| Reference
| Applies to
subpart S
| Comment
|
|---|
| 63.1(a)(1)-(3) | Yes
| |
| 63.1(a)(4) | Yes | Subpart S (this table) specifies applicability of each paragraph in subpart A to subpart S.
|
| 63.1(a)(5) | No | Section reserved.
|
| 63.1(a)(6) | Yes
| |
| 63.1(a)(7)-(9) | No | Sections reserved.
|
| 63.1(a)(10) | No | Subpart S and other cross-referenced subparts specify calendar or operating day.
|
| 63.1(a)(11)-(12) | Yes
| |
| 63.1(b)(1) | No | Subpart S specifies its own applicability.
|
| 63.1(b)(2) | No | Section reserved.
|
| 63.1(b)(3) | Yes
| |
| 63.1(c)(1)-(2) | Yes
| |
| 63.1(c)(3)-(4) | No | Sections reserved.
|
| 63.1(c)(5) | Yes
| |
| 63.1(c)(6) | Yes
| |
| 63.1(d) | No | Section reserved.
|
| 63.1(e) | Yes
| |
| 63.2 | Yes
| |
| 63.3 | Yes
| |
| 63.4(a)(1)-(2) | Yes
| |
| 63.4(a)(3)-(5) | No | Sections reserved.
|
| 63.4(b) | Yes
| |
| 63.4(c) | Yes
| |
| 63.5(a) | Yes
| |
| 63.5(b)(1) | Yes
| |
| 63.5(b)(2) | No | Section reserved.
|
| 63.5(b)(3)-(4) | Yes
| |
| 63.5(b)(5) | No | Section reserved.
|
| 63.5(b)(6) | Yes
| |
| 63.5(c) | No | Section reserved.
|
| 63.5(d) | Yes
| |
| 63.5(e) | Yes
| |
| 63.5(f) | Yes
| |
| 63.6(a) | Yes
| |
| 63.6(b)(1)-(5) | No | Subpart S specifies compliance dates for sources subject to subpart S.
|
| 63.6(b)(6) | No | Section reserved.
|
| 63.6(b)(7) | No | Subpart S specifies compliance dates for sources subject to subpart S.
|
| 63.6(c)(1)-(2) | No | Subpart S specifies compliance dates for sources subject to subpart S.
|
| 63.6(c)(3)-(4) | No | Sections reserved.
|
| 63.6(c)(5) | No | Subpart S specifies compliance dates for sources subject to subpart S.
|
| 63.6(d) | No | Section reserved.
|
| 63.6(e)(1)(i) | No | See § 63.453(q) for general duty requirement.
|
| 63.6(e)(1)(ii) | No
| |
| 63.6(e)(1)(iii) | Yes
| |
| 63.6(e)(2) | No | Section reserved.
|
| 63.6(e)(3) | No
| |
| 63.6(f)(1) | No
| |
| 63.6(f)(2)-(3) | Yes
| |
| 63.6(g) | Yes
| |
| 63.6(h)(1)-(2) | No | Pertains to continuous opacity monitors that are not part of this standard.
|
| 63.6(h)(3) | No | Section reserved.
|
| 63.6(h)(4)-(9) | No | Pertains to continuous opacity monitors that are not part of this standard.
|
| 63.6(i)(1)-(14) | Yes
| |
| 63.6(i)(15) | No | Section reserved.
|
| 63.6(i)(16) | Yes
| |
| 63.6(j) | Yes
| |
| 63.7(a) | Yes
| |
| 63.7(b) | Yes
| |
| 63.7(c) | Yes
| |
| 63.7(d) | Yes
| |
| 63.7(e)(1) | No | Replaced with § 63.457(o), which specifies performance testing conditions under subpart S.
|
| 63.7(e)(2)-(4) | Yes
| |
| 63.7(f) | Yes
| |
| 63.7(g)(1) | Yes
| |
| 63.7(g)(2) | No | Section reserved.
|
| 63.7(g)(3) | Yes
| |
| 63.7(h) | Yes
| |
| 63.8(a)(1)-(2) | Yes
| |
| 63.8(a)(3) | No | Section reserved.
