42 USC 16237 - Wind energy research and development

U.S Code last checked for updates: Nov 23, 2024

§ 16237.

Wind energy research and development

(a)

Definitions

In this section:

(1)

Critical material

(2)

Economically distressed area

(3)

Eligible entity

The term “eligible entity” means—

(A)

an institution of higher education, including a minority-serving institution;

(B)

a National Laboratory;

(C)

a Federal research agency;

(D)

a State research agency;

(E)

a research agency associated with a territory or freely associated state;

(F)

a Tribal energy development organization;

(G)

an Indian Tribe;

(H)

a Tribal organization;

(I)

a Native Hawaiian community-based organization;

(J)

a nonprofit research organization;

(K)

an industrial entity;

(L)

any other entity, as determined by the Secretary; and

(M)

a consortium of 2 or more entities described in subparagraphs (A) through (L).

(4)

Indian Tribe

(5)

Institution of higher education

The term “institution of higher education” means—

(A)

an institution of higher education (as defined in section 1001(a) of title 20); or

(B)

a postsecondary vocational institution (as defined in section 1002(c) of title 20).

(6)

Minority serving institution

(7)

National Laboratory

(8)

Native Hawaiian community-based organization

(9)

Program

(10)

Secretary

(11)

Territory or freely associated state

(12)

Tribal energy development organization

(13)

Tribal organization

(b)

Wind energy technology program

(1)

Establishment

(A)

In general

(B)

Purposes

The purposes of the program are the following:

(i)

To improve the energy efficiency, cost effectiveness, reliability, resilience, security, siting, integration, manufacturability, installation, decommissioning, and recyclability of wind energy technologies.

(ii)

To optimize the performance and operation of wind energy components, turbines, and systems, including through the development of new materials, hardware, and software.

(iii)

To optimize the design and adaptability of wind energy technologies to the broadest practical range of geographic, atmospheric, offshore, and other site conditions, including—

(I)

at varying hub heights; and

(II)

through the use of computer modeling.

(iv)

To support the integration of wind energy technologies with the electric grid and other energy technologies and systems.

(v)

To reduce the cost, risk, and other potential negative impacts across the lifespan of wind energy technologies, including—

(I)

manufacturing, siting, permitting, installation, operations, maintenance, decommissioning, and recycling; and

(II)

through the development of solutions to transportation barriers to wind components.

(vi)

To reduce and mitigate potential negative impacts of wind energy technologies on human communities, the environment, or commerce.

(vii)

To address barriers to the commercialization and export of wind energy technologies.

(viii)

To support the domestic wind industry, workforce, and supply chain.

(C)

Targets

(2)

Activities

(A)

Types of activities

In carrying out the program, the Secretary shall carry out research, development, demonstration, and commercialization activities, including—

(i)

awarding grants and awards, on a competitive, merit-reviewed basis;

(ii)

performing precompetitive research and development;

(iii)

establishing or maintaining demonstration facilities and projects, including through stewardship of existing facilities such as the National Wind Test Center;

(iv)

providing technical assistance;

(v)

entering into contracts and cooperative agreements;

(vi)

providing small business vouchers;

(vii)

establishing prize competitions;

(viii)

conducting education and outreach activities;

(ix)

conducting professional development activities; and

(x)

conducting analyses, studies, and reports.

(B)

Subject areas

The Secretary shall carry out research, development, demonstration, and commercialization activities in the following subject areas:

(i)

Wind power plant siting, performance, operations, and security.

(ii)

New materials and designs relating to all hardware, software, and components of wind energy technologies, including technologies and strategies that reduce the use of energy, water, critical materials, and other commodities that are determined to be vulnerable to disruption.

(iii)

Advanced wind energy manufacturing and installation technologies and practices, including materials, processes, such as onsite or near site manufacturing, and design.

(iv)

Offshore wind-specific projects and plants, including—

(I)

fixed and floating substructure systems, materials, and components;

(II)

the operation of offshore facilities, such as—

(aa)

an offshore research facility to conduct research for oceanic, biological, geological, and atmospheric resource characterization relevant to offshore wind energy development in coordination with the ocean and atmospheric science communities; and

(bb)

an offshore support structure testing facility to conduct development, demonstration, and commercialization of large-scale and full-scale offshore wind energy support structure components and systems;

(III)

the monitoring and analysis of site and environmental considerations unique to offshore sites, including freshwater environments.

(v)

Integration of wind energy technologies with—

(I)

the electric grid, including transmission, distribution, microgrids, and distributed energy systems; and

(II)

other energy technologies, including—

(aa)

other generation sources;

(bb)

demand response technologies; and

(cc)

energy storage technologies.

(vi)

Methods to improve the lifetime, maintenance, decommissioning, recycling, reuse, and sustainability of wind energy components and systems, including technologies and strategies to reduce the use of energy, water, critical materials, and other valuable or harmful inputs.

(vii)

Wind power forecasting and atmospheric measurement systems, including for turbines and plant systems of varying height.

