(a) NSPS for bis(2-ethylhexyl) phthalate are reserved.
(b) Any new source subject to this subpart must achieve performance standards (i.e., mass of pollutant discharged), which are calculated by multiplying the average process water usage flow rate for the contact cooling and heating water processes at a new source times the following pollutant concentrations:
Subpart A
[Contact cooling and heating water]
| Concentration used to calculate NSPS
|
|---|
| Pollutant or pollutant property
| Maximum for any 1 day (mg/l)
|
|---|
| BOD5 | 26
|
| Oil and grease | 29
|
| TSS | 19
|
| pH | (
1)
|
authority: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307, 308, and 501, Clean Water Act (Federal Water Pollution Control Act Amendments of 1972, as amended by Clean Water Act of 1977) (the “Act”);
33 U.S.C. 1311,
1314,
c,
e, 1316 (b) and
c, 1317 (b) and
c,
1318,
and; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217
source: 49 FR 49047, Dec. 17, 1984, unless otherwise noted.
cite as: 40 CFR 463.14