1. On 12/22/2016, Commerce published in the Federal Register its initiation of the countervailing duty investigation of certain softwood lumber products from Canada (81 FR 93897).

2. The merchandise covered by this investigation is softwood lumber, siding, flooring and certain other coniferous wood (“softwood lumber products”). The scope includes:

• Coniferous wood, sawn, or chipped lengthwise, sliced or peeled, whether or not planed, whether or not sanded, or whether or not finger-jointed, of an actual thickness exceeding six millimeters.
• Coniferous wood siding, flooring, and other coniferous wood (other than moldings and dowel rods), including strips and friezes for parquet flooring, that is continuously shaped (including, but not limited to, tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded) along any of its edges, ends, or faces, whether or not planed, whether or not sanded, or whether or not end-jointed.
• Coniferous drilled and notched lumber and angle cut lumber.
• Coniferous lumber stacked on edge and fastened together with nails, whether or not with plywood sheathing.
• Components or parts of semi-finished or unassembled finished products made from subject merchandise that would otherwise meet the definition of the scope above.

Softwood lumber product imports are generally entered under Chapter 44 of the Harmonized Tariff Schedule of the United States (“HTSUS”). This chapter of the HTSUS covers “Wood and articles of wood.” Softwood lumber products that are subject to this investigation are currently classifiable under the following ten-digit HTSUS subheadings in Chapter 44:

4407.10.01.01; 4407.10.01.02; 4407.10.01.15; 4407.10.01.16; 4407.10.01.17; 4407.10.01.18; 4407.10.01.19; 4407.10.01.20; 4407.10.01.42; 4407.10.01.43; 4407.10.01.44; 4407.10.01.45; 4407.10.01.46; 4407.10.01.47; 4407.10.01.48; 4407.10.01.49; 4407.10.01.52; 4407.10.01.53; 4407.10.01.54; 4407.10.01.55; 4407.10.01.56; 4407.10.01.57; 4407.10.01.58; 4407.10.01.59; 4407.10.01.64; 4407.10.01.65; 4407.10.01.66; 4407.10.01.67; 4407.10.01.68; 4407.10.01.69; 4407.10.01.74; 4407.10.01.75; 4407.10.01.76; 4407.10.01.77; 4407.10.01.82; 4407.10.01.83; 4407.10.01.92; 4407.10.01.93; 4409.10.05.00; 4409.10.10.20; 4409.10.10.40; 4409.10.10.60; 4409.10.10.80; 4409.10.20.00; 4409.10.90.20; 4409.10.90.40; and 4418.90.25.00.

Subject merchandise as described above may also be classified as stringers, square cut box-spring-frame components, fence pickets, truss components, pallet components, flooring, and door and window frame parts under the following ten-digit HTSUS subheadings in Chapter 44:

4415.20.40.00; 4415.20.80.00; 4418.90.46.05; 4418.90.46.20; 4418.90.46.40; 4418.90.46.95; 4421.90.70.40; 4421.90.94.00; and 4421.90.97.80.

Although these HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the investigation is dispositive.

3. This investigation has been assigned investigation number C-122-858.

4. If there are any questions by the importing public regarding this message, please contact the Call Center for the Office of AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce at (202) 482-0984. CBP ports should submit their inquiries through authorized CBP channels only. (This message was generated by OIII:PMT.)

5. There are no restrictions on the release of this information.

Alexander Amdur