(a) NSPS for bis(2-ethylhexyl) phthalate, di-n-butyl phthalate, and dimethyl phthalate are reserved.
(b) Any new source subject to this subpart must achieve performance standards (i.e., mass of pollutant discharged), which are calculated by multiplying the average process water usage flow rate for the finishing water processes at a new source times the following pollutant concentrations:
Subpart C
[Finishing water]
| Concentration used to calculate NSPS
|
|---|
| Pollutant or pollutant property
| Maximum for any 1 day (mg/l)
| Maximum for monthly average (mg/l)
|
|---|
| TSS | 130 | 37
|
| pH | (
1) | (
1)
|
authority: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307, 308, and 501, Clean Water Act (Federal Water Pollution Control Act Amendments of 1972, as amended by Clean Water Act of 1977) (the “Act”);
33 U.S.C. 1311,
1314,
c,
e, 1316 (b) and
c, 1317 (b) and
c,
1318,
and; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217
source: 49 FR 49047, Dec. 17, 1984, unless otherwise noted.
cite as: 40 CFR 463.34