Note 1: Classified defense articles and services are not eligible for export under the Canadian exemptions. U.S. origin articles, technical data, and services controlled in USML Category XVII are not eligible for export under the UK Treaty exemption. U.S. origin classified defense articles and services are not eligible for export under either the UK or AS Treaty exemptions except when being released pursuant to a U.S. Department of Defense written request, directive, or contract that provides for the export of the defense article or service.

Note 2: The phrase “any part of the spectrum” includes radio frequency (RF), infrared (IR), electro-optical, visual, ultraviolet (UV), acoustic, and magnetic. Defense articles related to reduced observables or counter reduced observables are defined as:

(a) Signature reduction (radio frequency (RF), infrared (IR), Electro-Optical, visual, ultraviolet (UV), acoustic, magnetic, RF emissions) of defense platforms, including systems, subsystems, components, materials (including dual-purpose materials used for Electromagnetic Interference (EM) reduction), technologies, and signature prediction, test and measurement equipment and software, and material transmissivity/reflectivity prediction codes and optimization software.

(b) Electronically scanned array radar, high power radars, radar processing algorithms, periscope-mounted radar systems (PATRIOT), LADAR, multistatic and IR focal plane array-based sensors, to include systems, subsystems, components, materials, and technologies.

Note 3: Defense articles and services related to sensor fusion beyond that required for display or identification correlation is defined as techniques designed to automatically combine information from two or more sensors/sources for the purpose of target identification, tracking, designation, or passing of data in support of surveillance or weapons engagement. Sensor fusion involves sensors such as acoustic, infrared, electro optical, frequency, etc. Display or identification correlation refers to the combination of target detections from multiple sources for assignment of common target track designation.

Note 4: Software source code beyond that source code required for basic operation, maintenance, and training for programs, systems, and/or subsystems is not eligible for use of the UK or AS Treaty exemptions, unless such export is pursuant to a written solicitation or contract issued or awarded by the U.S. Department of Defense for an end-use identified in paragraph (e)(1), (e)(2), or (e)(4) of § 126.16 or § 126.17 of this subchapter and is consistent with other exclusions of this supplement.

Note 5: Manufacturing know-how, as defined in § 120.43(g) of this subchapter, is not eligible for use of the UK or AS Treaty exemptions, unless such export is pursuant to a written solicitation or contract issued or awarded by the U.S. Department of Defense for an end-use identified in paragraph (e)(1), (2), or (4) of § 126.16 or § 126.17 of this subchapter and is consistent with other exclusions of this supplement.

Note 6: Defense articles and services specific to Man Portable Air Defense Systems (MANPADS) includes missiles that can be used without modification in other applications. It also includes production and test equipment and components specifically designed or modified for MANPAD systems, as well as training equipment specifically designed or modified for MANPAD systems.

Note 7: Naval nuclear propulsion plants includes all of USML Category VI(e). Naval nuclear propulsion information consists of technical data that concern the design, arrangement, development, manufacture, testing, operation, administration, training, maintenance, and repair of the propulsion plants of naval nuclear-powered ships and prototypes, including the associated shipboard and shore-based nuclear support facilities. Examples of defense articles covered by this exclusion include nuclear propulsion plants and nuclear submarine technologies or systems; nuclear powered vessels (see USML Categories VI and XX).

Note 8: A complete gas turbine engine with embedded hot section components or digital engine controls is eligible for export or transfer under the Treaties. Technical data, other than those data required for routine external maintenance and operation, related to the hot section is not eligible for export under the Canadian exemption. Technical data, other than those data required for routine external maintenance and operation, related to the hot section or digital engine controls, as well as individual hot section parts or components are not eligible for the Treaty exemption whether shipped separately or accompanying a complete engine. Gas turbine engine hot section exempted defense article components and technology are combustion chambers and liners; high pressure turbine blades, vanes, disks and related cooled structure; cooled low pressure turbine blades, vanes, disks and related cooled structure; cooled augmenters; and cooled nozzles. Examples of gas turbine engine hot section developmental technologies are Integrated High Performance Turbine Engine Technology (IHPTET), Versatile, Affordable Advanced Turbine Engine (VAATE), and Ultra-Efficient Engine Technology (UEET), which are also excluded from export under the exemptions.

Note 9: Examples of countermeasures and counter-countermeasures related to defense articles not exportable under the AS or UK treaty exemptions are:

(a) IR countermeasures;

(b) Classified techniques and capabilities;

(c) Exports for precision radio frequency (RF) location that directly or indirectly supports fire control and is used for situation awareness, target identification, target acquisition, and weapons targeting and radio direction finding capabilities. Precision RF location is defined as root mean square (RMS) angle of arrival accuracy of less than five degrees (5° RMS) and RF emitter location of less than ten percent (10%) range error;

(d) Providing the capability to reprogram; and

(e) Acoustics (including underwater), active and passive countermeasures, and counter-countermeasures other than the Underwater Acoustic Decoy Countermeasures (ADC) Mk 2 Mods 1 through 7.

