Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicy owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources.
(a) There shall be no discharge of process wastewater pollutants from metal preparation operations.
(b) The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below:
Pollutant or pollutant property
| Maximum for any 1 day
| Maximum for monthly average
|
---|
|
|
|
|
---|
| Mg/m
2 (pounds per million ft
2) of area coated
|
Chromium | 0.47 | (0.10) | 0.19 | (0.04)
|
Lead | 0.13 | (0.03) | 0.11 | (0.02)
|
Nickel | 0.69 | (0.14) | 0.47 | (0.10)
|
Zinc | 1.29 | (0.27) | 0.53 | (0.11) |
[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36544, Sept. 6, 1985]
authority: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”);
33 U.S.C. 1311,
1314,
c,
e, 1316 (b) and
c, 1317 (b) and
c,
and; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217
source: 47 FR 53184, Nov. 24, 1982, unless otherwise noted.
cite as: 40 CFR 466.25