Code of Federal Regulations > Title 40 > Chapter I > Part 53 > Subpart F > Appendix - Figure F-1 to Subpart F of Part 53

Regulations last checked for updates: Nov 22, 2024

Title 40 - Protection of Environment last revised: Nov 20, 2024

Appendix - Figure F-1 to Subpart F of Part 53—Designation Testing Checklist

DESIGNATION TESTING CHECKLIST FOR CLASS II

__________ __________ __________

Auditee Auditor signature Date

Compliance Status: Y = Yes N = No NA = Not applicable/Not available
Verification			Verified by Direct Observation of Process or of Documented Evidence: Performance, Design or Application Spec. Corresponding to Sections of 40 CFR Part 53, Subparts E and F
Y	N	NA
			Subpart E: Performance Specification Tests
			Evaluation completed according to Subpart E § 53.50 to § 53.56
			Subpart E: Class I Sequential Tests
			Class II samplers that are also Class I (sequentialized) have passed the tests in § 53.57
			Subpart F: Performance Spec/Test
			Evaluation of Physical Characteristics of Clean Sampler - One of these tests must be performed: § 53.62 - Full Wind Tunnel § 53.63 - Inlet Aspiration § 53.64 - Static Fractionator
			Evaluation of Physical Characteristics of Loaded Sampler § 53.65 Loading Test One of the following tests must be performed for evaluation after loading: § 53.62, § 53.63, § 53.64
			Evaluation of the Volatile Characteristics of the Class II Sampler § 53.66

authority: Sec. 301(a) of the Clean Air Act (42 U.S.C. sec. 1857g(a)), as amended by sec. 15(c)(2) of Pub. L. 91-604, 84 Stat. 1713, unless otherwise noted

source: 40 FR 7049, Feb. 18, 1975, unless otherwise noted.