WHAT THE SUBPART COVERS

• § 63.5680 - What is the purpose of this subpart?

• § 63.5683 - Does this subpart apply to me?

• § 63.5686 - How do I demonstrate that my facility is not a major source?

• § 63.5689 - What parts of my facility are covered by this subpart?

• § 63.5692 - How do I know if my boat manufacturing facility is a new source or an existing source?

• § 63.5695 - When must I comply with this subpart?

STANDARDS FOR OPEN MOLDING RESIN AND GEL COAT OPERATIONS

• § 63.5698 - What emission limit must I meet for open molding resin and gel coat operations?

• § 63.5701 - What are my options for complying with the open molding emission limit?

• § 63.5704 - What are the general requirements for complying with the open molding emission limit?

• § 63.5707 - What is an implementation plan for open molding operations and when do I need to prepare one?

• § 63.5710 - How do I demonstrate compliance using emissions averaging?

• § 63.5713 - How do I demonstrate compliance using compliant materials?

• § 63.5714 - How do I demonstrate compliance if I use filled resins?

DEMONSTRATING COMPLIANCE FOR OPEN MOLDING OPERATIONS CONTROLLED BY ADD-ON CONTROL DEVICES

• § 63.5715 - What operating limits must I meet?

• § 63.5716 - When must I conduct a performance test?

• § 63.5719 - How do I conduct a performance test?

• § 63.5722 - How do I use the performance test data to demonstrate initial compliance?

• § 63.5725 - What are the requirements for monitoring and demonstrating continuous compliance?

STANDARDS FOR CLOSED MOLDING RESIN OPERATIONS

• § 63.5728 - What standards must I meet for closed molding resin operations?

STANDARDS FOR RESIN AND GEL COAT MIXING OPERATIONS

• § 63.5731 - What standards must I meet for resin and gel coat mixing operations?

STANDARDS FOR RESIN AND GEL COAT APPLICATION EQUIPMENT CLEANING OPERATIONS

• § 63.5734 - What standards must I meet for resin and gel coat application equipment cleaning operations?

• § 63.5737 - How do I demonstrate compliance with the resin and gel coat application equipment cleaning standards?

STANDARDS FOR CARPET AND FABRIC ADHESIVE OPERATIONS

• § 63.5740 - What emission limit must I meet for carpet and fabric adhesive operations?

STANDARDS FOR ALUMINUM RECREATIONAL BOAT SURFACE COATING OPERATIONS

• § 63.5743 - What standards must I meet for aluminum recreational boat surface coating operations?

• § 63.5746 - How do I demonstrate compliance with the emission limits for aluminum wipedown solvents and aluminum coatings?

• § 63.5749 - How do I calculate the organic HAP content of aluminum wipedown solvents?

• § 63.5752 - How do I calculate the organic HAP content of aluminum recreational boat surface coatings?

• § 63.5753 - How do I calculate the combined organic HAP content of aluminum wipedown solvents and aluminum recreational boat surface coatings?

• § 63.5755 - How do I demonstrate compliance with the aluminum recreational boat surface coating spray gun cleaning work practice standards?

METHODS FOR DETERMINING HAZARDOUS AIR POLLUTANT CONTENT

• § 63.5758 - How do I determine the organic HAP content of materials?

NOTIFICATIONS, REPORTS, AND RECORDS

• § 63.5761 - What notifications must I submit and when?

• § 63.5764 - What reports must I submit and when?

• § 63.5765 - How do I submit my reports?

• § 63.5767 - What records must I keep?

• § 63.5770 - In what form and for how long must I keep my records?

OTHER INFORMATION YOU NEED TO KNOW

• § 63.5773 - What parts of the General Provisions apply to me?

• § 63.5776 - Who implements and enforces this subpart?

DEFINITIONS

• § 63.5779 - What definitions apply to this subpart?

• Appendix - Table 1 to Subpart VVVV of Part 63—Compliance Dates for New and Existing Boat Manufacturing Facilities

• Appendix - Table 2 to Subpart VVVV of Part 63—Alternative Organic HAP Content Requirements for Open Molding Resin and Gel Coat Operations

• Appendix - Table 3 to Subpart VVVV of Part 63—MACT Model Point Value Formulas for Open Molding Operations 1

• Appendix - Table 4 to Subpart VVVV of Part 63—Operating Limits if Using an Add-on Control Device for Open Molding Operations

• Appendix - Table 5 to Subpart VVVV of Part 63—Default Organic HAP Contents of Solvents and Solvent Blends

• Appendix - Table 6 to Subpart VVVV of Part 63—Default Organic HAP Contents of Petroleum Solvent Groups

• Appendix - Table 7 to Subpart VVVV of Part 63—Applicability and Timing of Notifications

• Appendix - Table 8 to Subpart VVVV of Part 63—Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart VVVV