Note 10: Examples of defense articles covered by this exclusion include underwater acoustic vector sensors; acoustic reduction; off-board, underwater, active and passive sensing, propeller/propulsor technologies; fixed mobile/floating/powered detection systems which include in-buoy signal processing for target detection and classification; autonomous underwater vehicles capable of long endurance in ocean environments (manned submarines excluded); automated control algorithms embedded in on-board autonomous platforms which enable (a) group behaviors for target detection and classification, (b) adaptation to the environment or tactical situation for enhancing target detection and classification; “intelligent autonomy” algorithms that define the status, group (greater than 2) behaviors, and responses to detection stimuli by autonomous, underwater vehicles; and low frequency, broad band “acoustic color,” active acoustic “fingerprint” sensing for the purpose of long range, single pass identification of ocean bottom objects, buried or otherwise (controlled under Category USML XI(a)(1), (a)(2), (b), (c), and (d)).

Note 11: This exclusion does not apply to the platforms (e.g., vehicles) for which the armored plates are applied. For exclusions related to the platforms, refer to the other exclusions in this list, particularly for the category in which the platform is controlled.

The excluded defense articles include constructions of metallic or non-metallic materials or combinations thereof specially designed to provide protection for military systems. The phrase “suitable for military use” applies to any articles or materials which have been tested to level IIIA or above IAW NIJ standard 0108.01 or comparable national standard. This exclusion does not include military helmets, body armor, or other protective garments which may be exported IAW the terms of the AS or UK Treaty.

Note 12: Defense services or technical data specific to applied research (§ 120.43(i) of this subchapter), design methodology (§ 120.43(c) of this subchapter), engineering analysis (§ 120.43(d) of this subchapter), or manufacturing know-how (§ 120.43(e) of this subchapter) are not eligible for export under the Canadian exemptions. However, this exclusion does not include defense services or technical data specific to build-to-print as defined in § 120.43(f) of this subchapter, build/design-to-specification as defined in § 120.43(g) of this subchapter, or basic research as defined in § 120.43(h) of this subchapter, or maintenance (i.e., inspection, testing, calibration or repair, including overhaul, reconditioning and one-to-one replacement of any defective items parts or components, but excluding any modification, enhancement, upgrade or other form of alteration or improvement that changes the basic performance of the item) of non-excluded defense articles which may be exported subject to other exclusions or terms of the Canadian exemptions.

Note 13: The term “libraries” (parametric technical databases) means a collection of technical information of a military nature, reference to which may enhance the performance of military equipment or systems.

Note 14: In order to utilize the authorized defense services under the Canadian exemption, the following must be complied with:

(a) The Canadian contractor and subcontractor must certify, in writing, to the U.S. exporter that the technical data and defense services being exported will be used only for an activity identified in Supplement No. 1 to part 126 of this subchapter and in accordance with § 126.5 of this subchapter; and

(b) A written arrangement between the U.S. exporter and the Canadian recipient must:

(1) Limit delivery of the defense articles being produced directly to an identified manufacturer in the United States registered in accordance with part 122 of this subchapter; a department or agency of the United States Federal Government; a Canadian-registered person authorized in writing to manufacture defense articles by and for the Government of Canada; a Canadian Federal, Provincial, or Territorial Government;

(2) Prohibit the disclosure of the technical data to any other contractor or subcontractor who is not a Canadian-registered person;

(3) Provide that any subcontract contain all the limitations of § 126.5 of this subchapter;

(4) Require that the Canadian contractor, including subcontractors, destroy or return to the U.S. exporter in the United States all of the technical data exported pursuant to the contract or purchase order upon fulfillment of the contract, unless for use by a Canadian or United States Government entity that requires in writing the technical data be maintained. The U.S. exporter must be provided written certification that the technical data is being retained or destroyed; and

(5) Include a clause requiring that all documentation created from U.S. origin technical data contain the statement that, “This document contains technical data, the use of which is restricted by the U.S. Arms Export Control Act. This data has been provided in accordance with, and is subject to, the limitations specified in § 126.5 of the International Traffic in Arms Regulations (ITAR). By accepting this data, the consignee agrees to honor the requirements of the ITAR.”

(c) The U.S. exporter must provide the Directorate of Defense Trade Controls a semi-annual report regarding all of their on-going activities authorized under § 126.5 of this subchapter. The report shall include the article(s) being produced; the end-user(s); the end-item into which the product is to be incorporated; the intended end-use of the product; and the names and addresses of all the Canadian contractors and subcontractors.

Note 15: This exclusion does not apply to demining equipment in support of the clearance of landmines and unexploded ordnance for humanitarian purposes.

As used in this exclusion, “anti-personnel landmine” means any mine placed under, on, or near the ground or other surface area, or delivered by artillery, rocket, mortar, or similar means or dropped from an aircraft and which is designed to be detonated or exploded by the presence, proximity, or contact of a person; any device or material which is designed, constructed, or adapted to kill or injure and which functions unexpectedly when a person disturbs or approaches an apparently harmless object or performs an apparently safe act; any manually-emplaced munition or device designed to kill, injure, or damage and which is actuated by remote control or automatically after a lapse of time.

Note 16: The radar systems described are controlled in USML Category XI(a)(3)(i) through (v). As used in this entry, the term “systems” includes equipment, devices, software, assemblies, modules, components, practices, processes, methods, approaches, schema, frameworks, and models.

Note 17: This exclusion does not apply to the export of defense articles previously notified to Congress pursuant to § 123.15 or § 124.11 of this subchapter. For use of the Australian and UK exemptions for congressional notification, see § 126.16(o) and § 126.17(o).