This part applies to discharges of process wastewater resulting from the production of meat carcasses, in whole or in part, by high-processing packinghouses. Process wastewater includes water from animal holding areas at these facilities.
For the purpose of this subpart: High-processing packinghouse means a packinghouse which processes both animals slaughtered at the site and additional carcasses from outside sources.
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the application of BPT:
(a) Facilities that slaughter no more than 50 million pounds per year (in units of LWK) must achieve the following limitations:
(1) In the case of process wastewater associated with the slaughtering of animals on-site or the processing of the carcasses of animals slaughtered on-site:
Effluent Limitations
[BPT]
Regulated parameter
| Maximum daily
1
| Maximum monthly avg.
1
|
---|
BOD5
2 | 0.48 | 0.24
|
Fecal Coliform | (
3) | (
4)
|
O&G
5 | 0.26 | 0.13
|
TSS
2 | 0.62 | 0.31
|
(2) In addition to the limitations specified in paragraph (a)(1) of this section, in the case of process wastewater associated with the processing (defleshing, washing and curing) of hides derived from animals slaughtered at locations off-site, the limitations for BOD5 and TSS specified in § 432.12(a)(2) apply.
(3) In addition to the limitations specified in paragraph (a)(1) of this section, in the case of process wastewater associated with the processing of blood derived from animals slaughtered at locations off-site, the limitations for BOD5 and TSS specified in § 432.12(a)(3) apply.
(4) In addition to the limitations specified in paragraph (a)(1) of this section, in the case of process wastewater associated with the wet or low-temperature rendering of material derived from animals slaughtered at locations off-site and dead animals, the limitations for BOD5 and TSS specified in § 432.12(a)(4) apply.
(5) In addition to the limitations specified in paragraph (a)(1) of this section, in the case of process wastewater associated with dry rendering of material derived from animals slaughtered at locations off-site and dead animals, the limitations for BOD5 and TSS specified in § 432.12(a)(5) apply.
(b) Facilities that slaughter more than 50 million pounds per year (in units of LWK) must achieve the following limitations:
(1) All facilities must achieve the following effluent limitations for ammonia (as N):
Effluent Limitations
[BPT]
Regulated parameter
| Maximum daily
1
| Maximum monthly avg.
1
|
---|
Ammonia (as N) | 8.0 | 4.0
|
(2) In the case of process wastewater associated with the slaughtering of animals on-site or the processing of the carcasses of animals slaughtered on-site, the limitations for BOD5, fecal coliform, TSS, and O&G are the same as the limitations specified in paragraph (a)(1) of this section.
(3) In addition to the limitations specified in paragraphs (b)(1) and (2) of this section, in the case of process wastewater associated with the processing (defleshing, washing and curing) of hides derived from animals slaughtered at locations off-site, the limitations for BOD5 and TSS specified in paragraph (a)(2) of this section apply.
(4) In addition to the limitations specified in paragraphs (b)(1) and (2) of this section, in the case of process wastewater associated with the processing of blood derived from animals slaughtered at locations off-site, the limitations for BOD5 and TSS specified in paragraph (a)(3) of this section apply.
(5) In addition to the limitations specified in paragraphs (b)(1) and (2) of this section, in the case of process wastewater associated with wet or low-temperature rendering of material derived from animals slaughtered at locations off-site and dead animals, the limitations for BOD5 and TSS specified in paragraph (a)(4) of this section apply.
(6) In addition to the limitations specified in paragraphs (b)(1) and (2) of this section, in the case of process wastewater associated with the dry rendering of material derived from animals slaughtered at locations off-site and dead animals, the limitations for BOD5 and TSS specified in paragraph (a)(5) of this section apply.
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart that slaughters more than 50 million pounds per year (in units of LWK) must achieve the following effluent limitations representing the application of BAT: Limitations for ammonia (as N) and total nitrogen are the same as specified in § 432.13.
Except as provided in paragraph (c) of this section, any source that is a new source subject to this subpart must achieve the following performance standards:
(a) Facilities that slaughter no more than 50 million pounds per year (in units of LWK) must achieve the following performance standards:
(1) In the case of process wastewater associated with the slaughtering of animals on-site or the processing of the carcasses of animals slaughtered on-site, the standards for BOD5, fecal coliform, TSS, and O&G are the same as the limitations specified in § 432.42(a)(1); and standards for ammonia (as N) are as follows:
Performance Standards
[NSPS]
Regulated parameter
| Maximum daily
1
| Maximum monthly avg.
1
|
---|
Ammonia (as N) | 0.80 | 0.40
|
(2) In addition to the standards specified in paragraph (a)(1) of this section, in the case of process wastewater associated with the processing of blood derived from animals slaughtered at locations off-site, the limitations for BOD5 and TSS specified in § 432.12(a)(3) and the standards for ammonia (as N) specified in § 432.15(a)(2) apply.
(3) In addition to the standards specified in paragraph (a)(1) of this section, in the case of process wastewater associated with the wet or low-temperature rendering of material derived from animals slaughtered at locations off-site and dead animals, the limitations for BOD5 and TSS specified in § 432.12(a)(4) and the standards for ammonia (as N) specified in § 432.15(a)(3) apply.
(4) In addition to the standards specified in paragraph (a)(1) of this section, in the case of process wastewater associated with the dry rendering of material derived from animals slaughtered at locations off-site and dead animals, the limitations for BOD5 and TSS specified in § 432.12(a)(5) and the standards for ammonia (as N) specified in § 432.15(a)(4) apply:
(b) Facilities that slaughter more than 50 million pounds per year (in units of LWK) must achieve the following performance standards:
(1) In the case of process wastewater associated with the slaughtering of animals on-site or the processing of the carcasses of animals slaughtered on-site, the standards for BOD5, fecal coliform, TSS, and O&G are the same as the limitations specified in § 432.42(a)(1); and standards for ammonia (as N) and total nitrogen are the same as the limitations specified in § 432.15(b)(1).
(2) In addition to the standards specified in paragraph (b)(1) of this section, in the case of process wastewater associated with the processing of blood derived from animals slaughtered at locations off-site, the standards for BOD5 and TSS specified in § 432.12(a)(3) apply.
(3) In addition to the standards specified in paragraph (b)(1) of this section, in the case of process wastewater associated with the wet or low-temperature rendering of material derived from animals slaughtered at locations off-site and dead animals, the standards for BOD5 and TSS specified in § 432.12(a)(4) apply in addition to the standards specified in paragraph (b)(1) of this section.
(4) In addition to the standards specified in paragraph (b)(1) of this section, in the case of process wastewater associated with the dry rendering of material derived from animals slaughtered at locations off-site and dead animals, the standards for BOD5 and TSS specified in § 432.12(a)(5) apply.
(c) Any source that was a new source subject to the standards specified in § 432.45 of title 40 of the Code of Federal Regulations, revised as of July 1, 2003, must continue to achieve the standards specified in this section until the expiration of the applicable time period specified in 40 CFR 122.29(d)(1) after which it must achieve the effluent limitations specified in §§ 432.42 and 432.43.
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the application of BCT: Limitations for BOD5, fecal coliform, TSS, and O&G are the same as the corresponding limitation specified in § 432.42.