Regulations last checked for updates: Nov 22, 2024

Title 40 - Protection of Environment last revised: Nov 20, 2024
All TitlesTitle 40Chapter IPart 63Subpart WWWWAppendix - Table 11 to Subpart WWWW of Part 63—Data Requirements for New and Existing Continuous Lamination and Continuous Casting Lines Complying With a Percent Reduction Limit or a Lbs/Ton Limit on an Averaging Basis
View all text of [None - None]
Appendix - Table 11 to Subpart WWWW of Part 63—Data Requirements for New and Existing Continuous Lamination and Continuous Casting Lines Complying With a Percent Reduction Limit or a Lbs/Ton Limit on an Averaging Basis

As required in § 63.5865, in order to comply with a percent reduction limit or a lbs/ton limit on an averaging basis for continuous lamination lines and continuous casting lines you must determine the data in the following table:

For each . . . That . . . You must determine . . .
1. Wet-out areaIs uncontrolledAnnual uncontrolled wet-out area organic HAP emissions.
2. Wet-out areaa. Has an enclosure that is not a PTEi. The capture efficiency of the enclosure, and
ii. Annual organic HAP emissions that escape the enclosure.
3. Wet-out areaHas an enclosure that is a PTEThat the enclosure meets the requirements of EPA Method 204 of appendix M to 40 CFR part 51 for a PTE.
4. OvenIs uncontrolledAnnual uncontrolled oven organic HAP emissions.
5. Linea. Is controlled or uncontrolledi. The amount of neat resin plus applied, and
ii. The amount of neat gel coat plus applied.
6. Add-on control devicei. Total annual inlet organic HAP emissions, and total annual outlet organic HAP emissions.
authority: 42 U.S.C. 7401
source: 57 FR 61992, Dec. 29, 1992, unless otherwise noted.
© 2014 CustomsMobile | Disclaimer | Privacy | About