the first round.
(iv)
Continuation until all states are honored.—
If the Secretary makes a determination under clause (i), the program under this subsection shall continue until a second site in each State has been so honored.
(8)
Designs after end of program.—
Upon the completion of the coin program under this subsection, the design on—
(A)
the obverse of the quarter dollar shall revert to the same design containing an image of President Washington in effect for the quarter dollar before the institution of the 50-State quarter dollar program; and
(B)
notwithstanding the fourth sentence of subsection (d)(1), the reverse of the quarter dollar shall contain an image of General Washington crossing the Delaware River prior to the Battle of Trenton.
(9)
National site.—
For purposes of this subsection, the term “national site” means any site under the supervision, management, or conservancy of the National Park Service, the United States Forest Service, the United States Fish and Wildlife Service, or any similar department or agency of the Federal Government, including any national park, national monument, national battlefield, national military park, national historical park, national historic site, national lakeshore, seashore, recreation area, parkway, scenic river, or trail and any site in the National Wildlife Refuge System.
(10)
Application in event of independence.—
If any territory becomes independent or otherwise ceases to be a territory or possession of the United States before quarter dollars bearing designs which are emblematic of such territory are minted pursuant to this subsection, this subsection shall cease to apply with respect to such territory.
(aa)
Standards and General Provisions for Circulating Collectible Coins Under Subsections (x), (y), and (z).—
(1)
Prohibition on certain representations.—
No head and shoulders portrait or bust of any person, living or dead, and no portrait of a living person may be included in the design on the reverse of any coin under subsections (x), (y), and (z).
(2)
Treatment as numismatic items.—
For purposes of sections 5134 and 5136, all coins and medals minted under subsections (x), (y), and (z) shall be considered to be numismatic items.
(3)
Issuance.—
(A)
Quality of coins.—
The Secretary may mint and issue such number of coins of each design selected under subsections (x), (y), and (z) in uncirculated and proof qualities as the Secretary determines to be appropriate.
(B)
Coordination.—
The Board of Governors of the Federal Reserve System and the Secretary shall take steps to ensure that an adequate supply of coins produced under subsections (x), (y), and (z) are available for commerce and collectors at such places and in such quantities as are appropriate.
(C)
Number of each coin designs in each year.—
Of the coins issued during each year of the period of issuance under subsections (x), (y), and (z), the Secretary shall prescribe, on the basis of such factors as the Secretary determines to be appropriate, the number of coins which shall be issued with each of the designs selected for such year.
(D)
Special inscriptions or symbol across the coins.—
The Secretary is encouraged to develop and include on any coin issued in accordance with subsections (x), (y), or (z), a unifying inscription, privy mark, or other symbol for that particular coin program.
(4)
Legal tender.—
The coins minted under subsections (x), (y), and (z) shall be legal tender, as provided in section 5103.
(5)
Marketing and educational campaign.—
In an effort to advance the collecting of the coins and medals authorized under subsections (x), (y), and (z), and numismatics in general, the Secretary may develop and execute a marketing, advertising, promotional, and educational program to promote the collecting of the coins and medals authorized under subsections (x), (y), and (z). As part of this program, the Secretary is encouraged to seek out appropriate cooperative marketing opportunities, and to develop ancillary derivative products beyond traditional numismatic products such as sports, women, and youth oriented products appropriate to the particular coin and medal program.
(6)
Quality of medals.—
It is the sense of Congress that the medals authorized under subsection (z) be produced in high relief and, if feasible and cost effective, with surface treatments such as frosting and colorization.
([Pub. L. 97–258], Sept. 13, 1982, [96 Stat. 981]; [Pub. L. 97–452, § 1(20)], Jan. 12, 1983, [96 Stat. 2477]; [Pub. L. 99–61, title II, § 202], July 9, 1985, [99 Stat. 115]; [Pub. L. 99–185, § 2(a)], (b), Dec. 17, 1985, [99 Stat. 1177]; [Pub. L. 100–274], §§ 4(a), 6, Mar. 31, 1988, [102 Stat. 50]; [Pub. L. 102–390, title II], §§ 226(a), 227, 228, Oct. 6, 1992, [106 Stat. 1630]; [Pub. L. 103–272, § 4(f)(1)(R)], July 5, 1994, [108 Stat. 1362]; [Pub. L. 104–208, div. A, title I, § 101(f) [title V, §§ 523, 524, 529(a)]], Sept. 30, 1996, [110 Stat. 3009–314], 3009–347 to 3009–349; [Pub. L. 105–124], §§ 3, 4(b)–(d), Dec. 1, 1997, [111 Stat. 2534], 2536; [Pub. L. 105–176], May 29, 1998, [112 Stat. 104]; [Pub. L. 106–445, § 2(b)], Nov. 6, 2000, [114 Stat. 1931]; [Pub. L. 108–15, title I], §§ 102, 103(d)(1), Apr. 23, 2003, [117 Stat. 615], 619; [Pub. L. 109–145, title I], §§ 102–104, title II, § 201, Dec. 22, 2005, [119 Stat. 2665–2669], 2672; [Pub. L. 110–82], §§ 2, 3, Sept. 20, 2007, [121 Stat. 777], 779; [Pub. L. 110–147], Dec. 21, 2007, [121 Stat. 1817]; [Pub. L. 110–161, div. D, title VI], §§ 622–623(b), Dec. 26, 2007, [121 Stat. 2016], 2018; [Pub. L. 110–456, title I, § 102], title II, § 201, Dec. 23, 2008, [122 Stat. 5039], 5042; [Pub. L. 111–8, div. D, title VI, § 616], Mar. 11, 2009, [123 Stat. 677]; [Pub. L. 111–302], §§ 4, 5, Dec. 14, 2010, [124 Stat. 3273]; [Pub. L. 111–303, § 2], Dec. 14, 2010, [124 Stat. 3275]; [Pub. L. 114–94, div. G, title LXXIII, § 73001(1)], Dec. 4, 2015, [129 Stat. 1785]; [Pub. L. 115–91, div. A, title VIII, § 885], Dec. 12, 2017, [131 Stat. 1505]; [Pub. L. 115–197, § 2], July 20, 2018, [132 Stat. 1515]; [Pub. L. 115–232, div. A, title X, § 1081(e)(1)], Aug. 13, 2018, [132 Stat. 1986]; [Pub. L. 116–330], §§ 2–6, Jan. 13, 2021, [134 Stat. 5101–5106].)