Any new source subject to this subpart must achieve the following performance standards.
(a) There shall be no discharge allowance for wastewater pollutants from the degassing operation.
(b) The discharge of wastewater pollutants from the core and ancillary operations except those listed in paragraph (a) shall not exceed the values set forth below:
Subpart C
Core
Pollutant or pollutant property
| NSPS
|
---|
Maximum for any 1 day
| Maximum for monthly average
|
---|
| mg/off-kg (lb/million off-lbs) of aluminum extruded
|
Chromium | 0.13 | 0.051
|
Cyanide | 0.068 | 0.027
|
Zinc | 0.35 | 0.14
|
Aluminum | 2.07 | 0.92
|
Oil and grease | 3.39 | 3.39
|
Suspended solids | 5.10 | 4.07
|
pH | (
1) | (
1)
|
Subpart C
Extrusion Press Leakage
Pollutant or pollutant property
| NSPS
|
---|
Maximum for any 1 day
| Maximum for monthly average
|
---|
| mg/off-kg (lb/million off-lbs) of aluminum extruded
|
Chromium | 0.11 | 0.045
|
Cyanide | 0.060 | 0.024
|
Zinc | 0.31 | 0.126
|
Aluminum | 1.82 | 0.81
|
Oil and grease | 2.98 | 2.98
|
Suspended solids | 4.47 | 3.58
|
pH | (
1) | (
1)
|
Subpart C
Direct Chill Casting Contact Cooling Water
Pollutant or pollutant property
| NSPS
|
---|
Maximum for any 1 day
| Maximum for monthly average
|
---|
| mg/off-kg (lb/million off-lbs) of aluminum cast by semicontinuous methods
|
Chromium | 0.49 | 0.20
|
Cyanide | 0.27 | 0.11
|
Zinc | 1.36 | 0.56
|
Aluminum | 8.12 | 3.60
|
Oil and grease | 13.29 | 13.29
|
Suspended solids | 19.94 | 15.95
|
pH | (
1) | (
1)
|
Subpart C
Press Heat Treatment Contact Cooling Water
Pollutant or pollutant property
| NSPS
|
---|
Maximum for any 1 day
| Maximum for monthly average
|
---|
| mg/off-kg (lb/million off-lbs) of aluminum quenched
|
Chromium | 0.76 | 0.31
|
Cyanide | 0.41 | 0.17
|
Zinc | 2.08 | 0.86
|
Aluminum | 12.45 | 5.52
|
Oil and grease | 20.37 | 20.37
|
Suspended solids | 30.56 | 24.45
|
pH | (
1) | (
1)
|
Subpart C
Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property
| NSPS
|
---|
Maximum for any 1 day
| Maximum for monthly average
|
---|
| mg/off-kg (lb/million off-lbs) of aluminum quenched
|
Chromium | 0.76 | 0.31
|
Cyanide | 0.41 | 0.17
|
Zinc | 2.08 | 0.86
|
Aluminum | 12.45 | 5.52
|
Oil and grease | 20.37 | 20.37
|
Suspended solids | 30.56 | 24.45
|
pH | (
1) | (
1)
|
Subpart C
Cleaning or Etching Bath
Pollutant or pollutant property
| NSPS
|
---|
Maximum for any 1 day
| Maximum for monthly average
|
---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
Chromium | 0.067 | 0.027
|
Cyanide | 0.036 | 0.015
|
Zinc | 0.183 | 0.075
|
Aluminum | 1.094 | 0.485
|
Oil and grease | 1.79 | 1.79
|
Suspended solids | 2.69 | 2.15
|
pH | (
1) | (
1)
|
Subpart C
Cleaning or Etching Rinse
Pollutant or pollutant property
| NSPS
|
---|
Maximum for any 1 day
| Maximum for monthly average
|
---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
Chromium | 0.52 | 0.21
|
Cyanide | 0.28 | 0.11
|
Zinc | 1.42 | 0.59
|
Aluminum | 8.50 | 3.77
|
Oil and grease | 13.91 | 13.91
|
Suspended solids | 20.87 | 16.70
|
pH | (
1) | (
1)
|
Subpart C
Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property
| NSPS
|
---|
Maximum for any 1 day
| Maximum for monthly average
|
---|
| mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
|
Chromium | 0.72 | 0.29
|
Cyanide | 0.39 | 0.16
|
Zinc | 1.97 | 0.81
|
Aluminum | 11.81 | 5.24
|
Oil and grease | 19.33 | 19.33
|
Suspended solids | 29.00 | 23.20
|
pH | (
1) | (
1)
|
[48 FR 49149, Oct. 24, 1983; 49 FR 11633, 11634, Mar. 27, 1984, as amended at 53 FR 52370, Dec. 27, 1988]
authority: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”);
33 U.S.C. 1311,
1314,
c,
e,
and, 1316(b) and
c, 1317(b) and
c,
1318; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4
source: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.
cite as: 40 CFR 467.34