MESSAGE NO: 3344111 DATE: 12 09 1992
CATEGORY: CVD TYPE: PRE
REFERENCE: REFERENCE DATE:
CASES: C - 475 - 207 C - 475 - 209
- - - -
- - - -

PERIOD COVERED: 12 07 1992 TO

LIQ SUSPENSION DATE: 12 07 1992

TO: REGIONAL DIRECTORS, COMMERCIAL OPERATIONS
DISTRICT DIRECTORS, AREA AND PORT DIRECTORS

FROM: DIRECTOR, IMPORT SPECIALIST DIVISION

RE: PRELIMINARY AFFIRMATIVE COUNTERVAILING DUTY DETERMINATION
OF CERTAIN STEEL FROM ITALY


1. THE DEPARTMENT OF COMMERCE PUBLISHED IN THE FEDERAL REGISTER
ON DECEMBER 7, 1992, NOTICE OF ITS PRELIMINARY DETERMINATIONS
THAT CERTAIN BENEFITS WHICH CONSTITUTE SUBSIDIES WITHIN THE
MEANING OF THE COUNTERVAILING DUTY LAW ARE BEING PROVIDED TO THE
PRODUCERS, MANUFACTURERS, OR EXPORTERS OF CERTAIN STEEL PRODUCTS
FROM ITALY.

2. THE PRODUCTS COVERED BY THESE INVESTIGATIONS, CERTAIN STEEL
PRODUCTS. CONSTITUTE THE FOLLOWING TWO SEPARATE "CLASSES OR
KINDS" OF MERCHANDISE, AS OUTLINED BELOW. ALTHOUGH THE
HARMONIZED TARIFF SCHEDULE OF THE UNITED STATES (HTS) SUBHEADINGS
ARE PROVIDED FOR CONVENIENCE AND CUSTOMS PURPOSES, OUR WRITTEN
DESCRIPTION OF THE SCOPE OF THIS PROCEEDING IS DISPOSITIVE.


CERTAIN COLD-ROLLED CARBON STEEL FLAT PRODUCTS:

THESE PRODUCTS INCLUDE COLD-ROLLED (COLD-REDUCED) CARBON STEEL
FLAT PRODUCTS OF SOLID RECTANGULAR (OTHER THAN SQUARE) CROSS
SECTION, OF RECTANGULAR SHAPE, NEITHER CLAD, PLATED NOR COATED
WITH METAL, WHETHER OR NOT PAINTED, VARNISHED OR COATED WITH
PLASTICS OR OTHER NONMETALLIC SUBSTANCES, IN COILS, OR IN
STRAIGHT LENGTHS WHICH, IF OF A THICKNESS LESS THAN 4.75
MILLIMETERS, ARE OF A WIDTH MEASURING AT LEAST 10 TIMES THE
THICKNESS OR IF OF A THICKNESS OF 4.75 MILLIMETERS OR MORE ARE OF
A WIDTH WHICH EXCEEDS 150 MILLIMETERS AND MEASURES AT LEAST TWICE
THE THICKNESS, AS CURRENTLY CLASSIFIABLE IN THE HTS UNDER ITEM
NUMBERS

7209.11.0000, 7209.12.0030, 7209.12.0090, 7209.13.0030,
7209.13.0090, 7209.14.0030, 7209.14.0090, 7209.21.0000,
7209.22.0000, 7209.23.0000, 7209.24.1000, 7209.24.5000,
7209.31.0000, 7209.32.0000, 7209.33.0000, 7209.34.0000,
7209.41.0000, 7209.42.0000, 7209.43.0000, 7209.44.0000,
7209.90.0000, 7210.70.3000, 7210.90.9000, 7211.30.1030,
7211.30.1090, 7211.30.3000, 7211.30.5000, 7211.41.1000,
7211.41.3030, 7211.41.3090, 7211.41.5000, 7211.41.7030,
7211.41.7060, 7211.41.7090, 7211.49.1030, 7211.49.1090,
7211.49.3000, 7211.49.5030, 7211.49.5060, 7211.49.5090,
7211.90.0000, 7212.40.1000, 7212.40.5000, AND 7212.50.0000.


