1. On 01/15/2020, Commerce published in the Federal Register its initiation of the countervailing duty investigations of forged steel fluid end blocks from China, Germany, India, and Italy (85 FR 2385). The effective date of this initiation is 01/08/2020 (the applicable date stated in the FR notice).

2. The products covered by these investigations are forged steel fluid end blocks (fluid end blocks), whether in finished or unfinished form, and which are typically used in the manufacture or service of hydraulic pumps.

The term 'forged' is an industry term used to describe the grain texture of steel resulting from the application of localized compressive force. Illustrative forging standards include, but are not limited to, American Society for Testing and Materials (ASTM) specifications A668 and A788.

For purposes of these investigations, the term 'steel' denotes metal containing the following chemical elements, by weight: (i) iron greater than or equal to 60 percent; (ii) nickel less than or equal to 8.5 percent; (iii) copper less than or equal to 6 percent; (iv) chromium greater than or equal to 0.4 percent, but less than or equal to 20 percent; and (v) molybdenum greater than or equal to 0.15 percent, but less than or equal to 3 percent. Illustrative steel standards include, but are not limited to, American Iron and Steel Institute (AISI) or Society of Automotive Engineers (SAE) grades 4130, 4135, 4140, 4320, 4330, 4340, 8630, 15-5, 17-4, F6NM, F22, F60, and XM25, as well as modified varieties of these grades.

The products covered by these investigations are: (1) cut-to-length fluid end blocks with an actual height (measured from its highest point) of 8 inches (203.2 mm) to 40 inches (1,016.0 mm), an actual width (measured from its widest point) of 8 inches (203.2 mm) to 40 inches
(1,016.0 mm), and an actual length (measured from its longest point) of 11 inches (279.4 mm) to 75 inches (1,905.0 mm); and (2) strings of fluid end blocks with an actual height (measured from its highest point) of 8 inches (203.2 mm) to 40 inches (1,016.0 mm), an actual width (measured from its widest point) of 8 inches (203.2 mm) to 40 inches (1,016.0 mm), and an actual length (measured from its longest point) up to 360 inches (9,144.0 mm).

The products included in the scope of these investigations have a tensile strength of at least 70 KSI (measured in accordance with ASTM A370) and a hardness of at least 140 HBW (measured in accordance with ASTM E10).

A fluid end block may be imported in finished condition (i.e., ready for incorporation into a pump fluid end assembly without further finishing operations) or unfinished condition (i.e., forged but still requiring one or more finishing operations before it is ready for incorporation into a pump fluid end assembly). Such finishing operations may include: (1) heat treating; (2) milling one or more flat surfaces; (3) contour machining to custom shapes or dimensions; (4) drilling or boring holes; (5) threading holes; and/or (6) painting, varnishing, or coating.

The products included in the scope of these investigations may enter under Harmonized Tariff Schedule of the United States (HTSUS) subheadings 7218.91.0030, 7218.99.0030, 7224.90.0015, 7224.90.0045, 7326.19.0010, 7326.90.8688, or 8413.91.9055. While these HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the investigation is dispositive.

3. These proceedings have been assigned case numbers C-570-116 (China), C-428-848 (Germany), C-533-894 (India), and C-475-841 (Italy).

4. If there are any questions by the importing public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce at (202) 482-0984. CBP ports should submit their inquiries through authorized CBP channels only. (This message was generated by OVIII:JJD.)

5. There are no restrictions on the release of this information.

Alexander Amdur