|
| 63.8(a)(4) | Yes
| |
| 63.8(b)(1) | Yes
| |
| 63.8(b)(2) | No | Subpart S specifies locations to conduct monitoring.
|
| 63.8(b)(3) | Yes
| |
| 63.8(c)(1)-(c)(1)(i) | No | See § 63.453(q) for general duty requirement (which includes monitoring equipment).
|
| 63.8(c)(1)(ii) | Yes
| |
| 63.8(c)(1)(iii) | No
| |
| 63.8(c)(2)-(3) | Yes
| |
| 63.8(c)(4) | No | Subpart S allows site specific determination of monitoring frequency in § 63.453(n)(4).
|
| 63.8(c)(5) | No | Pertains to continuous opacity monitors that are not part of this standard.
|
| 63.8(c)(6)-(8) | Yes
| |
| 63.8(d)(1)-(2) | Yes
| |
| 63.8(d)(3) | Yes, except for last sentence, which refers to an SSM plan | SSM plans are not required
|
| 63.8(e) | Yes
| |
| 63.8(f)(1)-(5) | Yes
| |
| 63.8(f)(6) | No | Subpart S does not specify relative accuracy test for CEMs.
|
| 63.8(g) | Yes
| |
| 63.9(a) | Yes
| |
| 63.9(b)(1)-(2) | Yes | Initial notifications must be submitted within one year after the source becomes subject to the relevant standard.
|
| 63.9(b)(3) | No | Section reserved.
|
| 63.9(b)(4)-(5) | Yes
| |
| 63.9(c) | Yes
| |
| 63.9(d) | No | Special compliance requirements are only applicable to kraft mills.
|
| 63.9(e) | Yes
| |
| 63.9(f) | No | Pertains to continuous opacity monitors that are not part of this standard.
|
| 63.9(g)(1) | Yes
| |
| 63.9(g)(2) | No | Pertains to continuous opacity monitors that are not part of this standard.
|
| 63.9(g)(3) | No | Subpart S does not specify relative accuracy tests, therefore no notification is required for an alternative.
|
| 63.9(h)(1)-(3) | Yes
| |
| 63.9(h)(4) | No | Section reserved.
|
| 63.9(h)(5)-(6) | Yes
| |
| 63.9(i) | Yes
| |
| 63.9(j) | Yes
| |
| 63.9(k) | Yes | Only as specified in § 63.9(j).
|
| 63.10(a) | Yes
| |
| 63.10(b)(1) | Yes
| |
| 63.10(b)(2)(i) | No
| |
| 63.10(b)(2)(ii) | No | See § 63.454(g) for recordkeeping of (1) occurrence and duration and (2) actions taken during malfunction.
|
| 63.10(b)(2)(iii) | Yes
| |
| 63.10(b)(2)(iv)-(v) | No
| |
| 63.10(b)(2)(vi)-(xiv) | Yes
| |
| 63.10(b)(3) | Yes
| |
| 63.10(c)(1) | Yes
| |
| 63.10(c)(2)-(4) | No | Sections reserved.
|
| 63.10(c)(5)-(8) | Yes
| |
| 63.10(c)(9) | No | Section reserved.
|
| 63.10(c)(10)-(11) | No | See § 63.454(g) for malfunction recordkeeping requirements.
|
| 63.10(c)(12)-(14) | Yes
| |
| 63.10(c)(15) | No
| |
| 63.10(d)(1)-(2) | Yes
| |
| 63.10(d)(3) | No | Pertains to continuous opacity monitors that are not part of this standard.
|
| 63.10(d)(4) | Yes
| |
| 63.10(d)(5) | No | See § 63.455(g) for malfunction reporting requirements.
|
| 63.10(e)(1) | Yes
| |
| 63.10(e)(2)(i) | Yes
| |
| 63.10(e)(2)(ii) | No | Pertains to continuous opacity monitors that are not part of this standard.
|
| 63.10(e)(3) | Yes
| |
| 63.10(e)(4) | No | Pertains to continuous opacity monitors that are not part of this standard.
|
| 63.10(f) | Yes
| |
| 63.11-63.15 | Yes
| |