Any new source subject to this subpart must achieve the following new source performance standards.
(a) There shall be no discharge of process wastewater pollutants from metal preparation operations.
(b) The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below:
| Pollutant or pollutant property
| Maximum for any 1 day
| Maximum for monthly average
|
|---|
|
|
|
|
|
|---|
| | Mg/m
2 (pounds per million ft
2) of area coated
|
| Chromium | 0.47 | (0.10) | 0.19 | (0.04)
|
| Lead | 0.13 | (0.03) | 0.11 | (0.02)
|
| Nickel | 0.69 | (0.14) | 0.47 | (0.10)
|
| Zinc | 1.29 | (0.27) | 0.53 | (0.11)
|
| Aluminum | 3.82 | (0.78) | 1.56 | (0.32)
|
| Iron | 1.55 | (0.32) | 0.79 | (0.16)
|
| Oil and grease | 12.60 | (2.58) | 12.60 | (2.58)
|
| TSS | 18.91 | (3.87) | 15.12 | (3.10)
|
| pH | (
1) | (
1) | (
1) | (
1)
|
authority: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”);
33 U.S.C. 1311,
1314,
c,
e, 1316 (b) and
c, 1317 (b) and
c,
and; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217
source: 47 FR 53184, Nov. 24, 1982, unless otherwise noted.
cite as: 40 CFR 466.23