CustomsMobile Pro beta now open!
Apply for a FREE beta account. Spaces are limited so apply today.
§ 420.50 - Applicability; description of the vacuum degassing subcategory.
§ 420.51 - [Reserved]
§ 420.52 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
§ 420.53 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
§ 420.54 - New source performance standards (NSPS).
§ 420.55 - Pretreatment standards for existing sources (PSES).
§ 420.56 - Pretreatment standards for new sources (PSNS).
§ 420.57 - [Reserved]
The provisions of this subpart are applicable to discharges and to the introduction of pollutants into publicly owned treatment works resulting from vacuum degassing operations conducted by applying a vacuum to molten steel.
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
Subpart E
1 Within the range of 6.0 to 9.0.
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
The discharge of wastewater pollutants from any new source subject to this subpart shall not exceed the values set forth below.
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources.
Any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources.