OT:RR:CTF:EMAIN H328977 MFT
Ms. Melissa Cannon
Master Magnetics, Inc.
1211 Atchinson Court
Castle Rock, CO 80109
RE: Modification of NY J85077, NY N302039, NY N302895, and NY N314064; Revocation of NY B84458, NY R03088, NY N289369, and NY N290319; Classification of certain permanent magnets and articles with the essential character of permanent magnets
Dear Ms. Cannon:
This letter is in response to your request, submitted September 22, 2020, seeking reconsideration of New York Ruling Letter (NY) N314064 (dated September 14, 2020). That ruling considered the classification under the Harmonized Tariff Schedule of the United States (HTSUS) of a certain three-in-one magnetic sweeper from China. We have re-examined NY N314064 and find its ultimate classification of the merchandise to be correct; however, we hereby modify that ruling to emend certain dicta expressed therein. Furthermore, after reviewing NY N302039 (dated February 5, 2019) and NY N302895 (dated April 3, 2019), we similarly affirm their ultimate classification determinations but hereby modify those rulings as to certain dicta.
We have also reviewed NY J85077 (dated June 19, 2003); NY B84458 (dated May 15, 1997); NY R03088 (dated February 10, 2006); NY N289369 (dated September 13, 2017); and NY N290319 (dated October 18, 2017). Each of these rulings classified certain permanent magnets of materials other than metal under subheading 8505.11.00, HTSUS, which provides for “Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetization; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads; parts thereof: Permanent magnets and articles intended to become permanent magnets after magnetization: Of metal.” We have determined that the tariff classification of these magnets is incorrect and hereby revoke or modify those rulings, accordingly, as explained below.
Pursuant to Section 625(c)(1) of the Tariff Act of 1930 (19 U.S.C. § 1625(c)(1)), as amended by Section 623 of Title VI (Customs Modernization) of the North American Free Trade Agreement Implementation Act, Pub. L. No. 103-182, 107 Stat. 2057, 2186 (1993), notice of the proposed action was published on July 3, 2024, in Volume 58, Number 26, of the Customs Bulletin. No comments were received in response to this notice.
FACTS:
In NY N314064, the merchandise at issue was a three-in-one magnetic sweeper described in the ruling as follows:
The item under consideration is a 3-in-1 magnetic sweeper, part numbers MS3N1-48, MS3N1-60, MS3N1-72, MS3N1-84, and MS3N1-96, designed to magnetically attract ferrous metal debris, such as nails, screws, metal filings, and other metal scrap from floors, walkways, driveways, parking lots, and work areas. The item consists of ceramic magnets (predominantly ferric oxide material) and a steel bar enclosed in a heavy-gauge steel and aluminum housing. Attached is a quick release handle, mounting brackets, removable tow handle, and semi-pneumatic wheels on both sides. As the sweeper moves across the ground, the magnets attract ferrous metal debris. When the quick release handle is pulled, it creates a gap wide enough to dislodge the collected debris, where it can then be cleaned up. The item can be used in several configurations including being pushed or pulled by the handle, mounted using eyebolts on the forks of a forklift, hung from a vehicle, and towed behind a vehicle. Each part number is identical in design with the exception of the sweeping width, which come in 48 inches, 60 inches, 72 inches, 84 inches, or 96 inches.
We noted that the magnetic sweeper was a composite good and that a prior decision classified another composite good under subheading 8505.19.30, HTSUS:
The 3-in-1 magnetic sweeper is a composite good consisting of steel, aluminum, and rubber materials, which make up components including magnets, wheels, a steel bar, a handle and various hardware to form a complete article. It is the opinion of this office that the article is distinguished by the magnetic component, which allows it to function as a magnet. Accordingly, the magnetic portion appears to be of primary importance to the composite article and the component which imparts its essential character. Composite goods in which a magnet is used to “sweep” metal articles have previously been classified in subheading 8505.19.3000. See NY ruling N302895 dated April 3, 2019. [emphasis added]
As such, the applicable subheading for the 3-in-1 magnetic sweeper, part numbers MS3N1-48, MS3N1-60, MS3N1-72, MS3N1-84 and MS3N1-96, will be [subheading] 8505.19.3000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetization; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads; parts thereof: Permanent magnets and articles intended to become permanent magnets after magnetization: Other: Other.
The article at issue in NY N302039 is discussed therein as follows:
The item under consideration is referred to as a Sea Turtle PVC magnet, item number 88277. The item consists of a PVC turtle with a circular magnet affixed to the underside of the turtle. The hard magnet is described as a ceramic (ferrite) magnet that is primarily of iron oxide material. The Sea Turtle PVC magnet allows for notes, pictures, and the like to be secured to metal surfaces. [. . .]
While we agree that the article is classified within heading 8505, we disagree at the subheading level. The Sea Turtle PVC magnet is a composite good that consists of a PVC turtle with a hard magnet. Such articles have been classified in subheading 8505.19.3000. See NYR N019818, dated December 11, 2007[,] and NYR N062663, dated June 11, 2009. [emphasis added]
As such, the applicable subheading for the Sea Turtle PVC magnet, item number 88277 will be 8505.19.3000, Harmonized Tariff Schedule of the United States (HTSUS) [Annotated], which provides for Permanent magnets and articles intended to become permanent magnets after magnetization: Other: Other. The rate of duty will be 4.9 percent ad valorem.
In NY N302895, U.S. Customs and Border Protection (CBP) considered the classification of a magnetic floor sweeper from China and described the article as follows:
The product in question is referred to as the 17” Mini Magnetic Floor Sweeper, item number GRIP 53417. The floor sweeper consists of a ceramic (iron oxide material) magnetic bar that is attached to a steel bar with a rubber grip. Two rubber wheels are attached to the outer sections of the magnetic bar and as the user pushes the steel bar, the floor sweeper rolls over the ground and this allows the magnet, which imparts the essential character, to retrieve metal articles, such as screws and nails.
That ruling similarly considered the fact that the sweeper constituted a composite good and stated as follows:
The 17” Mini Magnetic Floor Sweeper is a composite good that consists of a handle, rollers and a non-flexible magnet that imparts the essential character. Composite goods in which a magnet is used to retrieve metal articles have previously been classified in subheading 8505.19.3000. See NYR N061775 dated May 28, 2009. This office notes that in your letter, you mention that the magnetic floor sweeper is similar to the magnets classified in NYR N289369 and NYR N290319, which classified ceramic magnets in subheading 8505.11.0030. However, this office does not find any of [the] afor[e]mentioned rulings relevant, as the subject floor sweeper is a composite good. [emphasis added]
As such, the applicable subheading for the 17” Mini Magnetic Floor Sweeper, item number GRIP 53417, will be 8505.19.3000, HTSUS, which provides for Permanent magnets and articles intended to become permanent magnets after magnetization: Other: Other. The rate of duty will be 4.9 percent ad valorem.
In NY J85077, the merchandise at issue is described as follows: “The articles in question are described as a sample/addition valve kit, part numbers MCLAVE10X1SAMP and MCLAVE10X10SAMP and a spares [sic] part kit, part number MCLAVE10XSPARES. [. . .] The spare parts kit includes [. . .] 20 stirrer bars, which are essentially Teflon-coated magnets [. . . .]” We classified the stirrer bars under subheading 8505.11.00, HTSUS, as permanent magnets of metal.
In NY B84458, the merchandise under consideration is described as follows:
As indicated by the submitted samples and descriptive literature, “Bye-Bye Birdie” is a device which claims to be successful in keeping birds away from a specified area through the action of a specialized magnetic system which disturbs the geomagnetic field that birds use to find their direction. There are two basic models identified as the “Wing” and the “Ninja”. In both cases, the magnetic system consists of a combination of ferrite magnets and neodymium magnets which are stacked with the magnetic poles in a N-S-N-S orientation.
We found that the “Bye-Bye Birdie” was classifiable under subheading 8505.11.00, HTSUS, as a permanent magnet of metal.
NY R03088 describes the merchandise under consideration as follows:
The merchandise subject of this ruling is identified in your letter as welding magnets. Pictures of these magnets, with Factory Part #s, were included with your submission. The Factory Part #s are MINI 8LBS, 6001 25LBS, 6002 50LBS, and 6003 75LBS. These magnets are used to hold pieces of pipe together while welding them. The composition of the magnets consists of a ceramic center encased in steel. They are basically functional magnets made of steel.
The magnets in NY R03088 were classified under subheading 8505.11.00, HTSUS, as permanent magnets of metal.
CBP also considered the classification of a certain magnet from Taiwan in NY N289369: “Part number MA-3010 disk magnet is a ceramic (ferrite) magnet primarily composed of iron oxide.” We found that the merchandise in that ruling was classified as a permanent magnet of metal under subheading 8505.11.00, HTSUS.
Finally, in NY N290319, the merchandise at issue is described as follows:
Product number 92500 consists of 30 magnets contained in a plastic tub packaged ready for retail sale. The assorted colored magnets are primarily of isotropic ferrite material embedded in a circular shaped cover of plastic material. The magnets are available in three sizes that measure 5/8”, 1 1/8” or 1 1/2” in diameter. The magnets can be used on metal surfaces, such as cabinets and presentation boards.
We held that the thirty magnets were classified under subheading 8505.11.00, HTSUS, as permanent magnets of metal.
ISSUE:
Whether the subject magnets are “of metal,” and thus properly classified in subheading 8505.11, HTSUS, or are properly classified under subheading 8505.19, HTSUS, as magnets of materials other than metal.
LAW AND ANALYSIS:
Classification under the HTSUS is in accordance with the General Rules of Interpretation (GRIs). GRI 1 provides that the classification of goods will be determined according to the terms of the headings of the tariff schedule and any relative section or chapter notes. In the event that the goods cannot be classified solely on the basis of GRI 1, and if the headings and legal notes do not otherwise require, the remaining GRIs 2 through 6 will then be applied in order.
The classification of goods consisting of more than one material or substance follows the principles of GRI 3. In relevant part, GRI 3(b) states that composite goods that cannot be classified by reference to GRI 3(a) are to be classified as if they consisted of the component that gives them their essential character.
GRI 6 provides that for legal purposes, the classification of goods in the subheadings of a heading shall be determined according to the terms of those subheadings and any related subheading notes and, mutatis mutandis, to the above rules, on the understanding that only subheadings at the same level are comparable.
The Harmonized Commodity Description and Coding System Explanatory Notes (ENs) constitute the official interpretation of the HTSUS. Although the ENs are not legally binding or dispositive, they provide commentary on the scope of each heading of the HTSUS and generally indicate the proper interpretation of these headings at the international level.
The HTSUS subheadings under consideration are as follows:
8505 Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetization; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads; parts thereof:
Permanent magnets and articles intended to become permanent magnets after magnetization:
8505.11 Of metal
* * * * *
8505.19 Other:
There is no dispute that the magnets identified in the rulings above impart the essential character of the above-described composite goods, and likewise by application of GRI 3(b), are classified as “permanent magnets” of heading 8505, HTSUS. By application of GRI 6, the classification of each of the permanent magnets shall be determined according to the terms of subheadings 8505.11 and 8505.19, HTSUS. The terms of subheading 8505.11, HTSUS, limit classification therein to permanent magnets (and articles intended to become permanent magnets after magnetization) that are “of metal.” Therefore, if a permanent magnet of heading 8505, HTSUS, is not “of metal,” it does not meet the terms of subheading 8505.11, HTSUS. It follows that permanent magnets of heading 8505, HTSUS, not of metal would be prima facie classifiable under subheading 8505.19, HTSUS, as “other” permanent magnets.
We previously recognized that iron oxide, also known as “ferrite,” is not a metal for purposes of subheading 8505.11, HTSUS. In Headquarters Ruling Letter (HQ) 965543, we considered the tariff classification of a magnetic race car figurine where the article’s magnet was composed of anisotropic ferrite. There, the protestant submitted in the alternative that the figurine should be classified under subheading 8505.11, HTSUS, as a metal magnet. After determining that the magnet imparted the essential character of the figurine under GRI 3(b), we reviewed the physical characteristics of ferrite and found it was not a metal:
The appropriate subheading is 8505.19.00, HTSUS, which provides for permanent magnets made of materials other than metal. Protestant argues that if the subject merchandise is classified under heading 8505, HTSUS, that the appropriate subheading is 8505.11.00, HTSUS, which provides for permanent magnets composed of metal. However, according to protestant’s submission, the subject article’s magnet is composed of anisotropic ferrite. Webster’s II New College Dictionary (Houghton Mifflin Company, 1999), defines ferrite as “[a]ny of a group of nonmetallic, ceramic[-]like, usu. ferromagnetic compounds of ferric oxide with other oxides, esp. such a compound with spinel crystalline structure, marked by high electrical resistivity and used in computer memory elements, permanent magnets, and solid-state devices.” Thus, the magnet’s ferrite composition excludes the merchandise from classification under subheading 8505.11.00, HTSUS. The articles are properly classified under subheading 8505.19.00, HTSUS, as permanent magnets and articles intended to become permanent magnets after magneti[z]ation: other.
We have also read the EN to heading 8505, HTSUS, as distinguishing permanent magnets of ferrite from those “of metal.” The EN provides: “Articles intended to become permanent magnets after magneti[z]ation are recogni[z]able as such by their shape and composition, generally being cubes or discs (tags) of metal or of agglomerated ferrite (e.g., barium ferrite)” [emphasis added]. Based on this distinction, we previously held that the magnet’s composition is the main determinant, and that permanent magnets of ferrite must be classified differently from permanent magnets of metal. For example, in classifying an adhesive magnetic bandage where the permanent magnet imparted the essential character of the good, we stated:
This provision [i.e., “permanent magnets . . .” under heading 8505, HTSUS] is divided into two categories, “of metal,” and “other.” The August 19, 1998, letter which requested this ruling does not describe the composition of the magnets. If the magnets are of ferrrite [sic] or some other non-metallic substance, the merchandise is classified as a permanent magnet “other” than of metal. See EN 85.05 (2) (which notes the distinction between metal and ferrite “...of metal or of agglomerated ferrite”). If the magnets are of metal, then the merchandise falls in the provision for permanent magnets of metal.
Accordingly, we have applied this distinction between ferrite and metal in other decisions. For example in NY C81811, we considered the classification of two types of “cow magnets,” which were designed to be “ingested by cows and remain in the stomach to attract metal shavings and other metallic object which could harm a cow’s intestines if swallowed.” One of the magnets was a ceramic magnet, while the other was an “alnico type [. . .] comprised of various metals, with iron the predominant element.” The classification of the cow magnets turned on their composition. As such, we held that the ceramic magnet was classified under subheading 8505.19, HTSUS, as a permanent magnet of a material other than metal, while the alnico magnet was classified under subheading 8505.11, HTSUS, as a permanent magnet of metal.
Lastly, we emphasize that the mere fact an article consisting of a permanent magnet and another component may constitute a composite good does not, in and of itself, remove the good from the compass of subheading 8505.11, HTSUS. Subject to the relevant facts, rules, and principles of classification – and unless the context otherwise requires – the classification of composite goods consisting of a permanent magnet and another material or substance must follow the principles of GRI 3. If that good cannot be classified by reference to GRI 3(a), then GRI 3(b) instructs that we classify the goods “as if they consisted of the component that gives them their essential character.” If the permanent magnet imparts the essential character of a composite good, the good must be classified as if it consisted solely of the permanent magnet (even if the composite good consists of other materials besides the magnet). Therefore, as far as subheadings 8505.11 and 8505.19, HTSUS, are concerned, such classification would turn on the composition of the magnet alone. Once it is determined that the permanent magnet of heading 8505, HTSUS, imparts the essential character of the composite good, all other materials or components comprising the composite good are irrelevant for purposes of GRI 3(b).
In HQ H217623, we stood for the principle that being a composite good does not necessarily disqualify an article from classification under subheading 8505.11, HTSUS. There, we modified HQ 562821, which wrongly classified certain name badges consisting of “metal magnets encased in plastic” under subheading 8505.19, HTSUS. As we stated:
The magnets at issue consist of the following components: (1) two metal inflexible magnets and (2) plastic holders, holding the magnets. The function of the magnets encased in plastic is to hold the name badges in place, which is accomplished by the two metal magnets. The plastic holders function as mere casing for the magnets. Applying GRI 2(b), we find that the fact that the magnets are encased in plastic does not deprive the good of having the character of a magnet of metal. See EN XII to GRI 2(b). Accordingly, it follows that the subject magnets encased in plastic are classified in subheading 8505.11.00, HTSUS, which provides for magnets of metal.
Modification of NY N302039, NY N302895, and NY N314064
In NY N302039, NY N302895, and NY N314064, we suggested that classification under subheading 8505.19, HTSUS, was appropriate in part because the subject merchandise constituted composite goods. Specifically:
In NY N302039, we stated, “The Sea Turtle PVC magnet is a composite good that consists of a PVC turtle with a hard magnet. Such articles have been classified in subheading 8505.19.3000.”
In NY N302895, we stated, “Composite goods in which a magnet is used to retrieve metal articles have previously been classified in subheading 8505.19.3000. This office notes that in your letter, you mention that the magnetic floor sweeper is similar to the magnets classified in NYR N289369 and NYR N290319, which classified ceramic magnets in subheading 8505.11.0030. However, this office does not find any of [the] afor[e]mentioned rulings relevant, as the subject floor sweeper is a composite good [internal citations omitted].”
In NY N314064, we justified classification of the three-in-one magnet sweeper by stating, “Composite goods in which a magnet is used to ‘sweep’ metal articles have previously been classified in subheading 8505.19.3000.”
Although it is true that the merchandise at issue in each ruling constituted composite goods, this fact alone does not warrant classification under subheading 8505.19, HTSUS. As we discussed above, if it is determined that a permanent magnet of heading 8505, HTSUS, imparts the essential character of a composite good per GRI 3(b), then the good is to be classified as if it consisted solely of the permanent magnet. No other material or component is relevant. To the extent that NY N302039, NY N302895, and NY N314064 expressed dicta suggesting a contrary principle, those rulings are hereby modified.
The watchword here is “dicta”: the errant principle opined in NY N302039, NY N302895, and NY N314064 was not necessary in determining that the goods are classifiable under subheading 8505.19, HTSUS. In each case, the permanent magnets at issue consist of ferrite (iron oxide). Ferrite is not a metal, as explained above. Seeing as the permanent magnets in each of the rulings are composed of non-metal material, they cannot be classified as permanent magnets “of metal” under subheading 8505.11, HTSUS. As a result, the merchandise in NY N302039, NY N302895, and NY N314064 is still classifiable under subheading 8505.19, HTSUS, as “other” permanent magnets. Although the aforementioned erroneous dicta does not trigger the notice and comment requirements of 19 U.S.C. 1625(c), we nevertheless are taking the opportunity to clarify the classification.
Modification of NY J85077 and Revocation of NY B84458, NY R03088, N289369, and N290319
The permanent magnets in NY B84458, NY J85077, NY R03088, NY N289369, and N290319 each are composed, at least in part, of non-metal material that excludes the respective merchandise from classification under subheading 8505.11, HTSUS. Specifically:
In NY B84458, the “Bye-Bye Birdie” magnetic bird repellant device contained ferrite.
In NY J85077, the stirrer bars were coated with Teflon.
In NY R03088, the welding magnets contained a ceramic magnet center.
In NY N289369, the disk magnet was “primarily composed of iron oxide.”
In NY N290319, the thirty magnets were “primarily of isotropic ferrite material.”
None of these materials are “of metal” as specified in subheading 8505.11, HTSUS: ferrite (iron oxide) is not a metal, as explained above; neither is Teflon. Thus, each of these magnets are appropriately classified under subheading 8505.19, HTSUS, as “other” permanent magnets. We therefore modify NY J85077 as to its classification of the stirrer bars and revoke NY B84458, NY R03088, NY N289369, and NY N290319.
HOLDING:
By application of GRIs 1, 3(b), and 6, the subject merchandise is classified in heading 8505, HTSUS, specifically in subheading 8505.19.30, HTSUS, which provides for “Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetization; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads; parts thereof: Permanent magnets and articles intended to become permanent magnets after magnetization: Other: Other.” The general, column one rate of duty is 4.9 percent ad valorem.
Pursuant to U.S. Note 20 to Subchapter III, Chapter 99, HTSUS, products of China classified under subheading 8505.19.30, HTSUS, unless specifically excluded, are subject to an additional 25 percent ad valorem rate of duty. At the time of importation, you must report the Chapter 99 subheading, i.e., 9903.88.03, in addition to subheading 8505.19.30, HTSUS, listed above.
The HTSUS is subject to periodic amendment, so you should exercise reasonable care in monitoring the status of goods covered by the Note cited above and the applicable Chapter 99 subheading. For background information regarding the trade remedy initiated pursuant to Section 301 of the Trade Act of 1974, including information on exclusions and their effective dates, you may refer to the relevant parts of the USTR and CBP websites, which are available at https://ustr.gov/issue-areas/enforcement/section-301-investigations/tariff-actions and https://www.cbp.gov/trade/remedies/301-certain-products-china, respectively.
Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/current.
EFFECT ON OTHER RULINGS:
NY N302039, NY N302895, and NY N314064 are modified as explained above.
NY J85077 is hereby modified as to its classification of stirrer bars.
NY R03088, NY B84458, NY N289369, and NY N290319 are hereby revoked.
In accordance with 19 U.S.C. § 1625(c), this ruling will become effective 60 days after publication in the Customs Bulletin.
Sincerely,
` Yuliya A. Gulis, Director
Commercial and Trade Facilitation Division