(viii)

Integrated wind energy systems, grid-connected and off-grid, that incorporate diverse—

(I)

generation sources;

(II)

loads; and

(III)

storage technologies.

(ix)

Reducing market barriers, including non-hardware and information-based barriers, to the adoption of wind energy technologies, such as impacts on, or challenges relating to—

(I)

distributed wind technologies, including the development of best practices, models, and voluntary streamlined processes for local siting and permitting of distributed wind energy systems to reduce costs;

(II)

airspace;

(III)

military operations;

(IV)

radar;

(V)

local communities, with special consideration given to economically distressed areas, previously disturbed lands such as landfills and former mines, and other areas disproportionately impacted by environmental pollution;

(VI)

wildlife and wildlife habitats; and

(VII)

any other appropriate matter, as determined by the Secretary.

(x)

Technologies or strategies to avoid, minimize, and offset the potential impacts of wind energy facilities on bird species, bat species, marine wildlife, and other sensitive species and habitats.

(xi)

Advanced physics-based and data analysis computational tools, in coordination with the high-performance computing programs of the Department, to more efficiently design, site, permit, manufacture, install, operate, decommission, and recycle wind energy systems.

(xii)

Technologies for distributed wind, including micro, small, and medium turbines and the components of those turbines and their microgrid applications.

(xiii)

Transformational technologies for harnessing wind energy.

(xiv)

Other research areas that advance the purposes of the program, as determined by the Secretary.

(C)

Prioritization

In carrying out activities under the program, the Secretary shall, to the maximum extent practicable, give special consideration to—

(i)

projects that—

(I)

are located in a geographically diverse range of eligible entities;

(II)

support the development or demonstration of projects—

(aa)

in economically distressed areas and areas disproportionately impacted by pollution; and

(bb)

that provide the greatest potential to reduce energy costs, as well as promote accessibility and community implementation of demonstrated technologies;

(III)

can be replicated in a variety of regions and climates;

(IV)

include business commercialization plans that have the potential for—

(aa)

domestic manufacturing and production of wind energy technologies; or

(bb)

exports of wind energy technologies; and

(V)

are carried out in collaboration with Tribal energy development organizations, Indian Tribes, Tribal organizations, Native Hawaiian community-based organizations, minority-serving institutions, or territories or freely associated States; and

(ii)

with regards to professional development, activities that expand the number of individuals from underrepresented groups pursuing and attaining skills relevant to wind energy.

(D)

Coordination

(E)

Use of funds

(F)

Solicitation

(G)

Report

(i)

In general

(ii)

Contents

(3)

Wind technician training grant program

(4)

Wind energy technology recycling research, development, and demonstration program

(A)

In general

In addition to the program activities described in paragraph (2), in carrying out the program, the Secretary shall award financial assistance to eligible entities for research, development, and demonstration, and commercialization projects to create innovative and practical approaches to increase the reuse and recycling of wind energy technologies, including—

(i)

by increasing the efficiency and cost effectiveness of the recovery of raw materials from wind energy technology components and systems, including enabling technologies such as inverters;

(ii)

by minimizing potential environmental impacts from the recovery and disposal processes;

(iii)

by advancing technologies and processes for the disassembly and recycling of wind energy devices;

(iv)

by developing alternative materials, designs, manufacturing processes, and other aspects of wind energy technologies and the disassembly and resource recovery process that enable efficient, cost effective, and environmentally responsible disassembly of, and resource recovery from, wind energy technologies; and

(v)

strategies to increase consumer acceptance of, and participation in, the recycling of wind energy technologies.

(B)

Dissemination of results

The Secretary shall make available to the public and the relevant committees of Congress the results of the projects carried out through financial assistance awarded under subparagraph (A), including—

(i)

development of best practices or training materials for use in the wind energy technology manufacturing, design, installation, decommissioning, or recycling industries;

(ii)

dissemination at industry conferences;

(iii)

coordination with information dissemination programs relating to recycling of electronic devices in general;

(iv)

demonstration projects; and

(v)

educational materials.

(C)

Priority

(D)

Sensitive information

(5)

Wind energy technology materials physical property database

(A)

In general

(B)

Coordination

In establishing the database described in subparagraph (A), the Secretary shall coordinate and, to the extent practicable, avoid duplication with—

(i)

other Department activities, including those carried out by the Office of Science;

(ii)

the Director of the National Institute of Standards and Technology;

(iii)

the Administrator of the Environmental Protection Agency;

(iv)

the Secretary of the Interior; and

(v)

relevant industry stakeholders, as determined by the Secretary.

(6)

Wind energy program strategic vision

(A)

In general

(B)

Preparation

The Secretary shall coordinate the preparation of the report under subparagraph (A) with—

(i)

existing peer review processes;

(ii)

studies conducted by the National Laboratories; and

(iii)

the multiyear program planning required under section 16358 of this title.

(7)

Authorization of appropriations

(Pub. L. 116–260, div. Z, title III, § 3003, Dec. 27, 2020, 134 Stat. 2497.)

cite as: 42 USC 16237