CERTAIN CUT-TO-LENGTH CARBON STEEL PLATE:

THESE PRODUCTS INCLUDE HOT-ROLLED CARBON STEEL UNIVERSAL MILL
PLATES (I.E., FLAT-ROLLED PRODUCTS ROLLED ON FOUR FACES OR IN A
CLOSED BOX PASS, OF A WIDTH EXCEEDING 150 MILLIMETERS BUT NOT
EXCEEDING 1.250 MILLIMETERS AND OF A THICKNESS OF NOT LESS THAN 4
MILLIMETERS, NOT IN COILS AND WITHOUT PATTERNS IN RELIEF) OF
SOLID RECTANGULAR (OTHER THAN SQUARE) CROSS SECTION, OF
RECTANGULAR SHAPE, NEITHER CLAD, PLATED NOR COATED WITH METAL,
WHETHER OR NOT PAINTED, VARNISHED, OR COATED WITH PLASTICS OR
OTHER NONMETALLIC SUBSTANCES: AND CERTAIN HOT-ROLLED CARBON STEEL
FLAT PRODUCTS IN STRAIGHT LENGTHS, OF SOLID RECTANGULAR (OTHER
THAN SQUARE) CROSS SECTION, OF RECTANGULAR SHAPE, HOT ROLLED
NEITHER CLAD PLATED, NOR COATED WITH METAL, WHETHER OR NOT
PAINTED, VARNISHED, OR COATED WITH PLASTICS OF OTHER NONMETALLIC
SUBSTANCES, 4.75 MILLIMETERS OR MORE IN THICKNESS AND OF A WIDTH
WHICH EXCEEDS 150 MILLIMETERS AND MEASURES AT LEAST TWICE THE
THICKNESS, AS CURRENTLY CLASSIFIABLE IN THE HTS UNDER ITEM
NUMBERS 7208.31.0000, 7208.32.0000, 7208.33.1000, 7208.33.5000,
7208.41.0000, 7208.42.0000, 7208.43.0000, 7208.90.0000,
7210.70.3000, 7210.90.9000, 7211.11.0000, 7211.12.0000,
7211.21.0000, 7211.22.0045, 7211.90.0000, 7212.40.1000,
7212.40.5000, AND 7212.50.0000.

3. THE U.S. CUSTOMS SERVICE SHALL SUSPEND LIQUIDATION OF ALL
ENTRIES OF CERTAIN STEEL PRODUCTS FROM ITALY WHICH ARE ENTERED OR
WITHDRAWN FROM WAREHOUSE, FOR CONSUMPTION ON OR AFTER
DECEMBER 7, 1992, AND SHALL REQUIRE A CASH DEPOSIT OR BOND FOR
SUCH ENTRIES OF THE MERCHANDISE AS FOLLOWS:

MANUFACTURES/PRODUCERS/ CUSTOMS ID MARGIN/
EXPORTERS NUMBER PERCENT


CERTAIN COLD-ROLLED CARBON STEEL FLAT PRODUCTS
FALCK C-475-207-001 2.22
ALL OTHER C-475-207-000 58.79

CERTAIN CUT-TO-LENGTH CARBON STEEL PLATE
FALCK C-475-209-001 2.22
ALL OTHER C-475-209-000 58.79

4. FOR FURTHER REPORTING PURPOSES, THESE COUNTERVAILING DUTY
CASES HAVE BEEN ASSIGNED INVESTIGATION NUMBER C-475-808. THE
CASE NUMBER ENCOMPASSES THE TWO CLASSES OR KINDS OF MERCHANDISE
UNDER INVESTIGATION. FOR CUSTOMS REPORTING PURPOSES EACH CLASS OR
KIND HAS BEEN ASSIGNED A SEPARATE CASE NUMBER: COLD-ROLLED
(C-475-207) AND PLATE (C-475-209).

5. IF THERE ARE ANY QUESTIONS REGARDING THIS MATTER BY CUSTOMS
OFFICERS, THEY SHOULD CONTACT THE IMPORT SPECIALIST DIVISION.
OTHER AGENCY BRANCH VIA E-MAIL BY USING ATTRIBUTE "HQ OAB". THE
IMPORTING PUBLIC AND OTHER INTERESTED PARTIES SHOULD REFER THEIR
QUESTIONS TO ROSS COTJANLE OR BETH GRAHAM, OFFICE OF
COUNTERVAILING INVESTIGATIONS, IMPORT ADMINISTRATION,
INTERNATIONAL TRADE ADMINISTRATION, U.S. DEPARTMENT OF COMMERCE,
TELEPHONE: (202) 482-3534 OR (202) 482-4105 RESPECTIVELY.

6. THE AD/CVD MODULE MAY NOT BE UPDATED TO REFLECT THESE CHANGES
UNTIL M ONDAY, DECEMBER 14, 1992. THEREFORE, ABI ENTRIES OF THIS
MERCHANDISE SUBMITTED AS TYPE 03 ENTRIES WILL BE REJECTED BY ACS.
ENTRIES REJECTED FOR THIS REASON SHOULD BE RE-SUBMITTED ON
DECEMBER 14, 1992. LATE-FILE PENALTIES DUE TO THESE SYSTEM
REJECTS WILL BE WAIVED.

7. THERE ARE NO RESTRICTIONS ON THE RELEASE OF THIS INFORMATION.

NANCY MCTIERNAN