This subpart applies to discharges to waters of the United States and to the introduction of process wastewater pollutants into publicly owned treatment works from any plant which manufactures veneer and does not store or hold raw materials in wet storage conditions.
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by application of the best practicable control technology currently available (BPT):
(a) The following limitations constitute the maximum permissible discharge for all veneer manufacturing installations other than those referred to in paragraphs (b) and (c) of this section: There shall be no discharge of process wastewater pollutants into navigable waters.
(b) The following limitations constitute the maximum permissible discharge for softwood veneer manufacturing processes which use direct steaming for the conditioning of logs:
| Pollutant or pollutant property
| BPT effluent limitations
|
|---|
| Maximum for any 1 day
| Average of daily values for 30 consecutive days shall not exceed
|
|---|
| | Metric units (kilograms per cubic meter of production)
|
| BOD5 | 0.72 | 0.24
|
| pH | (
1) | (
1)
|
| | English units (pounds per cubic foot of production)
|
| BOD5 | 0.045 | 0.015
|
| pH | (
1) | (
1)
|
(c) The following limitations constitute the maximum permissible discharge for hardwood veneer manufacturing processes which use direct steaming for the conditioning of logs:
| Pollutant or pollutant property
| BPT effluent limitations
|
|---|
| Maximum for any 1 day
| Average of daily values for 30 consecutive days shall not exceed
|
|---|
| | Metric units (kilograms per cubic meter of production)
|
| BOD5 | 1.62 | 0.54
|
| pH | (
1) | (
1)
|
| | English units (pounds per cubic foot of production)
|
| BOD5 | 0.10 | 0.034
|
| pH | (
1) | (
1)
|
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of best available technology economically achievable (BAT): There shall be no discharge of process wastewater pollutants into navigable waters.
Any new source subject to this subpart must achieve the following new source performance standards (NSPS): There shall be no discharge of process wastewater pollutants into navigable waters.
Any existing source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
Any new source subject to this subpart which introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403.
authority: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(a)(b) and (c) and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”);
33 U.S.C. 1311,
1314,
c,
e,
and, 1316(b) and
c, 1317(b) and
c,
and; 86 Stat. 815, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217
source: 46 FR 8285, Jan. 26, 1981, unless otherwise noted.
cite as: 40 CFR 429.30