The provisions of this subpart are applicable to discharges of pollutants resulting from the processes which laminate a plastic sheet between two layers of glass, and which prepare the glass for lamination such as cutting, bending and washing, to produce automobile windshields.
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart.
Except as provided in §§ 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
| Effluent characteristic
| Effluent limitations
|
|---|
| Maximum for any 1 day
| Average of daily values for 30 consecutive days shall not exceed—
|
|---|
| | Metric units (q/sq m of product)
|
| TSS | 4.40 | 4.40
|
| Oil | 1.76 | 1.76
|
| Phosphorus | 1.07 | 1.07
|
| pH | (
1) | (
1)
|
| | English units (lb/1,000 sq ft of product)
|
| TSS | 0.90 | 0.90
|
| Oil | 0.36 | .36
|
| Phosphorus | 0.22 | .22
|
| pH | (
1) | (
1)
|
The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
| Effluent characteristic
| Effluent limitations
|
|---|
| Maximum for any 1 day
| Average of daily values for 30 consecutive days shall not exceed—
|
|---|
| | Metric units (q/sq m of products)
|
| Phosphorus | 0.30 | .30
|
| | English units (lb/1,000 sq ft of product)
|
| Phosphorus | 0.06 | .06 |
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new point source subject to the provisions of this subpart:
| Effluent characteristic
| Effluent limitations
|
|---|
| Maximum for any 1 day
| Average of daily values for 30 consecutive days shall not exceed—
|
|---|
| | Metric units (q/sq m of product)
|
| TSS | 0.88 | 0.88
|
| Oil | 1.76 | 1.76
|
| Phosphorus | 0.30 | .30
|
| pH | (
1) | (
1)
|
| | English units (lb/1,000 lb of product)
|
| TSS | 0.18 | 0.18
|
| Oil | 0.36 | .36
|
| Phosphorus | 0.06 | .06
|
| pH | (
1) | (
1)
|
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
[60 FR 33959, June 29, 1995]
Except as provided in §§ 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations shall be the same as those specified for conventional pollutants (which are defined in § 401.16) in § 426.72 of this subpart for the best practicable control technology currently available (BPT).
[51 FR 25000, July 9, 1986]
authority: Secs. 301, 304 (b) and (c), 306 (b) and (c), 307(c), and 316(b) of the Federal Water Pollution Control Act, as amended;
33 U.S.C. 1251,
1311,
1314,
1316,
1317; 86 Stat. 816
source: 39 FR 2565, Jan. 22, 1974, unless otherwise noted.
cite as: 40 CFR 426.72